Quick Setup Guide
NS-F12R6-SS/NS-F12R6-SS-C/NS-F12R6-GM/
NS-F12R6-GM-C/NS-F12R6-CU/NS-F12R6-CU-C
12" Retro Table Fan
PACKAGE CONTENTS
• 12" table fan
• Quick Setup Guide
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE IMPORTANT INSTRUCTIONS
1 Use your fan only as described in this Quick Setup Guide.
2 Do not use your fan if it works intermittently, stops working
entirely, or parts are missing or damaged.
3 To reduce the risk of re or electrical shock, DO NOT use this fan
with any solid-state speed control devices (such as a dimmer
switch) or expose it to water.
4 To help prevent electrical shock, do not immerse your fan, plug,
or power cord in water or spray it with liquids.
5 Close supervision is needed when your fan is being used near
children.
6 Unplug your fan before moving or cleaning it, or when it is not
in use.
7 Never insert ngers or other objects through the grill while the
fan is running.
8 Make sure your fan is on a stable surface during use so it won’t
overturn.
9 Do not use your fan in an open window. Rain may cause an
electrical hazard.
10 Do not use your fan near explosive or ammable fumes.
11 Do not place your fan or its parts near an open ame, stove, or
other heating appliances.
12 Do not use your fan if the cord or plug is damaged. Throw your
fan away or return it to an authorized service facility for
examination and/or repair.
13 Do not use your fan after a malfunction, drop, or if it is is
damaged in any way.
14 To unplug, pull the plug from the power outlet. Never yank on
the power cord.
15 Always use your fan on a dry surface.
16 This fan is intended for household use only. Do not use it for
commercial or industrial use.
17 Do not use this fan near curtains, plants, window treatments, or
other loose fabrics.
18 This fan uses a fuse for overload protection. A blown fuse
indicates that an overload or short-circuit has occurred. If the
fuse blows, unplug the fan from the outlet, then replace the
fuse as indicated (using only a 5 Amp, 125 Volt fuse). If the
replacement fuse blows, a short-circuit may be present and the
product should be thrown away or returned to an authorized
service facility for examination and/or repair.
19 Do not run the power cord under carpeting, throw rugs,
runners, or other coverings. Do not route the cord under
furniture or appliances. Keep the cord away from trac areas
where it could be tripped over.
Polarized plug
• This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to t
in a polarized outlet only one way.
• If the plug does not t fully into the outlet, reverse the plug and try
again. If it still does not t, contact a qualied electrician. Do not
attempt to defeat this safety feature.
Power cord
• To insert the plug, hold it rmly and guide it into the outlet.
• To unplug, hold the plug and remove it from the outlet.
• Never pull or yank on the cord or fan.
• Check the cord for cuts and abrasion marks before each use.
• Do not wrap the cord tightly around the fan. This could stress the
cord where it enters the fan and cause it to fray and break.
FEATURES
Power switch/
speed selection
Oscillation
knob
Fan blade
Grill ring
Grill
Adjustment knob
Base
Before using your new product, please read these instructions to prevent any damage.
USING YOUR FAN
Speed selection
The power switch is incorporated in the speed control switch on the
top of the fan.
0 - The fan is switched o.
1 - The fan operates at a low speed.
2 - The fan operates at a medium speed.
3 - The fan operates at a high speed.
Oscillation
To allow the fan to oscillate, push the knob down next to the fan speed
control. Pull up on the knob if you don’t want it to oscillate.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
W7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
Angle adjustment
1 Loosen the adjustment knob.
2 Adjust the fan to the angle you want, then retighten the knob to
secure the fan at that angle.
Adjustment
knob
REPLACING THE FUSE
Warning: Risk of re. Replace the fuse only with a 5A, 125 Volt fuse. Do
not force the fuse into place.
1 Unplug the fan.
2 Slide open the fuse access cover
on top of the AC power plug.
3 Remove the fuse.
4 Replace the fuse, then slide the fuse access cover closed.
Caution: Do not replace the AC power plug. Discard the product if the
plug is damaged.
CLEANING YOUR FAN
• Unplug the fan.
• Clean plastic parts with mild soap and a damp cloth or sponge.
Thoroughly remove soap lm with clear water.
• Do not splash water or other liquid into the motor.
V3 ENGLISH 14-1430