Insignia NS-E2111 User Manual
NS-E2111_10-1243_QSG_V2_EN.eps 1 1/31/2011 10:55:41 AMNS-E2111_10-1243_QSG_V2_EN.eps 1 1/31/2011 10:55:41 AM
V2
FINAL
FOR PRINT
Quick Setup Guide
NS-E2111 2-way Indoor/Outdoor Speakers
Congratulations on your purchase of a high-quality Insignia product.
Your NS-E2111 Insignia speakers are designed to provide exceptional
performance and value. These speakers are designed to reproduce
music and speech in a home environment at moderate volume levels.
When used within their limits, they will provide many years of
trouble-free performance.
Package contents
Speakers (2) Wall-mount
brackets (2)
Screws (4) Knobs (4) Quick Setup Guide
Setting up your speakers
For best performance, you must connect the speaker wires correctly. All
two-conductor wire is marked in some way to help you do this. One side will
be marked with a colored stripe, a raised rib, or a dierent-color conductor. Use
the marked side for the “red” connections.
Connecting the speakers
1 Connect the red speaker terminals to the red (+) amplier terminals.
2 Connect the black speaker terminals to the black (-) amplier terminals.
To verify connections:
1 Switch your amplier to MONO and place your speakers close to each other.
2 Adjust the balance control so that only one speaker is playing.
3 Listen to the bass level and adjust the balance control so that both speakers
are playing. If the bass decreases when both speakers are playing, one of the
speakers is connected incorrectly, and the positive (+) and negative (-)
terminals should have the speaker cables reversed.
Installing the brackets (optional)
You can connect the speakers to wall-mount brackets for elevated wall
positioning.
1 Screw the wall-mount brackets onto the wall where you want to mount the
speakers. If the location is backed by wall studs, you can use the wood
screws provided. If the location is backed by only dry wall (gypsum board or
other wall material), use wall anchors (not included).
2 Slide a speaker into each mounting bracket.
3 Line up the screw holes (one on top, one on bottom), then screw a knob
into each hole to secure the speaker to the bracket. You can loosen the knob
to adjust the direction the speakers are pointing.
Adjusting volume
• If you hear distortion, immediately reduce the volume. Permanent speaker
damage can occur within seconds. Distortion indicates that the amplier or
speaker is operating beyond its design limits. Do not ignore distortion just
because the volume control is not all the way up.
Most ampliers deliver full power when the volume control is set near the
middle of its range. Using loudness, bass boost, treble boost, or an equalizer
can produce full output at even lower settings, so distortion is the only true
indicator that damage is imminent.
• Almost any speaker can be used with almost any amplier, but almost any
speaker can be damaged by almost any amplier (despite either unit’s
power rating). Insignia’s power recommendations are accurate only if our
assumptions concerning the amplier, the type of music, and the
conditions of use are correct. Our most important assumption is that the
volume is never set above the point of distortion.
Positioning your speakers
Because of their excellent, o-axis response and dispersion, your speakers’
positioning is less critical than for most speakers. Often, placing them where
they t best into the room design is all that is necessary for exceptional
performance. If you are installing your speakers outdoors, select locations
facing your listening area that are protected from rain and snow, and out of
direct sunlight.
Maintaining your speakers
• Maintain the nish of your speakers by wiping the surface with a damp cloth.
• To clean the grilles, you can vacuum them or gently tap them.
Specications
Model NS-E2111
Description 2-way multi-purpose indoor/outdoor speaker
Finish White molded plastic
Grille Perforated metal (white)
Power Use with 5-120 watt equipment
Impedance 8 ohms average
Response 50Hz-22kHz
Sensitivity 89 dB 1W-1 m
Woofer 5 1/4" (13.3 cm) polypropylene with rubber surround
Tweeter 5/8" (1.6 cm) liquid-cooled polycarbonate
Crossover First-order high-pass
Terminals Gold-plated ve-way binding posts
Bracket Painted steel with plastic knobs
Size 9 3/4"
(24.7
Depth includes grille, but not bracket.
With bracket the depth increases to 7.5" (19.1 cm)
× 6 5/8" × 7 1/4" (H × D × W)
× 16.7 × 18.5 cm)
NS-E2111_10-1243_QSG_V2_EN.eps 2 1/31/2011 10:55:51 AMNS-E2111_10-1243_QSG_V2_EN.eps 2 1/31/2011 10:55:51 AM
90-day limited warranty
Insignia Products (“Insignia”) warrants to you, the original purchaser of this
new product (“Product”), that the Product shall be free of defects in the
original manufacture of the material or workmanship for a period of ninety
(90) days from the date of your purchase of the Product (“Warranty Period”).
This Product must be purchased from an authorized dealer of Insignia brand
products and packaged with this warranty statement. This warranty does not
cover refurbished Product. If you notify Insignia during the Warranty Period of
a defect covered by this warranty that requires service, terms of this warranty
apply.
How long does the coverage last?
The Warranty Period lasts for 90 days from the date you purchased the
Product. The purchase date is printed on the receipt you received with the
Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or
workmanship of the Product is determined to be defective by an authorized
Insignia repair center or store personnel, Insignia will (at its sole option): (1)
repair the Product with new or rebuilt parts; or (2) replace the Product at no
charge with new or rebuilt comparable products or parts. Products and parts
replaced under this warranty become the property of Insignia and are not
returned to you. If service of Products or parts are required after the Warranty
Period expires, you must pay all labor and parts charges. This warranty lasts
as long as you own your Insignia Product during the Warranty Period.
Warranty coverage terminates if you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a retail store location, take your original
receipt and the Product to the store you purchased it from. Make sure that
you place the Product in its original packaging or packaging that provides the
same amount of protection as the original packaging. If you purchased the
Product from an online web site, mail your original receipt and the Product to
the address listed on the web site. Make sure that you put the Product in its
original packaging or packaging that provides the same amount of protection
as the original packaging.
To obtain in-home warranty service for a television with a screen 30 inches or
larger, call 1-888-BESTBUY. Call agents will diagnose and correct the issue
over the phone or will have an Insignia-approved repair person dispatched to
your home. Should the Insignia-approved repair person not correct the issue
on the rst call, an Insignia television (size and features to be determined by
Insignia) will be loaned to you until your TV is repaired and returned, at no
charge to you. This feature is only available to Insignia television consumers
residing in the United States.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the product in the
United States, Canada, and Mexico.
What does the warranty not cover?
This warranty does not cover:
• Customer instruction
• Installation
• Set up adjustments
• Cosmetic damage
• Damage due to acts of God, such as lightning strikes
• Accident
• Misuse
• Abuse
• Negligence
• Commercial use
• Modication of any part of the Product, including the antenna
• Plasma display panel damaged by static (non-moving) images applied for
lengthy periods (burn-in).
This warranty also does not cover:
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage supply
• Attempted repair by anyone other than a facility authorized by Insignia to
service the Product
• Products sold as is or with all faults
• Consumables, such as fuses or batteries
• Products where the factory applied serial number has been altered or
removed
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR
EXCLUSIVE REMEDY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA,
LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA
PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE
PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND
CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH
ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY
AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,
SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS,
WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Insignia:
For customer service, call 1-877-467-4289
www.insigniaproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richeld, Minnesota, U.S.A. 55423-3645
© 2011 BBY Solutions, Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in
some countries. All other products and brand names are trademarks of their respective owners.
ENGLISH 10-1243
Loading...