Congratulations on your purchase of a high-quality Insignia product. Your
NS-CLBT01-B or NS-CLBT01-W represents the state of the art in digital
clock radio and Bluetooth design. Your radio is designed for reliable and
trouble-free performance.
2
www.insigniaproducts.com
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth
Important safety instructions
1
Read these instructions.
2
Keep these instructions.
3
Heed all warnings.
4
Follow all instructions.
5
Do not use this apparatus near water.
6
Clean only with dry cloth.
7
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9
Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11
Only use attachments/accessories specified by the manufacturer.
12
Unplug this apparatus during lightning storms or when unused for long
periods of time.
13
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
14
To reduce the risk of fire or electric shock, do not expose this device to
rain, moisture, dripping, or splashing, and no objects filled with liquids,
such as vases, shall be placed on it.
15
The wall plug is the disconnecting device. The plug must remain readily
operable.
16
Batteries should not be exposed to excessive heat such as sunshine, fire, or
the like.
Caution
Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type.
www.insigniaproducts.com
3
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth
Features
Top buttons
3
1
2
Pair / Preset
Sleep
Source
#ItemDescription
5
4
6
1
2
9
8
10
7
SNOOZE / DIMMER
1Pair/Preset buttonPress and hold for six seconds to pair your radio with a Bluetooth
2Sleep buttonPress to set the time or the sleep timer. For more information, see
3 (previous/fast reverse) buttonIn Bluetooth mode, quickly press and release to go to the previous
4 (Alarm 1) buttonPress to set Alarm 1. See “Setting the alarm sound” on page 9 and
5 (next/fast forward) buttonIn Bluetooth mode, quickly press and release to go to the next song.
6 (Alarm 2) buttonPress to set Alarm 2. See “Setting the alarm sound” on page 9 and
7 buttonWhen the alarm turns on, press to turn off the alarm for 10 minutes.
1
2
SNOOZE / DIMMER
device. See “Playing audio from a Bluetooth device” on page 12.
In Bluetooth mode, quickly press and release to start or stop playback.
See “Playing audio from a Bluetooth device” on page 12.
In FM mode, press to program a radio station preset or to tune to a
preset radio station. See “Programming a radio station preset” on
page 11 or “Tuning to a preset radio station” on page 11.
“Setting the time” on page 8 or “Setting the sleep timer” on page 10.
song.
In FM mode, press and hold for one second to go to the next lower
radio station, or quickly press and release to manually tune to a lower
radio frequency.
“Setting the alarm time” on pa ge 9.
In FM mode, press and hold for one second to go to the next higher
radio station, or quickly press and release to manually tune to a higher
radio frequency.
“Setting the alarm time” on pa ge 9.
See “Using the snooze feature” on page 10.
Press to adjust the LCD brightness. See “Adjusting the LCD brightness”
on page 11.
4
www.insigniaproducts.com
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth
#ItemDescription
8Source (source/standby) button When your radio is turned off (in standby mode), press to turn it on.
9 (volume down) buttonPress to decrease the volume. While you are adjusting the volume, the
10 (volume up) buttonPress to increase the volume. While you are adjusting the volume, the
See “Playing your radio” on page 10.
When your radio is turned on, quickly press and release to switch
between playing the radio, a Bluetooth device, or connected audio
device. See “Playing audio from a Bluetooth device“ on page 12 or
“Connecting an audio device” on page 13.
“Volume” icon lights and the current volume level (1 through 15)
appears in the middle of the LCD.
“Volume” icons lights and the current volume level (1 through 15)
appears in the middle of the LCD.
Back
Picture?
5.4V 1.1A USB AUX
123
#ItemDescription
1DC IN jackConnect the AC/DC power adapter to this the jack. See “Connecting the
AC/DC power adapter” on page 8.
2USB portConnect a device with a micro USB or mini USB cable to charge the
device’s battery. See “Charging a device’s battery” on page 13.
3AUX jackConnect an audio device to this jack to play the audio from the device
through the radio speakers. See “Connecting an audio device” on
page 13.
www.insigniaproducts.com
5
LCD
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth
1
Volume Preset AUX FM BLUETOOTH
2
3
12:08
4
5
#IconDescription
1PresetWhen you are programming a radio station preset, the “Preset” icon lights and the next
2VolumeAfter you select the alarm sound, this icon indicates that you can change the volume of the
3Current timeDisplays the current time.
4SleepLights when the sleep timer is active. See “Setting the sleep timer” on page 10.
5Alarm 1Lights when Alarm 1 has been set. See “Setting the alarm time” on page 9.
6AUXLights when a connected audio device is selected as the audio source. See “Connecting an
7BluetoothLights when a paired Bluetooth device is selected as the audio source. See “Playing audio
8FMLights when the radio is selected as the audio source.
9AM/PM“AM” lights after midnight and before noon. “PM” lights after noon and before midnight.
10Bluetooth logoBlink s slowly if you select Bluetooth as the audio source and no Bluetooth device is
11SnoozeLights when your radio is in snooze mode. See “Using the snooze feature” on page 10.
12Battery Lights when no backup batteries are installed or when the backup battery charge is low.
SLEEP
Buzzer
1 Radio
available preset number (P-01 through P-10) appears in the middle of the LCD. When you
exit programming mode, these indicators disappear. See “Programming a radio station
preset” on page 11.
When you tune to a radio station preset, the preset number (P-01 through P-10) appears.
See “Tuning to a preset radio station” on page11.
alarm. See “Setting the alarm sound” on page 9.
While you are adjusting the radio volume, the “Volume” icon lights and the current
volume level (1 through 15) appears in the middle of the LCD. When you stop adjusting
the alarm or radio volume, these indicators disappear.
audio device” on page 13.
from a Bluetooth device” on page 12.
connecte d.
Blinks quickly while pairing with a Bluetooth device.
Lights solid when a Bluetooth device is connected.
See “Playing audio from a Bluetooth device” on page 12.
Buzzer
2 Radio
SNOOZE
AM
PM
MHz
6
7
8
9
10
11
12
13
6
www.insigniaproducts.com
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.