Insignia NS-CAHBTOE01, NS-CAHBTOE01-C User Manual

QUICK SETUP GUIDE

Bluetooth

BLUETOOTH BASIC INDICATION

Bluetooth function indication

ACTION

Power on

OPERATION

Press and hold more than two seconds

LED INDICATION

Blue LED lights for 1.5 seconds

SOUND

“power on”

Over-the-ear Headphones

NSCAHBTOE01 / NSCAHBTOE01C

PACKAGE CONTENTS

• Bluetooth over-the-ear headphones

• USB charging cable

• 3.5 mm audio cable

• Quick Setup Guide

FIND YOUR USER GUIDE ONLINE!

Go to www.insigniaproducts.com, enter your model in the search box, then press ENTER. Next to Features, click Suppor t & Downloads, then next to User Guide, click the language you want.

FEATURES

• Comfortable foam earpads

• Volume control

• Listen to music and talk on the phone wirelessly

• Music playback: 10 hours

• Echo cancellation and noise suppression

• Voice prompts and easy pairing

• High quality sound

# DESCRIPTION

1 + Volume Up

2 (Power/Talk/

Play/Pause/ Pairing) button

3 Next Track Previous Track

4 – Volume Down

5 Indicator LED

6 Microphone

7 3.5 mm audio jack

8 Micro USB port

FUNCTION

Press + to increase the volume.

Press to turn on your stereo headphones. If you receive a phone call, press to talk. Press to pair your headphones with a Bluetooth enabled device.

Press to skip to the previous track/fast rewind. Press to skip to the next track/fast forward.

Press – to decrease the volume.

Shows current status of the headphones.

Allows you to talk on the telephone.

Connect one end of the included audio cable to the headset’s audio jack and the other end to the music devices headphone jack

Plug the micro USB connector into this port to charge your headphones.

Power o

Pairing mode

Play/Pause

Volume Up/Down

Previous Track/Next Track

Fast Rewind/Fast Forward

Incoming call

Answer call

Reject call

Redial

Reset device list

Press and hold more than three seconds

Press and hold more than four seconds in power o mode

Press and release button

Press and release + / - button

Press and release button

Press and hold button

Press and release when a call is incoming

Press and hold when a call is incoming

Double press

Long press button more than ve seconds in power o mode

CHARGING YOUR STEREO HEADPHONES

• When the red indicator LED blinks three times every minute and the voice prompt says “batter y low”, the battery is low. To charge the battery, plug the charging cable into your computer and into the microUSB port on your headphones. The red LED turns on to indicate that the battery is charging and turns o when fully charged.

Red LED lights for 1.5 seconds

Blue and red LED blinking alternately

Blue LED blinks three times every ve seconds when a call is received

Red LED ashes 10 times

USING WITH THE AUDIO CABLE

You can use your headset with non-Bluetooth enabled devices or on airplanes (in which the use of Bluetooth may be restricted) by taking advantage of the headset’s audio jack. Corded operation does not require battery power for music listening. The microphone and the FullSound digital sound enhancement will not work via the audio cable.

Note: Finish your call before connecting the audio jack, as this will switch o battery power and cut an ongoing call.

“power o”

Two short beeps

Two high beeps for maximum volume

Ring tone

One long beep

Two long beeps

Two short beeps

USING YOUR STEREO HEADPHONES

Turning your stereo headphones on and o 1 Place the headphones on your head. 2 Press and hold the button more than two seconds. The LED

blinks blue (when turned on) or red (when turned o) and the voice prompt says “Power on” or “Power o”.

Before using your new product, please read these instructions to prevent any damage.

PAIRING YOUR STEREO HEADPHONES

Notes:

• Range is 33 feet (10 meters)

• Supports easy pairing

• Prompts you by saying “Your device is connected,” when connec ted

• Supports a battery indicator icon on an iOS device

Pairing with a cell phone or MP3 player 1 With your stereo headphones turned o, press and hold for

four seconds. The blue and red LEDs blink alternately.

2 O n your phone or MP3 player, select INSIGNIA NS-CAHBTOE01

from the list of discovered devices, then enter the password 0000 (four zeros) (if required) to pair your headphones.

For more information on pairing Bluetooth devices to your cell

phone or MP3 player, see the device’s documentation.

Note: After the headphones have been successfully paired with the cell

phone or MP3 player, the headphones will automatically reconnect to the phone or MP3 player.

Pairing with a computer running Windows

Note: Before you pair the headphones with the computer, make sure that the

computer is equipped with Bluetooth. Refer to the computer’s documentation or contact the computer manufacturer for more information. If your computer is not Bluetooth compatible, install a Bluetooth USB adapter (dongle).

1 Turn on Bluetooth on the computer. For instructions, see the

computer’s documentation or contact the computer manufacturer.

2 Double-click the Bluetooth icon in the system tray, then click Add

a device (Add Wireless Device using Windows Vista).

3 With the headphones turned o, press and hold for four

seconds. The LED blinks blue and red alternately. Pairing mode is activated.

4 Double-click the INSIGNIA NS-CAHBTOE01 icon on the computer

or highlight the icon, then click Next.

Note: If you are unable to locate the INSIGNIA NS-CAHBTOE01 icon, click

the Search Again button.

5 If required, enter 0000 (four zeros) in the Bluetooth security

code eld, then click Next.

6 After the headphones have been paired, click Close.

Note: To make your headphone the default playback device, refer to the User

Guide.

Pairing with a Mac computer

Note: Before you pair the headphones with the computer, make sure that the

computer is Bluetooth compatible. Refer to the computer’s documentation or contact the computer manufacturer for more information. If your computer is not Bluetooth compatible, install a Bluetooth USB adapter (dongle).

1 Turn on Bluetooth on the computer. For instructions, see the

computer’s documentation or contact the computer manufacturer.

2 Click the Bluetooth status menu. 3 Click Set up Bluetooth Device. The Bluetooth Setup Assistant opens. 4 Click Continue. 5 Select Headset as the device type, then click Continue. 6 With the headphones turned o, press and hold for four seconds.

The LED blinks blue and red alternately. Pairing mode is activated.

7 Select INSIGNIA NS- CAHBTOE01, then click Continue. The

computer gathers information.

8 Click Continue. 9 Enter 0000 (four zeros) into the Passkey eld, then click Continue. 10 Click Quit to nish.

Note: To use the headphones, they must be selected as the default input and

output device on the computer.

11 Click System Preferences, then click Sound. 12 Under Input, select INSIGNIA NS -CAHBTOE01, then under

Output, select INSIGNIA NS-CAHBTOE01.

For more information on using your headphones with Skype, refer to your User Guide.

RESETTING YOUR STEREO HEADPHONES

• To reset your headphones, with your stereo headphones turned o, press and hold the power button for ve seconds. The LED blinks red ten times, indicating that your headphones have entered pairing mode.

SPECIFICATIONS

Bluetooth version:

Supported proles:

Frequency spectrum:

Working distance:

Operating temperature:

Operating time:

Standby time:

Size:

Weight:

Average charging time:

Bluetooth 4.1

A2DP, AVRCP, HFP, HSP

2.4 ~ 2.4835 GHz ISM Band

Up to 33 ft. (10 m)

23 ~ 122° F (-5 ~ 50° C)

Talk: 10 hours Music: 10 hours, playback music track

Up to 200 hours

6.3 × 2.9 × 7.1 inches (16.1 × 7.3 × 18.0 cm)

6.42 oz (182 g)

Two hours

TROUBLESHOOTING

• Reset your BT headphone

• Plug in the micro USB cable for charging

LEGAL NOTICES

FCC statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution:

Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Statement: Note: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment o and on, the user is encouraged to try and correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

RSS-Gen & RSS-247 Statement:

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

RSS-102 Statement

This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé. Operation of this device is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this equipment or device must accept any interference received, including interference that may cause undesired operation.

ONEYEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:

1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com

Made in China

V2 ENGLISH 18-0300