Insignia NS-C1205C User Manual

52” Black Metal and Glass Open Frame TV Stand
NS-C1205C
USER GUIDE
SAFETY INFORMATION AND SPECIFICATIONS....2
PACKAGE CONTENTS: PARTS.....................................3
PACKAGE CONTENTS: HARDWARE..........................4
ASSEMBLY INSTRUCTIONS.........................................5
CARE AND MAINTENANCE...................................... 11
52” OPEN FRAME TV STAND
Maximum weight: Top s he lf : 100 lbs. (45.5 kg) Middle shelf: 100 lbs. (45.4 kg) Bottom shelf: 100 lbs. (45.4 kg) Maximum width: 1-inch overhang on each side
of the top shelf Overall dimensions: (W × H × D): 52 × 20.31 × 19.75" (132 × 51.58 × 50.16 cm) Top s he lf (W × D): 52 × 19.75" (132 × 50.16 cm)
Middle shelf (W × H × D):
36.25 × 5.75 × 17" (92 × 14.6 × 43.18 cm)
Bottom shelf (W × H × D):
44 × 8.25 × 18.75" (111.76 × 24.1 × 47.62 cm)
52 in. (132 cm)
19.75 in. (50.16 cm)
20.31 in. (51.58 cm)
18.63 in. (47.32 cm)
48 in. (121.92 cm)
Phillips screwdriver
Drill

SAFETY INFORMATION AND SPECIFICATIONS

CAUTION: The top surface of this stand
is designed for use with a product weighing no more than 100 lbs. (45.4 kg) and having a width
stand with no more than a one-inch overhang on each side of the shelf. Use with products that weigh more than the maximum weight allowed, or with dimensions that extend beyond the maximum width may result in instability, which may result in injury.
Model #: NS-C1205C
that permits it to sit evenly on the
CAUTION: This product contains small items that could be a choking hazard if swallowed.
Keep these items away from young children!
Tools needed:
2
www.insigniaproducts.com
52” OPEN FRAME TV STAND
A Front support (1) B Front base (1) C Back base (1)
D Left base (1) E Right base (1) F Rear support panel (1) G Top shelf (1)
H Pillar supports (2)
I Center shelf (1) J Bottom shelf (1)

PACKAGE CONTENTS: PARTS

www.insigniaproducts.com
3

PACKAGE CONTENTS: HARDWARE

Label Hardware Qty.
K6
L4
M12
N2
Foot
Medium screw
Short screw
Long screw
Label Hardware Qty.
O4
P2
Q1
Suction cup
Clamp screw
Allen wrench
Note: You may receive extra hardware. Make sure you have all the hardware necessary to
52” OPEN FRAME TV STAND
assemble your new TV stand:
4
1234in
10 20 30 40 50 60 70 80 90 1 00mm
www.insigniaproducts.com
52” OPEN FRAME TV STAND
M (12) Q (1)

ASSEMBLY INSTRUCTIONS

Step 1: Assemble the frame
1 Slide the bottom edges of the front support (A) into the openings on the left and right bases (D and E), then
secure the bases (D and E) to the front support (A) using three short screws (M) on each base (one screw on the inside edge of each base and two short screws on the bottom of each base).
2 Align the screw holes on the front base (B) with the screw holes on the front support (A), then secure the front
base (B) to the front support (A) using two short screws (M).
3 Align the screw holes on the back base (C) with the screw holes in the left and right bases (D and E), then secure
the back base (C) to the left and right bases (D and E) using two short screws (M) on each end of the back base (C).
You’ll need:
www.insigniaproducts.com
5
Loading...
+ 9 hidden pages