Insignia NS-C1140FMS User Manual
48” Black TV
Stand
NS-C1140FMS
USER GUIDE
SAFETY INFORMATION AND SPECIFICATIONS....2
PACKAGE CONTENTS: PARTS.....................................3
PACKAGE CONTENTS: HARDWARE..........................4
ASSEMBLY INSTRUCTIONS.........................................5
CARE AND MAINTENANCE...................................... 11
Before using your new product, please read these instructions to prevent any damage.
SAFETY INFORMATION AND SPECIFICATIONS
Maximum weight:
Top shelf: 300 lbs. (136 kg)
Middle shelf: 100 lbs. (45.4 kg)
Bottom shelf: 100 lbs. (45.4 kg)
Maximum width: 1-inch overhang on each side
of the top shelf
Overall dimensions (W × H × D):
48.25 × 22 × 22" (122.53 × 55.88 × 55.88 cm)
48.25" (122.55 cm)
19.5" (49.53 cm)
22" (55.88 cm)
48" (121.92 cm)
22" (55.88 cm)
Phillips screwdriver
Drill
CAUTION: The top surface of this stand
is designed for use with a product
weighing no more than
300 lbs. (136 kg) and having a width
that permits it to sit evenly on the
stand with no more than a one-inch overhang on
each side of the shelf. Use with products that weigh
more than the maximum weight allowed, or with
dimensions that extend beyond the maximum
width may result in instability, which may result in
injury.
CAUTION: This product contains small
items that could be a choking hazard if
swallowed.
Keep these items away from young
children!
Model #: NS-C1140FMS
48” BLACK TV STAND
Tools needed:
2
www.insigniaproducts.com
48” BLACK TV STAND
A Left support (1) B Right support (1) C Back support (1)
D Back base (1) E Front base (1) F Top shelf frame (1)
G Top shelf (1) H Center shelf (1) I Bottom shelf (1)
PACKAGE CONTENTS: PARTS
www.insigniaproducts.com
3
PACKAGE CONTENTS: HARDWARE
Label Hardware Qty.
J3
K6
L2
M2
N6
O6
Center shelf
support
Pin bolt
Long bolt
Bottom shelf
support
Bottom shelf
pad
Short bolt
An optional anti-tipping hardware kit is
included. Instructions on how to install the
hardware are included in the bag.
containing the kit.
Label Hardware Qty.
Q6
R1
S2
T12
U2
V1
Small screw
Top shelf
bracket
Large screw
Screw cap
Suction cup
Allen wrench
10 20 30 40 50 60 70 80 90 1 00mm
1234in
Note: You may receive extra hardware. Make sure you have all the hardware
48” BLACK TV STAND
necessary to assemble your new TV stand:
4
www.insigniaproducts.com
48” BLACK TV STAND
J (3)
Q (6)Phillips screwdriver
ASSEMBLY INSTRUCTIONS
Step 1: Attaching the shelf and back supports
• If necessary, loosen the clamp screws, then attach the shelf supports (J) to the left, right, and back supports (A, B,
and C) using six small screws (Q).
You’ll need:
www.insigniaproducts.com
5
Loading...