Congratulations on your purchase of a high-quality Insignia product. Your
NS-BRDVD4 or NS-BRDVD4-CA represents the state of the art in Blu-ray
Disc player design and is designed for reliable and trouble-free
performance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
www.insigniaproducts.com
3
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to aler t you to the presence of uninsulated
dangerous voltage within your player’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended
to alert you to the presence of important operating and
maintenance (servicing) instructions in the literature that came
with your player.
This symbol is the symbol for CLASS II (Double Insulation).
Warni ng
Your player employs a laser system.
Use of controls, adjustments, or the
performance of procedures other than those
specified may result in hazardous radiation
exposure.
Visible laser radiation is present when open and interlocks
defeated. Do not stare into the beam.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a
product, it means the product is covered by the European
Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and
human health.
4. For more detailed information about disposal of your old
appliance, please contact your city office, waste disposal service,
or the shop where you purchased the product.
4
www.insigniaproducts.com
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
Important safety instructions
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8 Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
15 To reduce the risk of fire or electric shock, do not expose this device to
rain, moisture, dripping, or splashing, and no objects filled with liquids,
such as vases, shall be placed on it.
16 An apparatus with a three-prong, grounding-type plug is a Class I
apparatus, which needs to be grounded to prevent possible electric
shock. Make sure that you connect this Class I device to a
grounding-type, three-prong outlet.
www.insigniaproducts.com
5
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
17 The wall plug is the disconnecting device. The plug must remain
readily operable.
18 Keep a minimum distance of 4 inches (10cm) around the apparatus for
sufficient ventilation.
19 Do not install this equipment in a confined space such as book case or
similar unit. The ventilation should not be impeded by covering the
ventilation openings with items such as newspaper, table-cloths, or
curtains.
20 Batteries should not be exposed to excessive heat such as sunshine,
fire, or the like.
Caution
Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type.
Features
•Full high-definition video playback at up to 1080p resolution for an
amazing viewing experience.
•Upconversion of standard definition DVDs for enhanced picture quality at
up to 1080p over an HDMI connection.
•Rich multi-channel surround sound.
•Easy and simple HDTV connection using a single HDMI cable (cable not
included).
•Multiple outputs for connecting your home theater system or amplifier.
•PIP functionality that lets you display primary and secondary video at the
same time (if available on the Blu-ray Disc).
•Pop-up menu display without interrupting playback (if available on the
Blu-ray Disc).
•HDMI 1080p/fps output (Blu-ray Disc only) that provides smooth playback
of video with a frame rate of 60 frames per second (TV must be connected
with an HDMI cable and be compatible with 1080p 60 frame).
Package contents
•Blu-ray Disc player
•Remote control
•AAA batteries (2)
•User Guide
6
www.insigniaproducts.com
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
Playable discs
Disc typeLogoDisc typeLogo
Blu-ray DiscCD-R
DVD-video
(DVD-ROM)
DVD-RWCD-RW
DVD+RWMP3
DVD-RJPEG
DVD+RMPEG4
Audio CDs (CDDA)
Notes
• Writeable DVD discs (DVD-RW or DVD-R) must be
finalized, VR-mode only.
• Playback may not work for some types of discs, or when
specific operations, such as angle change and aspect ratio
adjustment, are being performed. Information about the
discs is written in detail on the box.
• Do not allow the disc to become dirty or scratched.
Fingerprints, dirt, dust, scratches, or deposits of cigarette
smoke on the recording surface may make it impossible to
use the disc for playback.
• CD-R/-RW, DVD-RW/-R recorded with UDF or ISO9660
format can be played back.
• Windows Media Audio (WMA) files must be written to
the disc with a .wma file extension in order to be
recognized and played back correctly.
• JPEG picture files must be written to the disc with a .jpeg
or .jpg file extension in order to be recognized and played
back correctly.
About Blu-ray Discs
The massive storage capacity of a Blu-ray Disc allows a higher standard of
picture and audio quality and a wealth of special effects and enhanced
features not available on DVDs.
www.insigniaproducts.com
7
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
Java
Your player features Java support so you can get the most out of
the latest Blu-ray Discs. When a Blu-ray Disc loads, explore the title
menu to enjoy extra features such as interactive menus and
BD-Live.
HDMI
HDMI is the only domestic medium capable of transmitting the huge
volumes of data required by the high picture resolutions and advanced
digital audio codecs that make Blu-ray such an exciting medium.
Playing Blu-ray Discs
Playing Blu-ray Discs are a lot like playing DVDs, except Blu-ray Discs have
a higher level of interactivity.
Most of the standard features of DVD playback work the same with Blu-ray
Disc playback. The two most common exceptions are:
•Resume play—Not available on Blu-ray discs
•A-B repeat (playback loop)—Not available on some Blu-ray Discs
Color buttons
The red, green, yellow, and blue buttons on the remote control are used
with interactive menus when operating a Blu-ray Disc that includes
BD-Live applications. For more information about using this kind of disc,
see the instructions that came with the disc.
Front
8
# ItemDescription
1
Disc tray
2
(open/close)
3
Remote control sensor
4
(play/pause)
Insert a disc with th e label side up into this tray. To open or close the
tray, press (open/close).
Press to open or close the disc tray.
Receives signals from the remote control. Do not blo ck.
Press to start or pause playback.
www.insigniaproducts.com
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
# ItemDescription
Press to stop playback.
To resume playback, press or to select DVD/BD-ROM,
5
6
7
8
(stop)
(previous)
(next)
(standby/on)
then press ENTER. Depending on the disc, playback starts where it
stopped or at the beginning of the disc.
If you press (stop) twice, playback stops completely. To start
playback again, press (play/pause).
Press to go to the previous title, chapter, or track.
Press to go to the next title, chapter, or track.
Press to turn on your player or put your player in standby mode.
When your player is in standby mode, power is still entering your
player. To disconnect power, unplug the power cord.
Back
# ItemDescription
1
Power connector
2
USB port
3
ETHERNET jack
4
HDMI OUT
5
VIDEO OUT
6
COMPONENT VIDEO OUT
7
AUDIO OUT L/R
8
OPTICAL DIGITAL OUT
9
COAXIAL DIGITAL OUT
Plug the power cord into a power outlet.
Plug a USB flash drive into this port.
Connect an ethernet cable to this jack and to a broadband Internet
jack to access BD-Live information or run connected applications.
Connect a TV to th is jack using an HDMI cable. An HDMI cable c arries
both video and audio.
Connect a TV to this jack and to the AUDIO OUT L/R jacks using a
composite video cable (provided).
Connect a TV to these jacks and to the AUDIO OUT L/R jacks using a
component video cable and audio cable.
Connect the audio for a composite TV or component video TV to
these jacks.
Connect an optical home theater system to this jack to play the
sound through the home theater system’s speakers.
Connect a coaxial home theater system to this jack to play the sound
from the TV through the home theater system’s speakers.
www.insigniaproducts.com
9
Remote control
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
# ItemDescription
1
STANDBY/ON
2
Number buttons
3
SEARCH
4
(fast reverse)
10
Press to turn on your player or put your player in standby mode. When your
player is in standby mode, power is still entering your player. To disconnect
power, unplug the power cord.
In playback mode, press SEARCH, then press the number buttons to enter a
title, chapter, track, or time.
In menu mode, press to enter numbers.
Press to search for a title, chapter, or specific time on a disc. For more
information, see “Searching for a title, chapter, or elapsed time” on page 24.
Press to fast reverse. Each time you press this button, the fast-reverse speed
decreases from Fast x 2, Fast x 4, Fast x 8, Fastx 16, Fast x 32, Fast x 64,
Fast x 128. Press (play/pause) to resume normal playback.
www.insigniaproducts.com
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
# ItemDescription
Press to fast forward. Each time you press this button, the fast-forward speed
5
(fast forward)
6
ZOOM
7
(stop)
8
REPEAT
9
RESOLUTION
10
A-B
11
DISC MENU
12
13
ENTER
14
HOME/SETUP
15
SUBTITLE
A (red), B (green),
16
C (yellow), D (blue)
17
PIP
18
OPEN/CLOSE
19
CLEAR
20
(next)
21
(previous)
increases from Fast x 2, Fast x 4, Fast x 8, Fast x 16, Fast x 32, Fast x 64,
Fast x 128. Press (play/pause) to resume normal playback.
Press to zoom in on a video. Each time you press this button, the
magnification level changes. This button is only used for DVD discs or picture
files.
Press to stop playback.
To resume playback, press or to select DVD/BD-ROM, then
press ENTER. Depending on the disc, playback starts where it stopped or at
the beginning of the disc.
If you press (stop) twice, playback stops completely. To start playback
again, press (play/pause).
Press to repeat the current title, chapter, track, or repeat all. For more
information, see “Repeating a title, chapter, or CD track” on page 25.
Press to select the video resolution. For more information, see “Selecting the
video output resolution” on page 31.
Press to create a playback loop. For more information, see “Creating a
playback loop on a DVD or audio CD” on page 25.
During DVD playback, press to open the DVD root menu where you can select
DVD playback options. (This button is valid for DVDs that have a multi-layer
menu.)
If a disc menu opens when playing a Blu-ray Disc or DVD, press to select a
menu option.
During media file browsing, press to select a file on the popup menu.
When a menu is open, press to select an option, then press ENTER.
Press to confirm selection in a menu.
Press to stop disc playback and enter home screen.
When accessing connected applications such as Cinemanow, Pandora, or
Netflix, pressing HOME/SETUP will stop the application and return you to
home screen.
Press to select a subtitle language or to turn subtitles off.
When playing a Blu-ray Disc that has a Java™ application, press to control
playback. For more information, see the docu mentation that ca me with the
Blu-ray Disc.
Press to turn PIP (picture-in-picture) mode on or off. For more information,
see “Using PIP (picture-in-picture) mode” on page 25.
Press to open or close the disc tray.
Press to clear an input error.
Press to go to the next title, chapter, or track.
Press to go to the previous title, chapter, or track.
www.insigniaproducts.com
11
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
# ItemDescription
22
23
24
25
26
27
28
29
(step)
(play/pause)
ANGLE
DISPLAYPress to display disc information.
POPUP MENU/
TITLE MENU
RETURNPress to return to the previous menu.
AUDIO
SECONDARY AUDIO
Press to advance one frame at a time. Press (play/pause) to resume
normal playback.
Press to start or pause playback.
Press to select a viewing angle if multiple angles are available on the disc. For
more information, see “Selecting a viewing angle” on page 26.
During Blu-ray Disc playback, press to open a menu that lets you control
Blu-ray Disc playback.
During DVD playback, press to open the DVD menu (if available). For more
information, see “Using a disc popup menu” on page 26.
Press to select the audio mode. For more information, see “Selecting the
audio mode” on page 26.
In PIP mode, press to turn the audio for the secondary video on or off. For
more information, see “Using PIP (picture-in-picture) mode” on page 25.
Setting up your player
Installing remote control batteries
12
To install remote control batteries:
1 Remove the battery compartment cover.
www.insigniaproducts.com
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
2 Insert two AAA batteries into the battery compartment. Make sure
that the + and – symbols on the batteries match the + and – symbols
in the battery compartment.
3 Replace the battery compartment cover.
Notes
• Make sure that you insert the batteries correctly.
• Do not heat, open, or short-circuit batteries.
• Do not throw batteries into a fire.
• Do not mix different types of batteries or mix old and
new batteries.
• Do not try to recharge non-rechargable batteries.
• If the remote control does not function correctly or if the
operating range becomes reduced, replace the batteries.
www.insigniaproducts.com
13
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
Connecting a TV using an HDMI cable (best)
To connect a TV using an HDMI cable:
•Connect an HDMI cable to the HDMI jack on the back of your
player and to the HDMI IN jack on the TV.
TV
HDMI cable
Notes
Only the HDMI is capable of 1080p video output and the highest
definition audio codecs.
An HDMI cable carries both video and audio. If you want to use
TV speakers, you do not need to make an audio connection if you
are using an HDMI cable. If you want to use an HDMI-capable
audio receiver, connect an HDMI cable between your player and
the HDMI input on the receiver.
Connecting a TV using a component video cable (better)
Back of player
14
Notes
High definition video (up to 1080i) is supported with a
component video cable.
To connect a TV using component cables:
1 Connect a component video cable to the COMPONENT VIDEO OUT
jacks on the back of your player and to the COMPONENT VIDEO IN
jacks on the TV.
Audio cable
Back of player
TV
Component video cables
www.insigniaproducts.com
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
2 Connect an audio cable to the AUDIO OUT L/R jacks on the back of
your player and to the AUDIO IN L/R jacks on the TV.
Connecting a TV using an A/V cable (good)
To connect a TV using an AV cable:
•Connect an A/V cable to the VIDEO OUT and AUDIO OUT L/R
jacks on the back of your player and to the VIDEO IN and
AUDIO IN L/R jack on the TV. Jacks and cable connectors are
usually color-coded. Make sure that you match the colors.
TV
Yellow=Video
White=Left audio
Red=Right audio
Note
The A/V cable can only send standard-definition video (480i) to
your TV.
Back of player
Connecting audio to an amplifier or home theater system
To connect audio to an analog amplifier:
•Connect an audio cable to the AUDIO OUT L/R jacks on the
back of your player and to the AUDIO IN L/R jacks on the
receiver.
Back of player
Analog audio receiver
Audio cable
To connect audio to a digital amplifier or home theater system:
•Connect a digital optical cable from the OPTICAL DIGITAL OUT
jack on the back of your player to the OPTICAL DIGITAL IN jack
on the receiver.
- Or -
www.insigniaproducts.com
15
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
Connect a digital coaxial cable from the COAXIAL DIGITAL OUT
jack on the back of your player to the COAXIAL DIGITAL IN jack
on the receiver.
Home theater system
Back of player
Connect to the COAXIAL DIGITAL OUT jack
Connecting to the Internet
To connect to the Internet:
•Connect a network cable to the INTERNET jack on the back of
your player and into a wired router.
Back of player
Using your player
Playing a Blu-ray Disc or DVD
Connect to the
OPTICAL DIGITAL
OUT jack
Network cable
Note
Unless otherwise noted, all tasks in this section are based on
using the remo te control.
16
To play a Blu-ray Disc or DVD:
1 Press .
2 Turn on the TV, then select the input setting on the TV that matches
the connection method you used to connect your player.
3 Press to open the disc tray.
4 Place a disc on the disc tray with the label facing up, then press to
close the disc tray. It may take a few seconds for the disc to load.
5 If a Blu-ray Disc or DVD menu opens, press or to select PLAY,
then press ENTER.
6 To eject the disc, press .
www.insigniaproducts.com
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
Controlling Blu-ray Disc or DVD playback
Note
If appears on the screen, the current action is not permitted
by the disc or your player. For example, many discs do not let you
fast-forward through the warning information at the beginning
of the disc.
To control Blu-ray Disc or DVD playback:
•Press (play/pause) to start or pause playback. The sound is
muted when your player is in pause mode. To resume normal
playback, press (play/pause).
•Press (stop) to stop playback, press (play/pause) to start
playback again. Depending on the disc, playback starts where it
stopped or at the beginning of the disc. If you press (stop)
twice, playback stops completely and will start at the beginning
of the disc when you resume playback.
•Press to fast-forward. Each time you press this button, the
fast-forward speed changes in the following sequence: Fast x 2,
x4, x8, x16, x32, x64, x128. Press (play/pause) to
resume normal playback.
•Press to fast-reverse. Each time you press this button, the
fast-reverse speed changes in the following sequence: Fast x 2,
x4,x8, x16, x32, x64, x128. Press (play/pause) to resume
normal playback.
•Press to go to the previous chapter within two seconds after
the current chapter starts. To go to the beginning of the
chapter, press any time after the first two seconds of the
chapter is played.
•Press to go to the next chapter.
•Press (step) to play one frame at a time. Each time you press
this button, the video advances one frame. Press (play/
pause) to resume normal playback.
Using connected applications for the US market
Notes
The instructions and support numbers for the connected
applications apply to the US market only.
The player is equipped with the capability to watch movies over
the Internet (for example, from Netflix or CinemaNow), or to
listen to Pandora Internet radio. Before being able to use these
Internet services, you must first:
1. Have connected the player to the Internet, and passed the
Network Test. See “Configuring the Internet connection” on
page 46.
2. Have a valid account to these services.
You should contact the partner company (not Insignia) if you
experience an issue using one of these applications.
www.insigniaproducts.com
17
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
Watching movies with CinemaNow
To set up your CinemaNow account:
1 First set up your CinemaNow account through your PC. Go to
www.cinemanow.com/activate to get an activation PIN.
2 Log in to CinemaNow with your account information and password.
3 Browse to Activate/Deactivate under the My Account section.
4 Click Activate a New Device and sign in again with your user name/
password.
5 Enter any name in the Name Your Device section, then click
Continue.
6 You now have been provided with a valid activation number to enter
into the activation field within the Cinemanow application on your
Blu-ray player.
7 Once you have successfully established an internet connection on
your Blu-ray player, select the Cinemanow application using your
remote control, then press ENTER.
8 Select the Settings tab at the bottom of the screen, then press ENTER.
9 Select Activate and enter your activation code. You can now rent
movies using Cinemanow.
10 To exit CinemaNow, press Home/Setup.
Watching movies with Netflix
Once the conditions above have been met, follow the steps below to
register your player with Netflix, which enables it to stream movies from
the Internet to your TV.
To watch movies with Netflix:
1 Select Netflix to register the player with your Netflix account. Follow
the directions on the screen. You will be provided with an activation
code.
2 If you already have an existing Netflix account, log in to your account
on your PC. Click on the You r A cc o unt & H el p link in the upper right
corner of the screen.
3 In the WATCHING INSTANTLY ON YOUR TV OR COMPUTER section,
click Activate a Netflix Ready Device and enter the activation code
from Step 1.
- OR -
18
www.insigniaproducts.com
Note
Users must have a valid Netflix account in order to stream Netflix
movies to this player.
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
If you do not have an existing Netflix account, go to http://
www.netflix.com/insignia to start your free trial and enter the
activation code from Step 1 into the Insignia code field on screen.
4 After setting up your account and activating your Blu-ray player,
browse to Instant under the You r Que ue tab and add movies to your
queue.
5 To exit Netflix, press Home/Setup.
Listening to music with Pandora
For existing Pandora customers:
1 Select Pandora.
2 Select I have a Pandora account from the options, then sign in with
your account information.
For new Pandora customers:
1 Select Pandora.
2 Select I am new to Pandora from the options. You will receive an
activation code.
3 On your PC, go to www.pandora.com/insignia and enter the activation
code from Step 2, then click Activate.
4 Click Create a Pandora Account and follow the on-screen
instructions.
5 To exit Pandora, press Home/Setup.
To create a new Pandora account using a PC:
•Go to http://www.pandora.com/ to create a new account.
Using connected applications for the Canadian market
To stay up-to-date on future service options, visit
www.insigniaproducts.com.
Using BD-Live
Some BD discs contain additional features that are made available to
players that are connected to the Internet and have additional USB
memory sticksadded.
These additional features may include things like:
•The ability to download new movie trailers.
•Additional commentary by actors and directors.
•Multiperson game play and chat.
www.insigniaproducts.com
19
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
In order to access BD-Live functions, the player must be properly
configured for BD-Live Internet access and it must be equipped with
additional USB memory sticks.
Setting up your player for BD-Live Internet access
To set your player up for BD-Live Internet Access:
1 Press ENTER. The Settings menu opens.
2 Press or to select BD-Live. The BD-Live menu opens.
3 Press , press or to select BD-Live Internet Access, then press
ENTER. Make sure that either Limit Access or Always Allow Access is
checked.
4 Insert a USB memory stick. The USB stick must be at least 1 GB and be
formatted as FAT32.
5 If there is not at least 1 GB of free space on your player, try to select
Clear BD Storage from the BD-Live menu.
6 Press to go to the previous menu.
7 Press or to select Network, then press ENTER.
8 Configure your Internet connection as described in “Configuring the
Internet connection” on page 46.
Note
Your player must pass the network test (see “Using the network
test” on page 47) or you are not connected to the Internet and
cannot access BD-Live content on the web.
Displaying Blu-ray Disc or DVD information
Note
The information displayed for discs other than Blu-ray Discs will
be different.
20
www.insigniaproducts.com
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
To display Blu-ray Disc or DVD information:
•Press DISPLAY. Your player displays information about the Disc,
such as type of disc, current elapsed time in title, total amount
of time in title, current chapter, and total number of chapters.
•Press DISPLAY again to close the display.
Playing files on a data disc or USB memory stick
When you insert a data disc or USB memory stick containing picture,
music, or video files into your player, icons are added to the menu to
indicate that video, music, or picture files are available for playback.
Videos
Settings
Music
Pictures
www.insigniaproducts.com
21
Viewing photographs
Your player can display digital photograph files that are on a USB memory
stick or that have been burned onto a CD, DVD+/-R, DVD+/-R/(W), or
Blu-ray Disc.
To view photographs:
1 Insert a disc or a USB memory stick containing photographs into your
Blu-ray player. The following menu opens:
Videos
Settings
Music
Pictures
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
22
2 Press or to select Pictures, then press ENTER. The Picture menu
opens.
3 Select one of the following options:
•Select Start Slide Show to view the pictures in the current
folder one by one.
•Select Settings to set the slide show effect and slide show
delay time.
•Select Previous folder/Media menu to get back to the
previous folder.
www.insigniaproducts.com
Loading...
+ 51 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.