The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert you to the presence of uninsulated
dangerous voltage within your player’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended
to alert you to the presence of important operating and
maintenance (servicing) instructions in the literature that came
with your player.
This symbol is the symbol for CLASS II (Double Insulation).
Warning
Your player employs a laser system.
Use of controls, adjustments, or the
performance of procedures other
than those specified may result in
hazardous radiation exposure.
Visible laser radiation is present when open and
interlocks defeated. Do not stare into the beam.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a
product, it means the product is covered by the European
Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will help prevent
potential negative consequences for the environme nt and
human health.
4. For more detailed information about disposal of your old
appliance, please contact your city office, waste disposal service
or the shop where you purchased the product.
Important safety
instructions
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9 Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is used,
use caution when moving the
cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
15 To reduce the risk of fire or electric shock, do not
expose this device to rain, moisture, dripping, or
splashing, and no objects filled with liquids,
such as vases, shall be placed on it.
16 An apparatus with a three-prong,
grounding-type plug is a Class I apparatus,
which needs to be grounded to prevent
possible electric shock. Make sure that you
connect this Class I device to a grounding-type,
three-prong outlet.
17 The wall plug is the disconnecting device. The
plug must remain readily operable.
18 Keep a minimum distance of 4 inches (10cm)
around the apparatus for sufficient ventilation.
19 Do not install this equipment in a confined
space such as book case or similar unit. The
ventilation should not be impeded by covering
the ventilation openings with items such as
newspaper, table-cloths, or curtains.
20 Batteries should not be exposed to excessive
heat such as sunshine, fire, or the like.
Caution
Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type.
www.insigniaproducts.com
1
Blu-Ray Disc Player
NS-BRDVD3-CA Blu-Ray Disc Player
Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your NS-BRDVD3-CA represents
the state of the art in Blu-ray Disc player design and
is designed for reliable and trouble-free
performance.
Features
• Full high-definition video playback at up to 1080p
resolution for an amazing viewing experience.
• Upconversion of standard definition DVDs for
enhanced picture quality at up to 1080p over an
HDMI connection.
•Deep color
• Rich multi-channel surround sound.
• Easy and simple HDTV connection using a single
HDMI cable (cable not included).
• Multiple outputs for connecting your home
theater system or amplifier.
• PIP functionality that lets you display primary and
secondary video at the same time (if available on
the Blu-ray Disc).
• Pop-up menu display without interrupting
playback (if available on the Blu-ray Disc).
• HDMI 1080p output that provides smooth
playback of video with a frame rate of 60 frames
per second (TV must be connected with an HDMI
cable and be compatible with 1080p 60 frame).
# ItemDescription
5
VFD screen
6
(play/pause)
7
(stop)
8
(previous)
9
(next)
10
Remote control sensor
11
USB port
Displays status information.
Press to start or pause playback.
Press to stop playback. The Setup menu is displayed.
To resume playback, press or to select
DVD/BD- ROM, then press ENTER. Depending on the
disc, playback starts where it stopped or at the
beginning of the disc.
If you press (stop) twice, playback stops
completely. To start playback again, press
(play/pause).
Press to go to the previous title, chapter, or track.
Press to go to the next title, chapter, or track.
Receives signals from the remote control. Do not block.
Connect a USB flash drive to this port.
Back
4
VIDEO OUT AUDIOOUT
E
R
E
T
T
K
N
I
VIDEO L R
Blu-ray
DVD-Video
RISK OF EL EC TR IC SH OCK
DO NOT OPEN
RISQUE CHOC ELECTRIQUE NE
Y
PAS OUVRIR
COMPONENT VIDEO OUT
1
2
CB / PB CR / PR
3
CONFORMS TO
UL
STD. 60065
CM
CERTIFIED TO
CSA
STD. C22.2
N
o. 60065
U
C
S
3181372
ETHERNET
HDMI
5
6
Manufactured under license
from Dolby Laboratories. Do-
lby and the double-D symbol
are trademarks of Dolby
Laboratories.
Manufactured:
MODEL: NS-BRDVD3
Manufactured for I nsi gnia Pr oducts
7601 Penn Ave S. Ric hfie ld, M N 55423 U SA
S/N:
BLU-RAY DISC PLAYER
AC: 110V-120V~ 50/60Hz
POWER: 25W
MADE IN CHINA
Manufactured under l icens e under
U.S. Patent #'s: 5,451, 942; 5,956, 674;
5,974,380; 5,978,762; 6,487,5 35 &
COAXIAL
other U.S. and worl dwide pate nts
issued & pending. DTS is a regist-
ered trademark & the DTS logos
and Symbol are trademarks of DTS,
OPTICAL
Inc. 1996-2008 DTS , I nc. Al l Ri ghts
Reserved.
DIGITAL OUT
8
7
CLASS 1 LASER PRODUCT
This device complies with part 15 of
the FCC rules. Operati on is s ubjec t
to the following two conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any inter ference received, including inter ference that ma y ca use undes ired
operation.
U.S. Patent N os. 6,836,549; 6,381, 747;
7,050,698; 6,516,132; and 5, 583,936.
This device complies with 21 CFR chapter 1,
subchapter J. Applicable at the date of
manufac tu r e .
This Class B digital apparatus complies with
Canadian ICES-003. Cet appareil numrique
de la classe B est conforme la norme
NMB-003 du Cana da.
Package contents
• Blu-ray Disc player
•A/V cable
• Remote control
• AAA batteries (2)
•User Guide
Front
2
1
3
# ItemDescription
1
(standby/on)
2
Power indic ator
3
Disc tray
4
(open/close)
4
Press to turn on your player or put your player in
standby mode. When your player is in standby mode,
power is stil l entering your player. To disconne ct
power, unplug the power cord.
Lights blue when your player is turned off (standby
mode).
Turned off when your player is turned on.
Insert a disc with the label side up into this tray. To
open or close the tray, press (open/close).
Press to open or close the disc tray.
# ItemDescription
1
Power connector
2
VIDEO OUT
3
COMPONENT VIDEO OUT
4
AUDIO OUT L/R
5
HDMI
6
5
6
9
7
10
11
ETHERNET
8
7
OPTICAL DIGITAL OUT
8
COAXIAL DIGITAL OUT
Plug the power cord into a power outlet.
Connect a TV to this jack and to the AUDIO OUT L/R
jacks using a composite video cable (provided).
Connect a TV to these jacks and to the AUDIO OUT L/R
jacks using a component video cable and audio cable.
Connect the audio for a composite TV or component
video TV to these jacks.
Connect a TV to this jack using an HDMI cable. An
HDMI cable carries both video and audio. You do not
need to make an audio connection.
Connect an ethernet cable to this jack and to a
broadband Internet jack to download BD-Live
informatio n.
Connect an optical digital amplifier to this jack to play
the sound from the TV through the amplifier’s
speakers.
Connect an coaxial digital amplifier to this jack to play
the sound from the TV through the amplifier’s
speakers.
2
www.insigniaproducts.com
Blu-Ray Disc Player
Remote control
# ItemDescription
Press to turn on your player or put your player in
1
STANDBY/ON
2
Number buttons
3
SEARCH
4
5
6
ZOOM
(fast reverse)
(fast forward)
standby mode. When your player is in standby mode,
power is stil l entering your player. To disconne ct
power, unplug the power cord.
In playback mode, press SEARCH, then press the
number buttons to enter a title, chapter, track, or time.
In menu mode, press to enter the parental code
password.
Press to search for a title, chapter, or specific time on a
disc. For more information, see “Searching for a title,
chapter, or elapsed time” on page 9.
Press to fast reverse. Each time you press this button,
the fast-reverse speed decreases from Fast x 2,
Fast x 4 , Fast x 8, Fas t x 16 , Fast x 3 2, Fas t x 64,
Fast x 128. Press (play/pause) to resume normal
playbac k.
Press to fast forward. Each time you press this button,
the fast-forward speed increases from Fast x 2,
Fast x 4 , Fast x 8, Fas t x 16 , Fast x 3 2, Fas t x 64,
Fast x 128. Press (play/pause) to resume normal
playbac k.
Press to zoom in on a video. Each time you press this
button, the magnification level changes. This button is
only used for DVD discs.
# ItemDescription
Press to stop playback. The Setup menu is displayed.
To resume playback, press or to select
DVD/BD- ROM, then press ENTER. Depending on the
7
(stop)
8
REPEAT
9
RESOLUTION
10
A-B
11
DISC MENU
12
13
ENTER
14
SETUP
15
SUBTITLE
A (red), B (green),
16
C (yellow), D (blue)
17
PIP
18
OPEN/CLOSE
19
CLEAR
20
(next)
21
(previous)
22
23
24
25
26
27
28
29
(step)
(play/pause)
ANGLE
DISPLAYPress to display disc information.
POPUP MENU/
TITLE MENU
RETURNPress to return to the previous menu.
AUDIO
SECONDARY AUDIO
disc, playback starts where it stopped or at the
beginning of the disc.
If you press (stop) twice, playback stops
completely. To start playback again, press
(play/pause).
Press to repeat the current title, chapter, track, or
repeat all. For more information, see “Repeating a
title, chapter, or CD track” on page 9.
Press to select the video resolution. For more
information, see “Selecting the video output
resolution” on page 12.
Press to create a playback loop. For more information,
see “Creating a playback loop on a DVD or audio CD”
on page 9.
During DVD playback, press to open the DVD root
menu where you can select DVD playback options.
(This button is valid for DVDs that have a multi-layer
menu.)
If a disc menu opens when playing a Blu-ray Disc or
DVD, press to select a menu option, then press ENTER.
During media file browsing, press to select a file on the
popup menu, then press ENTER.
When a menu is open, press to select an option, then
press ENTER.
Press to confirm selection in a menu.
Press to open the setup menu where you can adjust
options.
Press to select a subtitle language or to turn subtitles
off.
When playing a Blu-ray Disc that has a Java™
application, press to control playback. For more
information, see the documentation that came with
the Blu-ray Disc.
Press to turn PIP (picture-in-picture) mode on or off.
For more information, see “Using PIP
(picture-in-picture) mode” on page 10.
Press to open or close the disc tray.
Press to clear an input error.
Press to go to the next title, chapter, or track.
Press to go to the previous title, chapter, or track.
Press to advance one frame at a time. Press
(play/pause) to resume normal playback.
Press to start or pause playback.
Press to select a viewing angle if multiple angles are
available on the disc. For more information, see
“Selecting a viewing angle” on page 10.
During Blu-ray Disc playback, press to open a menu
that lets you control Blu-ray Disc playback.
During DVD playback, press to open the DVD menu (if
available). For more information, see “Using a disc
popup menu” on page 10.
Press to select the audio mode. For more information,
see “Selecting the audio mode” on page 10.
In PIP mode, press to turn the audio for the secondary
video on or off. For more information , see “Using PIP
(picture-in-picture) mode” on page 10.
www.insigniaproducts.com
3
NS-BRDVD3-CA Blu-Ray Disc Player
Setting up your player
Installing remote control batteries
To install remote control batteries:
1 Remove the battery compartment cover.
2 Insert two AAA batteries into the battery
compartment. Make sure that the + and –
symbols on the batteries match the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.
Connecting a TV using an HDMI cable (best)
To connect a TV using an HDMI cable:
• Connect an HDMI cable to the HDMI jack on
the back of your player and to the HDMI IN
jack on the TV.
TV
Back of player
Notes
• Only the HDMI is capable of 1080p video output
and the highest definition audio codecs.
• An HDMI cable carries both video and audio. If
you want to use TV speakers, you do not need to
make an audio connection if you are using an
HDMI cable. If you want to use an HDMI-capable
audio receiver, connect an HDMI cable between
your player and the HDMI input on the receiver.
Notes
• Make sure that you insert the batteries correctly.
• Do not heat, open, or short-circuit batteries.
• Do not throw batteries into a fire.
• Do not mix different types of batteries or mix
old and new batteries.
• Do not try to recharge non-rechargable
batteries.
• If the remote control does not function correctly
or if the operating range becomes reduced,
replace the batteries.
4
www.insigniaproducts.com
Blu-Ray Disc Player
Connecting a TV using a component video
cable (better)
Notes
• The following task shows connecting the audio
to a receiver. If you want to use the TV speakers
instead of a receiver, connect the audio cable to
the TV’s audio in jacks on the TV.
• High definition video (up to 1080i) is supported
with a component video cable.
Using a digital audio receiver
To connect a component-capable TV to a digital
audio receiver:
1 Connect a component video cable to the
COMPONENT VIDEO OUT jacks on the back of
your player and to the COMPONENT VIDEO IN
jacks on the TV.
Digital audio receiver
Connect the OPTICAL DIGITAL OUT jack
OR
Back of player
COAXIAL DIGITAL OU T jack
Using an analog audio receiver
To connect a component-capable TV to an
analog audio receiver:
1 Connect a component video cable to the
COMPONENT VIDEO OUT jacks on the back of
your player and to the COMPONENT VIDEO IN
jacks on the TV.
Analog audio receiver
Audio cable
Back of player
Component video cable
TV
2 Connect a digital optical cable from the
OPTICAL DIGITAL OUT jack on the back of your
player to the OPTICAL DIGITAL IN jack on the
receiver.
Or
Connect a digital coaxial cable from the
COAXIAL DIGITAL OUT jack on the back of your
player to the COAXIAL DIGITAL IN jack on the
receiver.
Component video cable
TV
2 Connect an audio cable to the AUDIO OUT L/R
jacks on the back of your player and to the
AUDIO IN L/R jacks on the receiver.
www.insigniaproducts.com
5
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.