How it Works
Insignia
Loading...
NS-BK1TSS6
User Manual
28 pgs3.18 Mb0
Table of contents
Loading...

Insignia NS-BK1TSS6, NS-BK2TSS6 User Manual

Download
Single- and Dual-Tap Kegerator/Beverage Cooler
NS-BK1TSS6/NS-BK2TSS6
USER GUIDE
Before using your new product, please read these instructions to prevent any damage.
Insignia Single- and Dual-Tap

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Locating your kegerator/beverage cooler . . . . . . . . . . . . . . . . . . . . . . . . .9
Assembling your kegerator/beverage cooler . . . . . . . . . . . . . . . . . . . . .11
Using your kegerator/beverage cooler . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Maintaining your kegerator/beverage cooler. . . . . . . . . . . . . . . . . . . . .20
Replacing kegs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Replacing the CO2 tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Storing your kegerator/beverage cooler . . . . . . . . . . . . . . . . . . . . . . . . .22
Moving your kegerator/beverage cooler . . . . . . . . . . . . . . . . . . . . . . . . .22
Converting your beer dispenser to a beverage refrigerator . . . . . . .22
Troubleshooting - beer quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Troubleshooting - cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
ONE-YEAR LIMITED WARRANTY - INSIGNIA . . . . . . . . . . . . . . . . . . . . . . .26
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
Kegerator/Beverage Cooler
Grounding requirement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Single-tap model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Dual-tap model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Before using your kegerator/beverage cooler . . . . . . . . . . . . . . . .9
Finding a suitable location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Providing a proper power supply . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Installing the casters (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Attaching the guard rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Installing the draft arm assembly . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Installing the CO2 regulator and tank . . . . . . . . . . . . . . . . . . . . . . .13
Attach the CO2 tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Installing and setting up a beer keg . . . . . . . . . . . . . . . . . . . . . . . .17
Setting the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Automatic defrosting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
2
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler

Introduction

Congratulations on your purchase of a high-quality Insignia product. Your NS-BK1TSS6 or NS-BK2TSS6 represents the state of the art in kegerator/beverage cooler design and is designed for reliable and trouble-free performance.

Important Safety Instructions

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your kegerator/beverage cooler.
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your kegerator/beverage cooler.

WARNING

1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this appliance near water. 6 Clean only with damp cloth. 7 Do not block any ventilation openings. Install in accordance with the
8 Do not install near any heat sources such as radiators, heat registers,
9 Do not defeat the safety purpose of the polarized or grounding-type
manufacturer's instructions.
stoves, or other apparatus (including amplifiers) that produce heat.
plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
3
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
10 Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from the appliance.
11 Do not attempt to modify or extend the power cord of this appliance. 12 Unplug this appliance during lightning storms or when it will not be
used for long periods of time.
13 Make sure that the available AC power matches the voltage
requirements of this appliance.
14 Do not handle the plug with wet hands. This could result in an electric
shock.
15 Unplug the power cord by holding the plug, never by pulling the cord. 16 Do not turn the appliance on or off by plugging or unplugging the
power cord.
17 Turn off the appliance before unplugging it. 18 Refer all servicing to qualified service personnel. Servicing is required
when the appliance has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the appliance, the appliance has been exposed to rain or moisture, does not operate normally, or has been dropped.
19 To reduce the risk of fire or electric shock, do not expose this appliance
to rain, moisture, dripping, or splashing, and no objects filled with liquids should be placed on top of it.

WARNING

Electric Shock Hazard
Failure to follow these instructions can result in electric shock, fire, or death.
1 WAR NIN G–Keep ventilation openings in the
kegerator/beverage cooler clear of obstruction.
2 WAR NIN G–Do not damage the refrigerant tubing
when handling, moving, or using the kegerator/beverage cooler.
3 WAR NIN G–Do not use electrical appliances inside the storage
compartment of the kegerator/beverage cooler, unless they are of the type recommended by the manufacturer.
4 WAR NIN G–DANGER—Never allow children to play with, operate, or
crawl inside the kegerator/beverage cooler. Risk of child entrapment. Before you throw away your old
kegerator/beverage cooler:
1) Take off the doors
4
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
2) Leave the shelves in place so that children may not easily climb inside
5 Unplug the kegerator/beverage cooler before performing user
maintenance on it.
6 This kegerator/beverage cooler can be used by children age 8 years
and older and persons with reduced physical or mental capabilities or lack of experience and knowledge if they are given supervision or instruction concerning the use of the kegerator/beverage cooler in a safe way and understand the hazards involved. Children should not play with the kegerator/beverage cooler. Cleaning and maintenance should not be performed by children without supervision.
7 If a component part is damaged, it must be replaced by the
manufacturer, its service agent, or similar qualified persons in order to avoid a hazard.
8 Follow local regulations regarding disposal of the kegerator/beverage
cooler due to flammable refrigerant and gas. All refrigeration products contain refrigerants, which under the guidelines of federal law must be removed before disposal. It is the consumer's responsibility to comply with federal and local regulations when disposing of this product.
9 This kegerator/beverage cooler is intended to be used in household
and similar environments.
10 Do not store or use gasoline or any flammable liquids inside or in the
vicinity of this kegerator/beverage cooler.
11 Do not use an extension cord with this kegerator/beverage cooler. If
the power cord is too short, have a qualified electrician install an outlet near the kegerator/beverage cooler. Use of an extension cord can negatively affect the kegerator/beverage cooler’s performance.

Grounding requirement

This kegerator/beverage cooler must be grounded. This kegerator/beverage cooler is equipped with a cord having a grounding wire with a grounding plug. The plug must be inserted into an outlet that is properly installed and grounded.
Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or service person if the grounding instructions are not completely understood, or if doubt exists as to whether the kegerator/beverage cooler is properly grounded.
5
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
Metal washers (2) for locking caster wheels
Drip tray (2 pieces)
Locking ca sters (2)
Casters ( 2)
Wire s helf
Guardrail
Wire half-shelf
Metal wrench (for cleaning)
CO2 regulator
CO2 tank (shipped empty)
Notes:
• See your local beer keg provider, air/gas or welding supplier, or sporting goods store to fill your CO2 tank.
•Your CO
2
tank must be empty to
return your kegerator.
CO
2
gas line (1 -
single-tap model)
Hose clamps (2 with single-tap model, 4 with dual-tap model)
Bolt and nut for tank retainer
CO
2
tank retainer
(comes installed)
T-c onn ec tor (dual-tap model only)
CO2 gas lines (3 - dual-tap model)
CO2 back tank retainer (for optional tank mount on the back.)

Features

• 5.6 cu. ft.
• Dual taps for multiple kegs (dual-tap model only)
• Convertible to refrigerator/beverage cooler
• Stainless steel door
• Adjustable thermostat for ideal temperature
• Holds one 1/2 keg (pony keg) or 1/4 keg slim
•White wire shelves (2)
•Caster wheels (4)

Package contents

Cabinet parts

CO2 parts

6
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
Single draft arm assembly (single-tap model only)
Dual draft arm assembly (dual-tap model only)
Single-tap beer gasket
Keg coupler (D- type) (2 included with dual-tap model)
Dual-tap beer gasket with screws (4)
Beer tap handle (one for single-tap, two for dual tap.
Extra valve washers (one each for single-tap model and two each for dual-tap model)

Keg parts

You’ll need

• Adjustable Wrench
• Phillips head screwdriver
•Standard (flat blade) screwdriver
• Pair of pliers/clamp crimper
• Full keg of beer (1/2 barrel size or smaller)
Fill the included CO welding supplier, or sporting goods store to fill your CO2 tank.)
tank with CO2 (See your local beer keg provider, air/gas or
2
Note
Any Coors brand or Miller rubber sided kegs do not fit inside.
7

Single-tap model

Work top
Draft arm assembly
Guardrail
CO2 tank
CO
2
tank retainer
Locking casters
Beer keg
CO
2
tank regulator
Drip tray
Thermostat (on the back of the unit)
Keg coupler
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
8
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
Work top
Draft arm assembly
Guardrail
CO
2
tank
CO
2
tank retainer
Locking casters
Beer keg
CO
2
tank regulator
Drip tray
Thermostat (on the back of the unit)
Keg couplers

Dual-tap model

Locating your kegerator/beverage cooler

Before using your kegerator/beverage cooler

• Let the kegerator/beverage cooler stand upright for approximately eight hours before connecting it to power. This reduces the possibility of a malfunction in the cooling system from improper handling during transportation.
• Check to make sure that all accessories listed/shown are included with your kegerator/beverage cooler. If any accessories or parts are missing or not in good condition, contact customer service for assistance.
• Clean the interior surface with lukewarm water using a soft cloth.
9
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
3-prong receptacle
Receptacle box cover
3-prong plug
Grounding lead
Grounding adapter Receptacle box cover
Screw Receptacle
Using a 3-prong plug and outlet Using a grounding adapter

Finding a suitable location

• This kegerator/beverage cooler is designed to be free standing only, and should not be recessed or built-in.
• Place your kegerator/beverage cooler on a floor that is strong enough to support the kegerator/beverage cooler when it is fully loaded.
• Allow three inches of space between the back and sides of the kegerator/beverage cooler and any surrounding walls. This allows for proper air ventilation. If you install the casters, lock them. If not, adjust the leveling feet to keep the kegerator/beverage cooler level.
• Locate the kegerator/beverage cooler away from direct sunlight and sources of heat (stove, heater, radiator, and so on). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Ambient temperature below 50°F (10°C) or above 85°F (29.4°C) will hinder the performance of this kegerator/beverage cooler. This kegerator/beverage cooler is not designed for use in a garage or any other outside installation.
• Avoid locating the kegerator/beverage cooler in moist areas.

Providing a proper power supply

Check your local power source. This kegerator/beverage cooler requires a 110V-120V, 60 Hz power supply.
Use a receptacle that accepts the grounding prong. The power cord is equipped with a 3-prong (grounding) plug that mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this kegerator/beverage cooler.
10
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
Casters
Locking casters
Notes
• The kegerator/beverage cooler should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.
• We strongly recommend that you do not use an extension cord. However, if you must use an extension cord, it is absolutely essential that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.
• Never unplug your kegerator/beverage cooler by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet.

Assembling your kegerator/beverage cooler

Installing the casters (optional)

1 Remove all contents of the kegerator/beverage cooler and tip it onto
its back.
2 Attach the two metal washers (included) to the locking casters to
prevent scratching the cabinet, then install the two locking casters in the front positions on the bottom of the kegerator/beverage cooler. You will have to puncture the white plastic.
3 Install the other two casters in the rear positions on the bottom of the
kegerator/beverage cooler.
4 Unscrew and remove the black front feet. Keep them in a safe place in
case you want to remove the casters and use the front feet.
5 With all four casters tightened evenly, stand the unit in the upright
position.
11
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
6 Step on the front of the locking casters to lock the kegerator/beverage
cooler into place or step on the back to unlock the kegerator/beverage cooler.

Attaching the guard rail

• Insert the guard rail into the holes on the top of the kegerator/beverage cooler.

Installing the draft arm assembly

1 Remove the round cabinet plug from the top of the
kegerator/beverage cooler. You may need to push the cabinet plug up from the inside. Store the plug in a safe place because you will need it to convert the beer dispenser into a beverage cooler.

Single-tap model:

a Place the single-tap beer tap gasket over the opening, aligning the
shapes with the shapes in the gasket.
b Pass both the wing nut and the beer tube (attached to the draft
arm assembly) through the opening until the draft arm assembly is resting on the top of the cabinet.
c Rotate the draft arm 60 degrees until the tap is facing the front. It
may take some force.
d Continue to step 2 on the next page.

Dual-tap model:

a Place the dual-tap beer tap gasket over the opening, aligning the
b Pass both the wing nuts and the beer tubes (attached to the draft
c Align the holes in the draft arm with the holes in the gasket.
12
four holes with the holes on the top of the cabinet.
arm assembly) through the opening until the draft arm assembly is resting on the top of the cabinet.
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
Beer tap handle
Draft arm assembly
Beer tube
Wing nut
Silver snug ring
d Attach the draft arm to the worktop with the four screws provided.
2 Attach the black plastic beer tap handle to the top of the faucet,
tightening it by hand until it's tight. Hold the silver snug ring so it does not move.
Note
If there is a small drip after you pour a beverage, you may have tightened the beer tap handle too much. If so, unscrew the silver snug ring one turn, then retighten the beer tap handle.

Installing the CO2 regulator and tank

Before installing the CO2 regulator and tank, it’s very important that you review this list of safety tips.
WAR NIN G: CO compressed gas which can be hazardous if not handled properly. Make
gas can be dangerous. CO2 tanks contain high-pressure,
2
sure that you READ and UNDERSTAND the following procedures for CO tanks BEFORE INSTALLATION.
1. ALWAYS connect the CO result in explosion with possible death or injury when the tank valve is opened.
2. NEVER connect the CO
tank to a regulator. Failure to do so could
2
tank directly to the beer keg.
2
3. ALWAYS follow correct procedures when tanks are changed.
4. ALWAYS secure the tank in an upright position.
13
2
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
CO2 gauge
CO2 tank
Regulator nut
Tan k va lve
Hose clamp
Gas line connector
Hose clamp
CO
2
gas line
Single-tap model
CO2 regulato r
5. NEVER drop or throw a CO2 tank.
6. ALWAYS keep a CO place (preferably 70°F). Securely fasten with a chain in an upright position
tank away from heat. Store extra tanks in a cool
2
when storing.
7. ALWAYS ventilate and leave the area immediately if CO occurred.
leakage has
2
8. ALWAYS check the D.O.T. test date on the tank neck before installation. If the tank if over five (5) years old, do not use it. Return the tank to the gas supplier.
9. NEVER connect a product container unless there are two (2) safety's in the pressure system:
a. The CO
regulator is unpressurized
2
b. The product coupler and gas line are unpressurized.
14
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
CO2 regulato r
CO2 tank
Regulator nut
Tan k va lve
Hose clamp
Gas line connector
Hose clamp
T-connector
CO
2
gas lines
Dual-tap model
Hose clamp
Hose clamp
CO2 gas line
CO
2
gauge

Single-tap model:

1 Feed a hose clamp over the end of the CO 2 Attach that end to the gas line connector on the CO 3 Tighten the clamp to prevent leaks. Leave about ½ inch between the
top of the clamp and the end of the hose. You may need to squeeze with a pliers or crimper.
4 Attach the CO

Dual-tap model:

1 Feed a hose clamp over one end of the CO
2 Attach that end to the gas line connector on the CO 3 Tighten the clamp to prevent leaks. Leave about ½ inch between the
4 Feed a hose clamp over the other end of the CO 5 Insert the T-connector into the end of the gas line, then tighten the
onto the CO
a connector on either end.
top of the clamp and the end of the hose. You may need to squeeze with a pliers or crimper.
hose clamp. Leave about ½ inch between the top of the clamp and the end of the hose.
regulator to the CO2 tank by screwing the regulator nut
2
tank valve and tightening with an adjustable wrench.
2
gas line.
2
regulator.
2
gas line that does not have
2
regulator.
2
gas line.
2
15
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
6 Feed a hose clamp over the non-threaded ends of the other two CO
gas lines.
7 Connect the gas lines to the ends of the T-connector, then tighten the
hose clamps. Leave about ½ inch between the top of the clamp and the end of the hose.
8 Attach the CO
onto the CO (Optional) This unit allows you the option to install the CO retainer on the back to provide for extra space inside the unit. An additional CO

Attach the CO2 tank

You have two options:
A. Inside the kegerator for a cleaner look. Attach the tank through the retainer and secure it with the provided bolt and nut. Position the tank so you can read the gauge and have easy access to the shut-off valve.
B. On the back of the kegerator if you need extra space inside.
1 Align the four holes on the CO
the back of the kegerator.
2 Place the CO 3 Feed the gas line hose through the hole in the back of the unit and
connect to the regulator as you did in the steps above.
regulator to the CO2 tank by screwing the regulator nut
2
tank valve and tightening with an adjustable wrench.
2
back-tank retainer is included in the accessories.
2
tank retainer with the four screws on
2
tank in the retainer.
2
tank
2
2
16
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
Keg coupler
Keg
CO2 regulator
CO
2
tank
CO
2
gas line

Installing and setting up a beer keg

This kegerator/beverage cooler accepts almost all brand name kegs, except for Coors kegs.
Keg sizes that can be used in your kegerator/beverage cooler:
Barrel Liters Gallons Ounces 12 oz. Glasses
1/2 59 15.5 1984 164
1/4 30 7.8 992 82
1/6 20 5.2 661 55
1/8 15 4.0 496 41

Installing the keg coupler

1 Insert the keg coupler into the neck of the beer keg and turn it
clockwise to lock it into position.
2 Make sure the washer is in the connector on the side of the keg
coupler, then attach the CO
3 Make sure the washer is in the connector on the top of the keg
gas line to the connector.
2
coupler, then insert the beer tube into the top of the keg coupler. Tighten the wing nut.
17
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
Pressure gauge Set to 10-12 PSI
Shut-off valve
Adjustment lock nut
Regulator screw
When the gas pressure exceeds 50 PSI, the pressure relief valve will open and gas will be released.
Pressure re lease valve
4 Repeat steps 1-3 if you have a second keg. 5 Pull the black handle on the keg coupler and press it downward until it
locks into position. The keg is now tapped.
Note
If beer comes up through the top of the wing nut, remove the wing nut, reposition the washer, then reattach the wingnut.

Adjusting the CO2 regulator

18
1 Make sure that the shut-off valve is closed (sideways if closed, down if
open), then slowly turn the main valve on the CO2 tank counter-clockwise until it is fully open.
2 Open the shut-off valve to allow gas to flow into the keg. 3 Release the adjustment lock nut, behind the regulator screw, by
turning it clockwise about 5-7 turns.
4 Turn the regulator screw clockwise to increase pressure. The needle on
the gauge starts to climb. Set the gauge to 10-12 PSI.
5 When the tank is at the correct pressure, tighten the adjustment lock
nut by turning it counterclockwise.
6 Allow several minutes for the keg to pressurize. The gauge may show a
drop in pressure while this happens. Adjust as needed.
Note
Listen for a hissing sound at all connections to determine if there are any leaks.
7 Plug the kegerator/beverage cooler into a 120V, 60Hz, 15Amp
grounded outlet.
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler

Using your kegerator/beverage cooler

Setting the temperature

The temperature range of the thermostat goes from 32° F to 45° F (0° C to 7° C). The optimum temperature for serving draught beer is between 34° F - 38° F (1.1° C - 3.3° C). We suggest that you keep an accurate thermometer handy to help you to adjust the temperature setting to your needs.
1 Plug in your kegerator/beverage cooler, set the thermostat set to
maximum (6), then let it run for 48 hours before making any temperature adjustments.
2 After it is fully cooled, adjust the thermostat to desired temperature. 3 Turn the thermostat to the OFF position to turn off your
kegerator/beverage cooler. Turning the thermostat OFF stops the cooling cycle but does not shut off the power to your cooler.
Notes
• If the kegerator/beverage cooler is unplugged or loses power, you must wait three to five minutes before restarting it. If you attempt to restart before this time delay, the kegerator/beverage cooler will not start.
• To change the thermostat setting, adjust it by one increment at a time. Allow several hours for the temperature to stabili ze bet ween adjustments.

Dispensing Beer

Proper foam should leave a tight, creamy head, and the head on the average glass should be 3/4” to 1” high.
1 Allow the keg to cool for 2-4 hours before dispensing beer. 2 Rinse a clean beer glass under cold water. 3 Place the glass under the tap, at a 45° angle, leaving approximately
1/4” between the glass and tap.
19
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
4 Open faucet handle quickly and completely and fill the glass to 2/3
full.
5 Level the glass and finish topping it off by pouring into the center of
the glass.
6 Fully close the tap when the draw is complete.

Automatic defrosting

There is no need to defrost your kegerator/beverage cooler. The defrost water collects at the back of your cooler and passes through a drain outlet into a tray located above the compressor where it evaporates.

Maintaining your kegerator/beverage cooler

Your kegerator/beverage cooler is designed for year-round use with only minimal cleaning and maintenance.
When you first receive it, wipe the case with a mild detergent and warm water, then wipe dry with a dry cloth. Do this periodically to keep your kegerator/beverage cooler looking new.
Caution
To prevent damage to the finish, do not use:
• Gasoline, benzine, thinner, or other similar solvents.
• Abrasive cleaners.
20
Cleaning the interior of your kegerator/beverage cooler:
1 Turn off the kegerator/beverage cooler and unplug it from the wall
outlet.
2 Remove all kegs and beverages. 3 Wash the inside with a damp warm cloth soaked in a solution of one
quart of lukewarm water to two tablespoons of baking soda solution.
4 Wash the shelves and metal plate with a mild detergent solution. 5 Wring excess water out of the sponge or cloth when cleaning around
the controls or any electrical parts.
6 Wash the outside cabinet with warm water and mild liquid detergent.
Rinse well and wipe dry with a clean soft cloth.
7 Be sure to keep the door gasket (seal) clean to keep the unit running
efficiently.
8 Dry the interior and exterior with a soft cloth.
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
Cleaning the beer components
To prevent a build-up of yeast and mold in the beer lines, and to prevent a bad taste, clean your beer components when you replace a keg.
1 Remove the keg coupler and thoroughly rinse it in warm water. 2 Use the included wrench to remove the faucet(s) on the draft arm
assembly. Insert the tip of the wrench into one of the holes on the faucet, rotate it, then thoroughly rinse the faucet in warm water.
3 Clean the beer lines using either a hand pump cleaning kit or a
cleaning can (both sold separately).

Replacing kegs

1 Turn the kegerator/beverage cooler off and disconnect power from
the wall outlet.
2 Close the main valve on the CO 3 Close the shut-off valve on the CO 4 Pull the black handle on the keg coupler and press it upward to close
the connection between the beer keg and the keg coupler.
5 Pull on the tap handle(s) to help drain beer from the lines. 6 Disconnect the beer line(s) and CO 7 Put the beer lines in a bucket to drain the remaining beer from the
lines.
8 Remove the beer keg(s). 9 Remove the keg coupler(s) from the keg(s). 10 Follow the steps in "Installing the keg coupler" to insert a new keg.
tank.
2
regulator.
2
gas line(s) from the keg coupler.
2

Replacing the CO2 tank

1 Turn the kegerator/beverage cooler off and disconnect power from
the wall outlet.
2 Close the main valve on the CO 3 Close the shut-off valve on the CO 4 Disconnect CO 5 Remove the CO 6 Follow the steps in "Installing the CO2 regulator and tank" to insert a
new tank.
gas line from the keg coupler.
2
tank.
2
tank.
2
regulator.
2
21
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler

Storing your kegerator/beverage cooler

If you will be away from your kegerator/beverage cooler for more than three weeks.
1 Turn off the kegerator/beverage cooler and unplug it from the wall
outlet.
2 Remove all kegs and beverages. 3 Clean and dry the interior of the kegerator/beverage cooler. 4 Leave the door open slightly to avoid possible formation of
condensation, mold, or odor.
Caution
Use extreme caution with children. The unit should not be accessible to child's play.

Moving your kegerator/beverage cooler

1 Turn off the kegerator/beverage cooler and unplug it from the wall
outlet.
2 Remove all kegs and beverages. 3 Securely tape down all loose items inside your kegerator/beverage
cooler.
4 Tap e the door shu t .
Be sure the kegerator/beverage cooler stays in the upright position during transportation and protect the exterior with a blanket or similar padding.

Converting your beer dispenser to a beverage refrigerator

1 Follow the steps in "Replacing kegs" and "Replacing the CO2 tank." 2 Remove the draft arm assembly and pull the beer line thru the top of
the cabinet.
3 Replace the top cabinet plug. 4 Remove the guard rail and cover the guard rail installation holes with
the plugs provided.
5 Install the two wire shelves. 6 Adjust the temperature as desired.
22
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler

Troubleshooting - beer quality

Problem Possible cause Possible solution
Excess formation of foam “head.” Beer is all foam, or too much foam and not enough liquid beer.
Flat beer - no formation of foam. The foamy head disappears quickly and the beer lacks its usual zestful brewery fresh flavor.
No beer flow from the beer faucet.
Sputtering draw. System requires cleaning. See “Maintaining your kegerator/beverage cooler.”
Faucet dripping. Handle not fully returned to
Rapid CO2 tank discharge.
Difficulty manipulating faucet handle.
Recent keg agitation. If the keg has recently been moved, let it stand a minimum of
Improper regulator setting. Verify that the (CO
The Internal temperature of the kegerator is too warm.
Pressure b uild up. Activate the press ure relief valve located on the keg coupler for
Improper draw technique. See “Dispensing Beer.”
Improper regulator setting. Make sure that the (CO2) pressure is reading between
Glassware is not clean enough. Residue on glassware in the form of oils quickly dissolves the
Dispensing hose too long. All recommended temperatures and gauge settings are
Low/Empty CO2 tank. Make sure that the CO2 tank has pressure.
Closed CO
valve and/or
2
shutoff valve.
Empty beer keg. Replace beer keg.
Line or dispenser obstructions. Verify that there are no kinks or obstructions in either the air
Improper connections(s). Make sure that all connections are secure and all seals are in
Keg tap installed incorrectly. Check seal between the keg the faucet.
Obstructions in the line or dispenser.
Improper draw technique. See “Dispensing Beer.”
close position.
Faucet requires cleaning. See “Maintaining your kegerator/beverage cooler.”
Improper connection causing an air line leak.
Faucet requires cleaning. See “Maintaining your kegerator/beverage cooler.”
Damaged faucet handle. Remove the faucet handle and connector nuts and inspect for
two hours before tapping.
) pressure is reading between 10 and 12 PSI.
2
Make sure that the kegerator is cooling between the high 30s to mid 40s. If the beer keg has been exposed to a warm environment for an extended period, give it sufficient time to cool before attempting to draw beer.
three seconds.
10 and 12 PSI.
formation of foam. Make sure that the glassware is clean.
calculated for a five foot hose. Use a shorter hose.
Make sure that both the CO2 tank and regulator shutoff valve are open.
line or the dispenser line and that neither are frozen.
place and in good condition.
Verify that there are no obstructions in either the air line or dispenser line and that neither are frozen.
After every pour, make sure that the handle is returned to the off position.
Make sure that all lines are properly connected and/or check air line for possible leaks.
possible damage.
23
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
Problem Possible cause Possible solution
Abnormal beer taste and/or smell.
System requires cleaning. See “Maintaining your kegerator/beverage cooler.”
System contamination. Check hoses for possible air leaks.
The beer has exceeded its shelf life.
Replace the beer keg with a fresh one.

Troubleshooting - cooler

Caution
Do not try to repair your kegerator/beverage cooler yourself. Doing so invalidates the warranty.
You can solve many common beer dispenser problems easily, saving yourself the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the service center.
Problem Possible cause Possible solution
The kegerator/beverage cooler does not operate
The cooler door does not close completely
The cooler is not cold enough
The kegerator/beverage cooler is unplugged.
The fuse on the circuit is blown or the circuit breaker is tripped.
Power failure. If a power failure occurs, the kegerator/beverage cooler turns
The door was not properly installed.
The shelf is out of position. Adjust the shelf properly.
The door gaskets are dirty. Clean the door gaskets.
The cooler is not level. Level the cooler with the leveling feet.
The door has been opened too often or was not closed properly.
You have just added a large amount of warm beverage to the cooler.
The temperature control is set too warm.
Make sure that the kegerator/beverage cooler is plugged in and that the plug is pushed completely into the outlet.
Check the house fuse/circuit breaker box and replace the fuse or reset the circu it breaker.
off. Wait until the power is restored, then turn it on again.
Make sure that the door was properly installed.
Make sure that the door is closed properly.
Allow time for the new beverage to cool, then check again.
Set the control to a colder setting.
24
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
Problem Possible cause Possible solution
The cooler turns on and off frequently
The kegerator/beverage cooler makes unusual noises or vibrates
Moisture is building up in the interior of the cooler
The room temperature is hotter than normal.
The door has been opened too often or was not closed properly.
The door gaskets do not seal properly.
The temperature control is set too warm.
The kegerator/beverage cooler may not be level on the floor.
The body of the kegerator/beverage cooler is touching a wall.
• A rattling noise may be heard. This is caused by the flow of refrigerent in the kegerator/beverage cooler.
• As each cooling cycle ends, you may hear gurgling sounds.
• Contraction and expansion of the inside walls may cause popping or crackling noises.
The door has been opened too often or was not closed properly.
The cooler is in a location that is very humid.
The bottles in the cooler is not packaged properly.
Make sure that the door was properly installed.
Make sure that the door is closed properly.
Clean the door gaskets.
Set the control to a colder setting.
Level the kegerator/beverage cooler with the leveling feet.
Move the kegerator/beverage cooler out from the wall.
This is normal.
Make sure that the door is closed properly.
Move the cooler to a dryer location.
Rearrange the bottles in the cooler to make sure that it is sealed.

Specifications

Dimensions (HxWxD) 33.7 x 23.6 x 23.6 in. (85.5 x 60.0 x 60.0 cm)
Weight Single tap - 101.4 lbs. (46 kg)
Power requirements 115V~60Hz
Current 0.86 A
Power consumption (annual) 310 kwh
Dual tap - 103.6 lbs. (47 kg)
25
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler

ONE-YEAR LIMITED WARRANTY - INSIGNIA

Definitions:

The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).
For this warranty to apply, your Product must be purchased in the United States or Canada from a Best Buy branded branded retail store or online at www.bestbuy.com or www.bestbuy.ca, and is packaged with this warranty statement.

How long does the coverage last?

The Warranty Period lasts for 1 year (365 days) from the date you purchased the Product. Your purchase date is printed on the receipt you received with the Product.

What does this warranty cover?

During the Warranty Period, if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts. Products and parts replaced under this warranty become the property of Insignia and are not returned to you. If service of Products or parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Insignia Product during the Warranty Period. Warranty coverage terminates if you sell or otherwise transfer the Product.

How to obtain warranty service?

If you purchased the Product at a Best Buy retail store location, please take your original receipt and the Product to any Best Buy store. Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging. If you purchased the Product from a Best Buy online web site (www.bestbuy.com or www.bestbuy.ca), mail your original receipt and the Product to the address listed on the web site. Make sure that you put the Product in its original packaging or packaging that provides the same amount of protection as the original packaging.
To obtain warranty service, in the United States call 1-888-BESTBUY, Canada call 1-866-BESTBUY. Call agents may diagnose and correct the issue over the phone.

Where is the warranty valid?

This warranty is valid only in the United States and Canada at Best Buy branded retail stores or websites to the original purchaser of the product in the county where the original purchase was made.

What does the warranty not cover?

This warranty does not cover:
• Food loss/spoilage due to failure of refrigerator or freezer
• Customer instruction/education
•Installation
•Set up adjustments
• Cosmetic damage
• Damage due to weather, lightning, and other acts of God, such as power surges
• Accidental damage
•Misuse
•Abuse
•Negligence
26
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
• Commercial purposes/use, including but not limited to use in a place of business or in communal areas of a multiple dwelling condominium or apartment complex, or otherwise used in a place of other than a private home.
• Modification of any part of the Product, including the antenna
• Display panel damaged by static (non-moving) images applied for lengthy periods (burn-in).
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage or power supply
• Attempted repair by any person not authorized by Insignia to service the Product
• Products sold “as is” or “with all faults”
• Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)
• Products where the factory applied serial number has been altered or removed
• Loss or Theft of this product or any part of the product
• Display panels containing up to three (3) pixel failures (dots that are dark or incorrectly illuminated) grouped in an area smaller than one tenth (1/10) of the display size or up to five (5) pixel failures throughout the display. (Pixel based displays may contain a limited number of pixels that may not function normally.)
• Failures or Damage caused by any contact including but not limited to liquids, gels or pastes.
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Insignia: For customer service please call 1-877-467-4289 www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC ©2017 Best Buy. All rights reserved. Made in China
27
www.insigniaproducts.com 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC ©2017 Best Buy. All rights reserved. Made in China.
V4 ENGLISH
17-0037
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use