Insignia NS-46L400NA14 User Manual

User Guide
46" LCD TV
NS-46L400NA14
Before using your new product, please read these instructions to prevent any damage.
Contents
CHILD SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
INlink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing the stand or wall-mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing a wall-mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
TV components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
What connection should I use? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting a cable or satellite box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using HDMI (best) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using DVI (same as HDMI but requires an audio connection) . . . . . . . . . . . . . . . . . . . . . . . . 12
Using component video (better) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using composite video (good) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Using coaxial (good) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Connecting an antenna or cable TV (no box) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connecting a DVD or Blu-ray player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Using HDMI (best) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Using DVI (same as HDMI but requires an audio connection) . . . . . . . . . . . . . . . . . . . . . . . . 18
Using component video (better) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using composite video (good) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Connecting a game console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Using HDMI (best) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Using component video (better) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using composite video (good) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Connecting a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Using VGA (most common) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Using HDMI (best) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using DVI (same as HDMI but requires an audio connection) . . . . . . . . . . . . . . . . . . . . . . . . 26
ii
www.insigniaproducts.com
Contents
Connecting a USB flash drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Connecting headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Connecting a basic home theater system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Using digital audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Using analog audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Connecting a home theater system with multiple devices . . . . . . . . . . . . . . . . . . . 31
Connecting power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Installing remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Aiming the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Turning on your TV for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Understanding the basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Turning your TV on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Selecting the video input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
On-screen menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Navigating the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Selecting a channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Viewing channel information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Adjusting the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Adjusting the TV picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Setting the power on picture mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Adjusting the computer image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Adjusting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Adjusting sound settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Selecting the audio out mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Playing TV audio only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Changing channel settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Automatically scanning for channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Hiding channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Setting up a favorite channel list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Viewing a favorite channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Adding or changing a channel label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Checking the digital signal strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Automatically adjusting the aspect ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Setting parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Setting or changing the password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Locking control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Blocking unrated TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Setting parental control levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Downloading rating information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
www.insigniaproducts.com
iii
Using closed captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Turning closed captioning on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Selecting the analog closed captioning mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Selecting the digital closed captioning mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Customizing digital closed captioning settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Adjusting time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Setting the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Adjusting menu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Selecting the menu language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Labeling an input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Turning Input Sensor on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Using INlink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Turning INlink on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Turning Device Auto Power Off on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Turning TV Auto Power On on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Turning Audio Receiver on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Displaying a list of INlink-compatible (HDMI CEC) devices . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Waking INlink-compatible (HDMI CEC) devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Opening an INlink-compatible device’s root menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Contents
Using a USB flash drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Switching to USB mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Browsing photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Viewing favorite photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Viewing photos in a slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Customizing slideshow settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Maintaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Cleaning the TV cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Cleaning the TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Restoring settings to the defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Viewing system information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Video and audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
INlink (CEC-compatible) device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Programming universal remote controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Common universal remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
iv
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
One-year limited warranty - Insignia Televisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
www.insigniaproducts.com
f
It makes a difference how and where you use
As you enjoy your new product, keep these
The issue
The home theater entertainment experience is a growing trend, and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturer’s recommendations. We and the consumer electronics industry are committed to making home entertainment enjoyable and safe.
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and cause injury.
Tune into safety
One size of TV stand does not fit all. Use only a TV stand rated for the weight of your TV.
Carefully read and understand all enclosed instructions for proper use of this product.
Don’t let children climb on or play with entertainment system furniture and TVs.
Don’t place TVs on furniture that can easily be used as steps, such as a crate or chest of drawers.
Remember that children can become excited while watching a program, especially on a “larger-than-life” TV. Make sure that you place or install the TV where it cannot be pushed, pulled over, or knocked down.
Make sure that you route all cords and cables so that they cannot be pulled or grabbed by curious children.

CHILD SAFETY

your flat panel display
safety tips in mind
Wall mounting
If you decide to wall mount your TV, always remember:
One size of wall mount does not fit all. Use only a wall mount rated for the weight of your TV and that has been recommended by this TV manufacturer, listed in this manual, or otherwise listed by an independent laboratory as suitable for your TV.
Follow all instructions supplied by the TV and wall mount manufacturers.
If you have any doubts about your ability to safely wall mount your TV, get help from a professional installer.
Make sure that the wall where you are mounting the TV is appropriate. Some wall mounts are not designed to be mounted to walls backed with steel studs or cinder blocks. If you are unsure, ask a professional installer.
TVs can be heavy. At least two people are required for safe wall mount installation.
www.insigniaproducts.com
1
NS-46L400NA14

Important Safety Instructions

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV.
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV.
1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15 The wall plug is the disconnecting device. The
plug must remain readily operable.
16 Remote control batteries should not be exposed
to excessive heat such as sunshine, fire, or the like.
17 The apparatus should not be exposed to
dripping or splashing, and no objects filled with liquids, such as vases, should be placed on the apparatus.

WARN ING

Electric shock hazard
To reduce the risk of fire or electric shock, do not remove any cover or expose the device to rain or moisture. No user-serviceable parts are inside. Refer servicing to qualified service technicians.
Lightning
For added protection for your device receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the power outlet and disconnect any antenna or cable system. This helps prevent property damage and personal injury from lightning and power line surges.
Power lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, take extreme care to keep from touching such power lines or circuits as contact with them might be fatal.
Handling the LCD panel
• Your TV’s screen is made of glass. Do not drop your TV or hit, jolt, or press hard against the LCD panel. If the screen breaks, be careful of broken glass.
• If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation.
• If the liquid gets in your mouth, immediately gargle, rinse, and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.
Replacement parts
When replacement parts are required, make sure that the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, personal injury, or other hazards.
2
www.insigniaproducts.com
Safety check
After completing any service or repair to this device, ask the service technician to perform routine safety checks to determine that your TV is in correct operating condition.
Power source
Operate your TV only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult an electrician or your local power company.
Servicing
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

CAUTION

Damage requiring service
Unplug this TV from the power outlet and refer servicing to qualified service personnel under the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If liquid has been spilled or objects have fallen into your TV.
• If your TV has been exposed to rain or water.
• If your TV does not operate normally by following the operating instructions. Adjust only those controls covered by the operating instructions because incorrect adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore your TV to its normal operation.
• If your TV has been dropped or damaged in any way.
• When your TV exhibits a distinct change in performance.
Outdoor antenna grounding
If an outside antenna or cable system is connected to your TV, make sure that the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to correct grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of the antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Antenna lead-in wire
1
Grounding clamp
2
Antenna discharge
3
unit Grounding
4
conductors Ground clamps
5
Power service
6
grounding electrode system
Electric service
7
equipment
Note to CATV system installer
Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides guidance for correct grounding. Specifically, it states that the cable ground must be connected to the grounding system of the building as close to the point of cable entry as practical.
Condensation
Moisture will form on the TV if the TV is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, the TV's performance may be impaired. To prevent this, let the TV stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.
Condensation may also form during the summer if the TV is exposed to the breeze from an air conditioner. In such cases, change the location of the TV.
Mobile telephone warning
To avoid interference with your TV picture and sound, operating problems, or even damage, keep your cordless and cellular telephones away from the TV.
End of life directives
Your TV contains tin-lead solder containing a small amount of mercury. Disposal of this material may be regulated for environmental reasons. Your TV also contains material that can be recycled and reused. For disposal or recycling information, contact your local authorities to find a recycler in your area.
Non-active pixels
The LCD panel contains almost 3 million thin film transistors, which provide exceptionally sharp video quality. Occasionally, a few non-active pixels may appear on the screen as a fixed blue, green, or red point. These non-active pixels do not adversely affect the performance of your TV, and are not considered defects.
www.insigniaproducts.com
3
NS-46L400NA14 Insignia 46" LCD TV
Insignia 46" LCD TV

Introduction

Congratulations on your purchase of a high-quality Insignia product. Your NS-46L400NA14 represents the state of the art in LCD TV design and is designed for reliable and trouble-free performance.

INlink

Enjoy the benefit of having HDMI CEC compatible products plug and play! No setup is needed! CEC technology lets different components discover and communicate with each other. (See page 57 for instructions on how to use INlink.)

Installing the stand or wall-mount bracket

Notes
• If you plan to wall-mount your TV, do not install the stand.
• Store the stand and stand screws in case you decide to use the stand in the future.

Installing the stand

To install the stand:
1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and
scratches.
2 Find the front of the stand. Attach the stand to the TV by hooking the slot in the stand onto the tab on the stand
column , then push the stand into place.
Front of TV stand
4
www.insigniaproducts.com
Insignia 46" LCD TV
3 Secure the stand with the six provided screws.
Screw type Screw length # of screws
M4 16 mm 6

Installing a wall-mount bracket

Warning
This TV is intended to be supported by a UL Listed wall mount bracket with suitable weight/load. (See “Miscellaneous” on page 71.)
To attach your TV to a wall-mount bracket:
1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and
scratches.
2 Remove the six screws that secure the stand column to the TV.
www.insigniaproducts.com
5
NS-46L400NA14 Insignia 46" LCD TV
3 Remove the stand column.
4 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions
that came with the wall-mount bracket for information about how to correctly hang your TV.
Notes
• The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths.
• The mounting holes on the back of your TV take type M6 screws.
Wall-mount
brackets
15.75 in. (400 mm)
7.87 in. (200 mm)
6
www.insigniaproducts.com
Insignia 46" LCD TV

TV components

Package contents

•46" LCD TV
• Remote control and batteries (2 AAA)
• TV stand and screws (6)
• Quick Setup Guide
• Important Information

Front

# Item Description
Turns off when your TV is on.
1
Power indicator
Remote control
2
sensor
3
MENU
4
INPUT
5
VOL+/VOL–
6
CH /CH
7
Lights red when your TV is off (standby mode).
Receives signals from the remote control. Do not block.
Press to open the on-screen menu. For more information, see “Navigating the menus” on page 37.
Press one or more times to select the video input source your want, then wait a few seconds. Your TV switches to the source you selected. For more information, see “Selecting the video input
source” on page 36.
In menu mode, press to confirm selections.
Press to increase or decrease the volume.
Press to go to the next or previous channel in the channel list. For more information, see “Selecting
a channel” on page 38.
Press to turn your TV on or off (standby mode).
Warning: When your TV is off, power still flows through it. To completely disconnect power, unplug the power cord.
www.insigniaproducts.com
7
NS-46L400NA14 Insignia 46" LCD TV

Side

# Item Description
Connect an antenna or cable TV to this jack. For more information,
1
ANT/CABLE IN
DIGITAL OUTPUT
2
(optical)
3
L and R AUDIO
COMPONENT IN/ AV I N
VIDEO/Y, P
4
OR COMPONENT IN/
AV I N VID EO/Y
B
, P
see “Using coaxial (good)” on page 15 or “Connecting an
antenna or cable TV (no box)” on
page 16. Connect a digital audio amplifier
or home theater system to this jack to listen to TV audio through the amplifier speakers. For more information, see “Using digital
audio” on page 29.
Connect the audio for a component video device to these jacks. For more information, see “Using component video (better)” on page 13, 19, or 22.
OR Connect the audio for a
composite video device to these jacks. For more information, see “Using composite video (good)” on page 14, 20, or 23.
The COMPONENT IN/AV IN VIDEO/Y jack works as one of the three component video jacks or as a composite video jack.
Connect the video for a component video device to these jacks. For more information, see “Using component video (better)
R
on page 13, 19, or 22. OR Connect the video for a
composite video device to the COMPONENT IN/AV IN VIDEO/Y jack. For more information, see “Using composite video (good)” on page 14, 20, or 23.
# Item Description
Connect headphones, an analog audio amplifier, a home theater
5
/AUDIO OUT
system, or a sound bar to this jack. For more information, see “Using analog audio” on page 30.
Connect the video (VGA) for a
6
VGA
computer to this jack. For more information, see “Using VGA
(most common)” on page 24.
Connect the audio for a computer to this jack. For more information see “Using VGA (most common)” on page 24.
OR
7
PC/DVI AUDIO IN
Connect the audio for a DVI device to this jack. For more information see, “Using DVI (same
as HDMI but requires an audio connection)” on pages 12, 18,
or 26. Connect an HDMI device to this
jack. For more information, see “Using HDMI (best)” on pages 11,
17, 21, or 25.
OR
8
HDMI1/DVI
Connect the video for a DVI device to the HDMI1/DVI jack. For more information, see “Using
DVI (same as HDMI but requires an audio connection)” on
pages 12, 18 or 26. Connect an HDMI device to this
jack. For more information, see “Using HDMI (best)” on pages 11,
9
HDMI2/ARC
17, 21, or 25.
OR Connect a home theater to the
HDMI 2/ARC jack. Connect an HDMI device to this
10
HDMI3
jack. For more information, see “Using HDMI (best)” on pages 11,
17, 21, or 25.
Connect a USB flash drive to this jack to view compatible JPEG picture files. For more
11
USB
information, see “Connecting a
USB flash drive” on page 27 and
Using a USB flash drive” on page 60.
8
www.insigniaproducts.com
Insignia 46" LCD TV

Remote control

# Button Description
Press to turn your TV on or off (standby mode).
1
(power)
2
Numbers
3
4
ENTER
5
MENU Press to open the on-screen menu.
6
EXIT Press to close the on-screen menu.
7
ASPECT
8
VOL+/– Press to increase or decrease the volume.
Warn ing: When your TV is off, power still flows through it. To disconnect power, unplug the power cord.
Press to enter channel numbers and the parental control password.
Press to enter a digital sub-channel number. For more information, see “Selecting a channel” on page 38.
Press to confirm selections or changes or to open sub-menus.
Press to change how the picture looks on the screen (aspect ratio). For more information, see the “Aspect Ratio” option in “Adjusting the TV picture” on page 38.
# Button Description
10
FAVOR ITE
11
INlink controls
12
INPUT
13
(return) In TV mode, press to return to the previous channel.
14
S T W X
15
(home) Press to open the on-screen menu.
16
INFO*
17
CCD
18
MUTE
19
CH /CH
Press to open the Favo rite channel list. For more information , see “Setting up a favorite channel list” on page 45 and “Viewing a favorite channel” on page 45.
Press to control INlink-compatible (HDMI CEC) devices. For more information, see “Us ing INlink” on page 57.
Press to open the INPUT SOURCE list, press S or T on the remote control to select the video input source, then press ENTER. For more information, see “Selecting the video input source” on page 36.
Press to nav igate in on-screen menus and to adjust settings.
Press to display TV status information, such as the channel number, channel name (if available), o r signal source. For more information, see “Viewing channel
informati on” on page 38.
Press to turn close d capti oning o n or of f. You can s elect CC Of f, CC On, or CC on When Mute. For more information, see “Turning closed captioning on or off on page 51.
Press to mute the sound. Press again to restore the sound.
Press to change TV channels. For more information, see “Selecting a channel” on page 38.
Press to select the audio mode for an analog program. You can select:
Mo no—Select this option if there is noise or static on weak stereo broadcasts.
20
21
22
MTS/SAP
PICTURE
AUDIO
Stereo—Select this option for programs broadcast in stereo.
SAP—Select this option to listen to a secondary audio program, if available.
OR Press to select the audio language for a digital
program, if alternate languages are available.
Press to select the picture mode. You can select Vivid, Standard, Energy Savings, Movie, or Custom. For more information, see “Picture Mode” in “Adjusting
the TV picture” on page 38.
Press to select the sound mode. You can select Standard, Theater, Musi c, News, or Custom. For more information, see “S ound Mode” in “Adjusting
sound settings” on page 41.
9
SLEEP
Press to set the sleep timer. You can select Off, 5, 10, 15, 30, 60, 90, 120, 180, or 240 minutes. For more information, see “Setting the sleep timer” on page 55.
www.insigniaproducts.com
9
NS-46L400NA14 Insignia 46" LCD TV

What connection should I use?

Your TV has several connection types for connecting devices to your TV.
For the best video quality, you should connect a device to the best available connection.
Use the following tables to identify cables:
Video quality
Best (use this
if your devices
have HDMI)
Better than
composite or
coaxial
Connection type and jack
HDMI
video/audio
Component
video (requires
an audio
connection)
Cable connector
Connection type and jack
Optical digital
audio
Analog audio
input
Analog audio
output
Cable connectors
Better than
coaxial
Good
Composite video
(requires an
audio
connection)
Coaxial
video/audio
VGA (computer)
video and audio
You can use the HDMI1/DVI jack on your TV to connect a DVI device to your TV. You need to attach an HDMI-to-DVI adapter to the end of the HDMI cable that connects to the DVI device.
Cautions
• Check the jacks for position and type before making any connections.
• Loose connections can result in image or color problems. Make sure that all connections are tight and secure.
• The external audio/video equipment shown may be different from your equipment. If you have questions, refer to the documentation that came with your equipment.
• Always unplug the power cord when connecting external equipment.
10
www.insigniaproducts.com
Insignia 46" LCD TV

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. For more information, see “What connection should I use?” on page 10.

Using HDMI (best)

Side of TV
On your TV
HDMI cable
connector
HDMI jack
Cable or
satellite box
HDMI cable
To connect a cable or satellite box using HDMI:
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT
jack on the cable or satellite box.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Press INPUT to open the INPUT SOURCE list. 6 Press
S
or T to highlight HDMI 1, HDMI 2, or HDMI 3, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to use any audio cables.
www.insigniaproducts.com
11

Using DVI (same as HDMI but requires an audio connection)

Note
You must use the HDMI1/DVI jack to connect a cable or satellite box. If you use another HDMI jack, you will not hear sound from the TV speakers.
NS-46L400NA14 Insignia 46" LCD TV
Side of TV
On your TV
HDMI cable
connector
HDMI1/DVI
jack
To connect a cable or satellite box using DVI:
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the cable or satellite box. 4 Connect the other end of the cable to the HDMI1/DVI jack on the side of your TV. 5 Connect a 3.5mm audio cable (not provided) to the PC/DVI AUDIO IN jack on the side of your TV and to the
AUDIO OUT jacks on the cable or satellite box.
3.5mm audio cable
connector
PC/DVI
AUDIO IN
jack
3.5mm audio cable
Cable or
satellite box
HDMI cable with
HDMI-DVI adapter
Note
When you connect the audio using the PC/DVI AUDIO IN jack, the audio output is analog.
6 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 7 Press INPUT to open the INPUT SOURCE list. 8 Press
S
or T to highlight HDMI 1, then press ENTER.
12
www.insigniaproducts.com
Insignia 46" LCD TV

Using component video (better)

Note
Cables are often color-coded to match color-coded jacks.
Cable or
satellite box
Side of TV
On your TV
Component
video cable connectors
Analog
audio cable
connector
Audio
cable
Component
video jacks
Analog
audio jacks
Component video cable
To connect a cable or satellite box using component video:
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a component video cable (not provided) to the COMPONENT IN/AV IN VIDEO/Y, P
B
, and PR video
jacks on the side of your TV and the component video out jacks on the cable or satellite box.
4 Connect an audio cable (not provided) to the L and RAUDIO jacks on the side of your TV and to the audio out
jacks on the cable or satellite TV box.
Notes
•The COMPONENT IN/AV IN VIDEO/Y, P
B
, and PR video jacks (used to connect a component device) share the L and R AUDIO jacks with the COMPONENT IN/AV IN VIDEO/Y jack (used to connect a composite device).
• When you connect the audio using the L and R AUDIO jacks, the audio output is analog.
5 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 6 Press INPUT to open the INPUT SOURCE list. 7 Press
S
or T to select Component/AV, then press ENTER.
www.insigniaproducts.com
13

Using composite video (good)

Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green COMPONENT IN/AV IN VIDEO/Y jack.
NS-46L400NA14 Insignia 46" LCD TV
Cable or
satellite box
On your TV
Composite
video cable
connector
Composite
video jack
To connect a cable or satellite box using composite video:
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an AV cable (not provided) to the COMPONENT IN/AV IN VIDEO/Y jack and L and R AUDIO jacks on
the side of your TV and to the composite video and audio out jacks on the cable or satellite box.
Analog audio
cable
connectors
Analog
audio jacks
AV cable
(composite video cable)
Side of TV
Notes
•The COMPONENT IN/AV IN VIDEO/Y, P connect a component device) share the L and R AUDIO jacks with the COMPONENT IN/AV IN VIDEO/Y jack (used to connect a composite device).
• When you connect the audio using the L and R AUDIO jacks, the audio output is analog.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Press INPUT to open the INPUT SOURCE list. 6 Press
S
or T to select Component/AV, then press ENTER.
B
, and PR video jacks (used to
14
www.insigniaproducts.com
Insignia 46" LCD TV

Using coaxial (good)

Side of TV
On your TV
Coaxial cable
connector
ANT/CABLE IN
jack
To connect a cable or satellite box using coaxial:
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the side of your TV and to the coaxial out
jack on the cable or satellite box.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Press INPUT to open the INPUT SOURCE list. 6 Press 7 If you cannot tune to channels you know exist, scan for channels. See “Automatically scanning for channels” on
S
page 43.
or T to select TV, then press ENTER.
Cable or
satellite box
Coaxial cable
Notes
• Use a coaxial cable to eliminate interference and noise from radio waves.
• Do not bundle the coaxial cable with the power cord or other cables.
www.insigniaproducts.com
15
NS-46L400NA14 Insignia 46" LCD TV

Connecting an antenna or cable TV (no box)

Side of TV
On your TV
Coaxial cable
connector
ANT/CABLE IN
jack
Antenna or cable TV
To connect an antenna or cable TV (no box):
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the side of your TV and to the antenna or
cable TV wall jack.
3 Plug your TV’s power cord into a power outlet, then turn on your TV. 4 Press INPUT to open the INPUT SOURCE list. 5 Press 6 If you cannot tune to channels you know exist, scan for channels. See “Automatically scanning for channels” on
S
page 43.
or T to select TV, then press ENTER.
Coaxial cable
(no box)
Notes
• Use a coaxial cable to eliminate interference and noise from radio waves.
• Do not bundle the coaxial cable with the power cord or other cables.
• If the antenna is not installed correctly, contact qualified service personnel to correct the problem.
• If the signal level for a channel is weak, the picture may be distorted. Adjust the antenna or use a highly directional outdoor or set-top antenna with a built-in amplifier.
• If the picture quality is good on some channels and poor on others, the problem may be caused by a poor or weak signal from the broadcaster or cable TV provider.
• If you connect to cable or satellite TV without a set-top box and experience poor picture quality, you may need to install a set-top box to improve signal reception and picture quality. Contact your cable or satellite TV provider about upgrading to a set-top box.
• Many high-definition (HD) channels upscale standard-definition (SD) content. The picture displayed on your TV is still displayed as SD, thus the picture quality will not be as clear or crisp as it would be if the content was originally recorded in HD.
16
www.insigniaproducts.com
Insignia 46" LCD TV

Connecting a DVD or Blu-ray player

Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best connection type available. For more information, see “What connection should I use?” on page 10.

Using HDMI (best)

Side of TV
On your TV
HDMI cable
connector
HDMI jack
DVD or Blu-ray player
HDMI cable
To connect a DVD or Blu-ray player using HDMI:
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT
jack on the DVD or Blu-ray player.
3 Plug your TV’s power cord into a power outlet, then turn on your TV. 4 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
5 Press INPUT to open the INPUT SOURCE list. 6 Press
S
or T to highlight HDMI 1, HDMI 2, or HDMI 3, then press ENTER.
www.insigniaproducts.com
17

Using DVI (same as HDMI but requires an audio connection)

Note
You must use the HDMI1/DVI jack to connect a DVD or Blu-ray player using DVI. If you use another HDMI jack, you will not hear sound from the TV speakers.
NS-46L400NA14 Insignia 46" LCD TV
Side of TV
On your TV
HDMI cable
connector
HDMI1 /DVI
jack
To connect a DVD or Blu-ray player using DVI:
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
3 Connect the other end of the cable to the HDMI1/DVI jack on the side of your TV. 4 Connect a 3.5mm audio cable (not provided) to the PC/DVI AUDIO IN jack on the side of your TV and to the
3.5mm audio cable
connector
PC/DVI
AUDIO IN
jack
adapter to the DVI OUT jack on the DVD or Blu-ray player.
AUDIO OUT jacks on the DVD or Blu-ray player.
DVD or Blu-ray player
3.5mm audio cable
HDMI cable with
HDMI-DVI adapter
Note
When you connect the audio using the PC/DVI AUDIO IN jack, the audio output is analog.
5 Plug your TV’s power cord into a power outlet, then turn on your TV. 6 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
7 Press INPUT to open the INPUT SOURCE list. 8 Press
S
or T to select HDMI 1, then press ENTER.
18
www.insigniaproducts.com
Insignia 46" LCD TV

Using component video (better)

Note
Cables are often color-coded to match color-coded jacks.
On your TV
DVD or Blu-ray player
Side of TV
Component
video cable connectors
Analog audio
cable
connectors
Audio
cable
Component
video jacks
Analog
audio jacks
Component video cable
To connect a DVD or Blu-ray player using component video:
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect a component video cable (not provided) to the COMPONENT IN/AV IN VIDEO/Y, P
the side of your TV and to the COMPONENT OUT jacks on the DVD or Blu-ray player.
3 Connect an audio cable (not provided) to the L and RAUDIO jacks on the side of your TV and to the
L and RAUDIO OUT jacks on the DVD or Blu-ray player.
Notes
•The COMPONENT IN/AV IN VIDEO/Y, P
B
, and PR video jacks (used to connect a component device) share the L and R AUDIO jacks with the COMPONENT IN/AV IN VIDEO/Y jack (used to connect a composite device).
• When you connect the audio using the L and R AUDIO jacks, the audio output is analog.
B
, and PR jacks on
4 Plug your TV’s power cord into a power outlet, then turn on your TV. 5 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
6 Press INPUT to open the INPUT SOURCE list. 7 Press
S
or T to select Component/AV, then press ENTER.
www.insigniaproducts.com
19

Using composite video (good)

Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green COMPONENT IN/AV IN VIDEO/Y jack.
On your TV
NS-46L400NA14 Insignia 46" LCD TV
Side of TV
DVD or Blu-ray player
Composite
video cable
connector
Composite
video jack
To connect a DVD or Blu-ray player using composite video:
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an AV cable (not provided) to the COMPONENT IN/AV IN VIDEO/Y jack and L and R AUDIO jacks on
the side of your TV and to the AV O UT jacks on the DVD or Blu-ray player.
Analog audio
cable
connectors
Analog
audio jacks
Note
•The COMPONENT IN/AV IN VIDEO/Y, P connect a component device) share the L and R AUDIO jacks with the COMPONENT IN/AV IN VIDEO/Y jack (used to connect a composite device).
• When you connect the audio using the L and R AUDIO jacks, the audio output is analog.
(composite video cable)
AV cable
B
, and PR video jacks (used to
20
3 Plug your TV’s power cord into a power outlet, then turn on your TV. 4 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
5 Press INPUT to open the INPUT SOURCE list. 6 Press
S
or T to select Component/AV, then press ENTER.
www.insigniaproducts.com
Loading...
+ 56 hidden pages