Insignia NS-32D201NA14 User Manual

TM
QUICK SETUP GUIDE
START HERE
How do I attach the stand to my TV?
(not for wall mounting)
You’ll need: A Phillips screwdriver and a soft surface to lay the TV on. A Carefully place your TV face-down on a cushioned, clean surface
to protect the screen from damages and scratches. B Secure the stand column to the TV using the three provided T4 12 mm screws.
(These are the short screws.) C Secure the TV stand to the stand column with the provided T4 14 mm screw.
(This is the long screw.)
A
T4 (12 mm) screws
TV stand
T4 (14 mm) screw
Front
32" LED TV
NS-32D201NA14
Thank you
for purchasing this state-of-the-art
Insignia television. We hope you enjoy
the quality and reliability of this
television for years to come.
- OR -
How do I prepare my TV for wall mounting?
(not for use with a TV stand)
• Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages
and scratches. See the instructions that came with your wall mount for more information about how to correctly mount your TV.
Which cables do you have?
Your TV has several dierent jacks for connecting devices. For the
STOP!
Do not plug your
power cord in until all
other devices have
been connected.
best video quality, use the best available connection. Use the cables that came with your devices.
VIDEO QUALITY
BEST
BETTER
Component video and analog audio
JACK TYPE CABLE CONNECTOR
HDMI video/audio
GOOD
Composite video and analog audio
Included accessories
GOOD
Coaxial video/audio
MAKING CONNECTIONS
How do I watch TV (cable or satellite receiver) or connect a device such as a DVD or Blu-ray Disc player, game console, or camcorder?
Using an HDMI cable (BEST)
Multi-purpose jacks: You can plug any
device that uses HDMI into either HDMI jack. However, certain devices must be connected to the DVI+ARC or MHL jack. See the instructions that came with your ARC, DVI, or MHL-enabled device for more information.
Note: The HDMI1(DVI+ARC) jack is a shared jack. This means that you can connect only one ARC or DVI device at a time.
FIND YOUR
USER GUIDE ONLINE!
We are going green so a copy of your
User Guide is not provided in the box
but is available online.
Go to www.insigniaproducts.com,
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click .
Stand column
Remote control and two AAA batteries
TV stand
Note: You can use the HDMI 1 (DVI+ARC) jack to connect a DVI device to your TV. Attach an HDMI-to-DVI adapter to the end of the HDMI cable. The adapter connects to the DVI device’s jack. See your online User Guide for more information about dierent types of HDMI (ARC , DVI or MHL).
Features
Front view
Remote control sensor
Power indicator
Back view
Using component cables (BETTER)
- OR -
Using an AV cable
(GOOD)
Note: Connect the yellow video cable
connector to the green Y/VIDEO jack on the back of your TV.
Component cable option
AV cable option
How do I connect my TV to an antenna or cable wall jack?
Note: The component video and AV
jacks are shared. This means you can connect only one component video or AV device at a time. We suggest using HDMI if your device supports it.
T4 screws (12 mm length) (3 pcs.)
T4 screw (14 mm length) (1 pc.)
Note: Images do not necessarily represent the exact design of your television.
OVER
Before using your new product, please read these instructions to prevent any damage.
32" LED TV I QUICK SETUP GUIDE I NS-32D201NA14
CONNECTING AUDIO DEVICES
How do I connect my TV to external speakers?
Using digital audio
Using analog audio
4
TURNING ON MY TV
O P TIC A L A UD IO IN
- OR -
Note: Refer to the instructions that came
with your speakers for more information.
Note: Refer to the instructions that came with your speakers for more information.
Using your remote control
H D MI2
MHL/ ACC
NORMAL: Original aspect ratio is preserved. Black bars are present if content is not widescreen (16:9).
ZOOM: Expands the image to ll the screen. The top and bottom of the image may be cropped.
WIDE: Displays content recorded in a 16:9 (wide-screen) aspect ratio.
CINEMA: Stretches the image at the edges, but keeps a clear image in the center.
INPUT
Opens the INPUT SOURCE list.
Power
Turns your TV on or o.
Numbers
Enter channel numbers and
parental control password.
Enters a digital sub-channel
number (for example 4.1).
Menu
Opens the on-screen menu.
ENTER
Conrms selections or changes
or opens a sub-menu.
EXIT
Closes the on-screen menu.
ASPECT
Changes how the picture is
displayed on the screen.
Volume
Changes the volume.
SLEEP
Sets the sleep timer.
FAVORITE
Opens the Favorite Channel List.
INlink Controls
Control HDMI-CEC devices
connected to your TV.
RECALL
Returns to the previous channel.
HOME
Opens the MHL device's home menu when an MHL device is plugged in.
Arrows
Navigate in on-screen menus.
INFO*
Opens a TV status banner.
CCD
Turns closed captioning on or o.
MUTE
Mutes the sound.
Channel
Changes the TV channels.
MTS/SAP
Analog TV – Cycles through mono, stereo, and secondary audio for analog programs. Digital TV – Selects the audio language from the current channel.
PICTURE
Selects the picture mode.
AUDIO
Selects the audio mode.
TM
One-year limited warranty
Visit www.insigniaproducts.com for details.
Need additional help?
See your online User Guide! This comprehensive guide includes everything from basic how-to steps to more advanced features. A copy of your User Guide is not provided in the box but is available online. Go to www.insigniaproducts.com, then click Support & Service. Enter your model number in the box under Manual, Firmware, Drivers & Product Information, then click . Check out our online community forum at www.insigniaproducts.com for helpful information from other Insignia TV owners.
We’re here for you
www.insigniaproducts.com For customer service, call: 877-467-4289 (U.S./Canada markets)
INSIGNIA is a registered trademark of BBY Solutions, Inc. Registered in some countries. Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richeld, MN 55423 U.S.A.
When can I turn on my TV?
The best time to turn on your TV is after you have attached the TV stand or wall-mounted your TV and connected all devices.
1 Plug the power cord into a power outlet.
2 Install the remote control batteries.
3 Press (power) on your remote control. 4 Follow the on-screen instructions.
AUTO: Automatically adjusts the image
based on the screen size and the TV program. Select this option if you are uncertain which aspect ratio to choose.
Note: Auto is only available when
Auto Aspect Ratio in the CHANNELS
menu is set to On.
I already have a universal remote control. How do I make it control this TV?
If you already have a universal remote control that you would like to program to work with your TV and don’t want to use the included Insignia remote control, see the table for common codes.
UNIVERSAL REMOTE TV CODES
CABLE BOX, SATELLITE BOX, OR OTHER SET-TOP BOX
Cablevision 068, 069, 078, 096, 100, 164, 168, 229, 026 Charter 2002, 1204, 1423, 1517, 0171, 1963, 0463, 1463, 0842, 1326, 167, 415, 424, 450, 456, 461,
507, 523, 567, 577, 586
Comcast 10171, 11204, 11326, 11463, 11517, 11641, 11780, 11785, 11892, 11963, 12002 Cox 1326, 1463 Direct TV 10171, 11204, 11326, 11517, 11564, 11641, 11963, 12002 Dish Network 720 Time Warner 400, 450, 461, 456, 10463, 1463, 0463 Tivo 0091 Verizon 0198, 0490
UNIVERSAL REMOTE CONTROLS
One for All 0054 Philips 0198, 0490 RCA 135 Sony 068, 069, 078, 096
©2013 BBY Solutions, Inc. All Rights Reserved 1-877-467-4289 www.insigniaproducts.com
For an up-to-date list of codes for other
cable providers and universal remote brands,
scan this QR code or visit
www.insigniaproducts.com/remotecodes
V1 ENGLISH 13-0648
Loading...