Insignia NS-32D200NA14 User Manual

User Guide

32" LED TV

NS-32D200NA14

Before using your new product, please read these instructions to prevent any damage.

Contents

CHILD SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

MHL™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

INlink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

DTS Sound™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installing the stand or wall-mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installing the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installing a wall-mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

TV components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

What connection should I use? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connecting a cable or satellite box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Using HDMI (best) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Using DVI (same as HDMI but requires an audio connection) . . . . . . . . . . . . . . . . . . . . . . . . 13

Using component video (better) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Using composite video (good) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Using coaxial (good) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Connecting an antenna or cable TV (no box) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Connecting a DVD or Blu-ray player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Using HDMI (best) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Using DVI (same as HDMI but requires an audio connection) . . . . . . . . . . . . . . . . . . . . . . . . 19

Using component video (better) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Using composite video (good) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Connecting an MHL-enabled device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Connecting a game console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Using HDMI (best) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Using component video (better) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Using composite video (good) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

www.insigniaproducts.com

Contents

Connecting a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Using VGA (most common) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Using HDMI (best) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Using DVI (same as HDMI but requires an audio connection) . . . . . . . . . . . . . . . . . . . . . . . . 28

Connecting a USB flash drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Connecting headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Connecting a basic home theater system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Using digital audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Using analog audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Connecting a home theater system with multiple devices . . . . . . . . . . . . . . . . . . . 33

Connecting power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Installing remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Aiming the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Turning on your TV for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Understanding the basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Turning your TV on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Selecting the video input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

On-screen menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Navigating the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Selecting a channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Viewing channel information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Adjusting the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Adjusting the TV picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Aspect ratio options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Setting the power on picture mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Adjusting the computer image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Adjusting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Adjusting sound settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Selecting the audio out mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Playing TV audio only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Changing channel settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Automatically scanning for channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Hiding channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Setting up a favorite channel list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Viewing a favorite channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Adding or changing a channel label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Checking the digital signal strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Automatically adjusting the aspect ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Setting parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Setting or changing the password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Locking control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Blocking unrated TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

www.insigniaproducts.com

iii

Setting parental control levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Downloading rating information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Using closed captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Turning closed captioning on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Selecting the analog closed captioning mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Selecting the digital closed captioning mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Customizing digital closed captioning settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Adjusting time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Setting the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Adjusting menu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Selecting the menu language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Labeling an input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Turning Input Sensor on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Using INlink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Turning INlink on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Turning Device Auto Power Off on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Turning TV Auto Power On on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Turning Audio Receiver on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Displaying a list of INlink-compatible (HDMI CEC) devices . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Waking INlink-compatible (HDMI CEC) devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Opening an INlink-compatible device’s root menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Contents

Using an MHL-enabled device or Roku Streaming Stick . . . . . . . . . . . . . . . . . . . . . . 62

Using an MHL-enabled device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Using a Roku Streaming Stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Using a USB flash drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Switching to USB mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Browsing photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Viewing favorite photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Viewing photos in a slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Customizing slideshow settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Maintaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Cleaning the TV cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Cleaning the TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Restoring settings to the defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Viewing system information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Video and audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

MHL-enabled device or Roku Streaming Stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

INlink (CEC-compatible) device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Programming universal remote controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Common universal remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

One-year limited warranty - Insignia Televisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

www.insigniaproducts.com

It makes a difference how and where you use

As you enjoy your new product, keep these

The issue

The home theater entertainment experience is a growing trend, and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturer’s recommendations. We and the consumer electronics industry are committed to making home entertainment enjoyable and safe.

TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and cause injury.

Tune into safety

•

One size of TV stand does not fit all. Use only a TV stand rated for the weight of your TV.

•

Carefully read and understand all enclosed instructions for proper use of this product.

•

Don’t let children climb on or play with entertainment system furniture and TVs.

•

Don’t place TVs on furniture that can easily be used as steps, such as a crate or chest of drawers.

•

Remember that children can become excited while watching a program, especially on a “larger-than-life” TV. Make sure that you place or install the TV where it cannot be pushed, pulled over, or knocked down.

•

Make sure that you route all cords and cables so that they cannot be pulled or grabbed by curious children.

CHILD SAFETY

your flat panel display

safety tips in mind

Wall mounting

If you decide to wall mount your TV, always remember:

•

One size of wall mount does not fit all. Use only a wall mount rated for the weight of your TV and that has been recommended by this TV manufacturer, listed in this manual, or otherwise listed by an independent laboratory as suitable for your TV.

•

Follow all instructions supplied by the TV and wall mount manufacturers.

•

If you have any doubts about your ability to safely wall mount your TV, get help from a professional installer.

•

Make sure that the wall where you are mounting the TV is appropriate. Some wall mounts are not designed to be mounted to walls backed with steel studs or cinder blocks. If you are unsure, ask a professional installer.

•

TVs can be heavy. At least two people are required for safe wall mount installation.

www.insigniaproducts.com

NS-32D200NA14

Important Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV.

1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

8 Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by

the manufacturer.

12 Use only with the cart, stand,

tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms

or when unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15 The wall plug is the disconnecting device. The

plug must remain readily operable.

16 Remote control batteries should not be exposed

to excessive heat such as sunshine, fire, or the like.

17 The apparatus should not be exposed to

dripping or splashing, and no objects filled with liquids, such as vases, should be placed on the apparatus.

WARN ING

Electric shock hazard

To reduce the risk of fire or electric shock, do not remove any cover or expose the device to rain or moisture. No user-serviceable parts are inside. Refer servicing to qualified service technicians.

Lightning

For added protection for your device receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the power outlet and disconnect any antenna or cable system. This helps prevent property damage and personal injury from lightning and power line surges.

Power lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, take extreme care to keep from touching such power lines or circuits as contact with them might be fatal.

Handling the LCD panel

• Your TV’s screen is made of glass. Do not drop your TV or hit, jolt, or press hard against the LCD panel. If the screen breaks, be careful of broken glass.

• If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation.

• If the liquid gets in your mouth, immediately gargle, rinse, and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.

Replacement parts

When replacement parts are required, make sure that the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, personal injury, or other hazards.

www.insigniaproducts.com

Safety check

After completing any service or repair to this device, ask the service technician to perform routine safety checks to determine that your TV is in correct operating condition.

Power source

Operate your TV only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult an electrician or your local power company.

Servicing

These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

CAUTION

Damage requiring service

Unplug this TV from the power outlet and refer servicing to qualified service personnel under the following conditions:

• When the power supply cord or plug is damaged or frayed.

• If liquid has been spilled or objects have fallen into your TV.

• If your TV has been exposed to rain or water.

• If your TV does not operate normally by following the operating instructions. Adjust only those controls covered by the operating instructions because incorrect adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore your TV to its normal operation.

• If your TV has been dropped or damaged in any way.

• When your TV exhibits a distinct change in performance.

Outdoor antenna grounding

If an outside antenna or cable system is connected to your TV, make sure that the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to correct grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of the antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Antenna lead-in wire

Grounding clamp

Antenna discharge

unit Grounding

conductors Ground clamps

Power service

grounding electrode system

Electric service

equipment

Note to CATV system installer

Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides guidance for correct grounding. Specifically, it states that the cable ground must be connected to the grounding system of the building as close to the point of cable entry as practical.

Condensation

Moisture will form on the TV if the TV is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, the TV's performance may be impaired. To prevent this, let the TV stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.

Condensation may also form during the summer if the TV is exposed to the breeze from an air conditioner. In such cases, change the location of the TV.

Mobile telephone warning

To avoid interference with your TV picture and sound, operating problems, or even damage, keep your cordless and cellular telephones away from the TV.

End of life directives

Your TV contains tin-lead solder containing a small amount of mercury. Disposal of this material may be regulated for environmental reasons. Your TV also contains material that can be recycled and reused. For disposal or recycling information, contact your local authorities to find a recycler in your area.

Non-active pixels

The LCD panel contains almost 3 million thin film transistors, which provide exceptionally sharp video quality. Occasionally, a few non-active pixels may appear on the screen as a fixed blue, green, or red point. These non-active pixels do not adversely affect the performance of your TV, and are not considered defects.

www.insigniaproducts.com

Insignia 32" LED TV

NS-32D200NA14 Insignia 32" LED TV

Introduction

Congratulations on your purchase of a high-quality Insignia product. Your NS-32D200NA14 represents the state of the art in LED TV design and is designed for reliable and trouble-free performance.

MHL™

Connect your MHL-enabled device, such as a cell phone or Roku Streaming Stick™, and view your device’s screen on your TV. Supports 1080p HD video and 5.1 digital surround sound playback from your mobile device. (Requires an MHL-enabled phone or tablet and an MHL cable.) (See page 22 for connection instructions.)

INlink

Enjoy the benefit of having HDMI CEC compatible products plug and play! No setup is needed! CEC technology lets different components discover and communicate with each other. (See page 59 for instructions on how to use INlink.)

DTS Sound™

DTS Sound delivers clear, crisp, and natural sound while providing deep enveloping bass.

www.insigniaproducts.com

Insignia 32" LED TV

Installing the stand or wall-mount bracket

Notes

• If you plan to wall-mount your TV, do not install the stand.

• Store the stand and stand screws in case you decide to use the stand in the future.

Installing the stand

To install the stand:

1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and

scratches.

2 Secure the TV stand to your TV with the three provided screws.

Screw type Screw length # of screws

M4 18 mm 3

Front of TV stand

www.insigniaproducts.com

Installing a wall-mount bracket

Warning

This TV is intended to be supported by a UL Listed wall mount bracket with suitable weight/load. (See “Miscellaneous” on page 75.)

To attach your TV to a wall-mount bracket:

1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and

scratches.

NS-32D200NA14 Insignia 32" LED TV

2 If the stand is attached, remove the three screws that secure the TV stand to your TV, then remove the TV stand.

www.insigniaproducts.com

Insignia 32" LED TV

3 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions

that came with the wall-mount bracket for information about how to correctly hang your TV.

Notes

• The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths.

• The mounting holes on the back of your TV take type M4 screws.

3.94 in. (100 mm)

Wall-mount

brackets

3.94 in. (100 mm)

www.insigniaproducts.com

NS-32D200NA14 Insignia 32" LED TV

TV components

Package contents

•32" LED TV

• Remote control and batteries (2 AAA)

• TV stand and screws (3)

•Power cord

• Quick Setup Guide

• Important Information

Front

# Item Description

The remote control sensor receives signals from the remote

Remote control

sensor and Power indicator

INPUT

VOL+/VOL–

CH /CH

POWER

control. Do not block. The power indicator:

• Turns off when your TV is on.

•Lights red when your TV is off (standby mode).

Press to open the on-screen menu. For more information, see “Navigating the menus” on page 39.

Press one or more times to select the video input source your want, then wait a few seconds. Your TV switches to the source you selected. For more information, see “Selecting the video input

source” on page 38.

In menu mode, press to confirm selections.

Press to increase or decrease the volume.

Press to go to the next or previous channel in the channel list. For more information, see “Selecting

a channel” on page 40.

Press to turn your TV on or off (standby mode).

Warning: When your TV is off, power still flows through it. To completely disconnect power, unplug the power cord.

Side

# Item Description

Connect a USB flash drive to this jack to view compatible JPEG

USB

/AUDIO OUT

HDMI 1/

ARC/DVI

HDMI 2/MHL

picture files. For more information, see “Connecting a USB flash drive” on page 29 and “Using a USB flash

drive” on page 64.

Connect headphones, an analog audio amplifier, a home theater system, or a sound bar to this jack. For more information, see “Using

analog audio” on page 32.

Connect an HDMI device to this jack. For more information, see “Using HDMI (best)” on pages 12,

18, 23, or 27.

OR Connect the video for a DVI device

to this jack. For more information, see “Using DVI (same as HDMI but

requires an audio connection)” on

pages 13, 19 or 28. OR Connect a home theater to this jack.

Connect an HDMI device to this jack. For more information, see “Using HDMI (best)” on pages 12,

18, 23, or 27.

OR Connect an MHL-enabled device,

such as a cell phone, to this jack to view pictures and videos stored on the device. For more information, see “Connecting an MHL-enabled

device” on page 22 and “Using an MHL-enabled device or Roku Streaming Stick” on page 62.

www.insigniaproducts.com

Insignia 32" LED TV

Back

# Item Description

Power connector

Plug the power cord into this connector.

Connect the audio for a component video device to these jacks. For more information, see “Using component video (better)” on page 14, 20, or 24.

L and R (audio)

OR Connect the audio for a

composite video device to these jacks. For more information, see “Using composite video (good)” on page 15, 21, or 25.

The COMPONENT/AV Y/VIDEO jack works as one of the three component video jacks or as a composite video jack.

Connect the video for a

COMPONENT/AV Y/VIDEO, P

OR COMPONENT/AV

Y/VIDEO

component video device to these jacks. For more information, see

, P

“Using component video (better)” on page 14, 20, or 24.

OR Connect the video for a

composite video device to the COMPONENT/AV Y/VIDEO jack. For more information, see “Using

composite video (good)” on

page 15, 21, or 25. Connect a digital audio amplifier

or home theater system to this

DIGITAL OUTPUT

(coaxial)

jack to listen to TV audio through the amplifier speakers. For more information, see “Using digital

audio” on page 31.

Connect an antenna or cable TV

ANT/CABLE IN

to this jack. For more information, see “Connecting an antenna or

cable TV (no box)” on page 17.

Connect the audio for a computer to this jack. For more information see “Using VGA (most common)” on page 26.

VGA/

DVI AUDIO IN

OR Connect the audio for a DVI

device to this jack. For more information see, “Using DVI (same

as HDMI but requires an audio connection)” on pages 13, 19,

or 28. Connect the video (VGA) for a

VGA

computer to this jack. For more information, see “Using VGA

(most common)” on page 26.

www.insigniaproducts.com

NS-32D200NA14 Insignia 32" LED TV

Remote control

# Button Description

Press to turn your TV on or off (standby mode).

(power)

Numbers

ENTER

MENU Press to open the on-screen menu.

EXIT Press to close the on-screen menu.

Warn ing: When your TV is off, power still flows through it. To disconnect power, unplug the power cord.

Press to enter channel numbers and the parental control password.

Press to enter a digital sub-channel number. For more information, see “Selecting a channel” on page 40.

Press to confirm selections or changes or to open sub-menus.

# Button Description

FAVOR ITE

INlink Controls

INPUT

(return) In TV mode, press to return to the previous channel.

S T W X

(home)

INFO*

CCD

MUTE

CH /CH

Press to open the Favo rite channel list. For more information , see “Setting up a favorite channel list” on page 47 and “Viewing a favorite channel” on page 47.

Press to control INlink-compatible (HDMI CEC) devices. For more information, see “Us ing INlink” on page 59.

Press to open the INPUT SOURCE list, press S or T on the remote control to select the video input source, then press ENTER. For more information, see “Selecting the video input source” on page 38.

Press to nav igate in on-screen menus and to adjust settings.

Press to open the MHL device’s home menu when an MHL device is plugged in.

Press to display TV status information, such as the channel number, channel name (if available), o r signal source. For more information, see “Viewing channel

informati on” on page 40.

Press to turn close d capti oning o n or of f. You can s elect CC Of f, CC On, or CC O n when mute. For more information, see “Turning closed captioning on or off” on page 53.

Press to mute the sound. Press again to restore the sound.

Press to change TV channels. For more information, see “Selecting a channel” on page 40.

Press to select the audio mode for an analog program. You can select:

• Mo no—Select this option if there is noise or static on weak stereo broadcasts.

MTS/SAP

PICTURE

AUDIO

• Stereo—Select this option for programs broadcast in stereo.

• SAP—Select this option to listen to a secondary audio program, if available.

OR Press to select the audio language for a digital

program, if alternate languages are available.

Press to select the picture mode. You can select

Energy Savings, Standard, Vivid, Movie, or Custom. For more information, see “Picture Mode” in

“Adjusting the TV picture” on page 40.

Press to select the sound mode. You can select Standard, Theater, Music, News, or Custom. For more information, see “S ound Mode” in “Adjusting

sound settings” on page 43.

ASPECT

VOL+/– Press to increase or decrease the volume.

SLEEP

Press to change how the picture looks on the screen (aspect ratio). For more information, see “Aspect ratio

options” on page 41.

Press to set the sleep timer. You can select Off, 5, 10, 15, 30, 60, 90, 120, 180, or 240 minutes. For more information, see “Setting the sleep timer” on page 57.

www.insigniaproducts.com

Insignia 32" LED TV

What connection should I use?

Your TV has several connection types for connecting devices to your TV.

For the best video quality, you should connect a device to the best available connection.

Use the following tables to identify cables:

Video quality

Best (use this

if your devices

have HDMI)

Better than

composite or

coaxial

Connection type and jack

HDMI

video/audio

Component

video (requires

an audio

connection)

Cable connector

Connection type and jack

Coaxial digital

audio

Analog audio

input

Analog audio

output

Cable connectors

Better than

coaxial

Good

Composite video

(requires an

audio

connection)

Coaxial

video/audio

VGA (computer)

video and audio

You can use the HDMI 1/ARC/DVI jack on your TV to connect a DVI device to your TV. You need to attach an HDMI-to-DVI adapter to the end of the HDMI cable that connects to the DVI device.

Cautions

• Check the jacks for position and type before making any connections.

• Loose connections can result in image or color problems. Make sure that all connections are tight and secure.

• The external audio/video equipment shown may be different from your equipment. If you have questions, refer to the documentation that came with your equipment.

• Always unplug the power cord when connecting external equipment.

www.insigniaproducts.com

NS-32D200NA14 Insignia 32" LED TV

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. For more information, see “What connection should I use?” on page 11.

Using HDMI (best)

On your TV

HDMI cable

connector

HDMI jack

To connect a cable or satellite box using HDMI:

1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT

jack on the cable or satellite box.

4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Press INPUT to open the INPUT SOURCE list. 6 Press

or T to highlight HDMI 1 or HDMI 2, then press ENTER.

Side of TV

Cable or

satellite box

HDMI cable

Note

An HDMI cable carries both audio and video. You do not need to use any audio cables.

www.insigniaproducts.com

Insignia 32" LED TV

Using DVI (same as HDMI but requires an audio connection)

Note

You must use the HDMI1/ARC/DVI jack to connect a DVD or Blu-ray player using DVI. If you use another HDMI jack, you will not hear sound from the TV speakers.

Side of TV

On your TV

Cable or

satellite box

HDMI cable

connector

HDMI 1/

ARC/DVI

jack

To connect a cable or satellite box using DVI:

1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the

adapter to the DVI OUT jack on the cable or satellite box. 4 Connect the other end of the cable to the HDMI 1/ARC/DVI jack on the side of your TV. 5 Connect a 3.5mm audio cable (not provided) to the VGA/DVI AUDIO IN jack on the back of your TV and to the

AUDIO OUT jacks on the cable or satellite box.

3.5mm audio connector

VGA/DVI

AUDIO IN

jack

Back of TV

Note

When you connect the audio using the VGA/DVI AUDIO IN jack, the audio output is analog.

HDMI cable with

HDMI-DVI adapter

3.5mm audio cable

6 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 7 Press INPUT to open the INPUT SOURCE list. 8 Press

or T to select HDMI 1, then press ENTER.

www.insigniaproducts.com

Using component video (better)

Note

Cables are often color-coded to match color-coded jacks.

NS-32D200NA14 Insignia 32" LED TV

On your TV

Cable or

satellite box

Component

video cable

connectors

Analog

audio cable

connector

Audio cable

Component video cable

Component

video jacks

Analog

audio jacks

Back of TV

To connect a cable or satellite box using component video:

1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a component video cable (not provided) to the COMPONENT/AV Y/VIDEO, P

, and PR video jacks on

the back of your TV and the component video out jacks on the cable or satellite box.

4 Connect an audio cable (not provided) to the L and R audio jacks on the back of your TV and to the audio out

jacks on the cable or satellite TV box.

Notes

•The COMPONENT/AV Y/VIDEO, P

, and PR video jacks (used to connect a component device) share the L and R audio jacks with the COMPONENT/AV Y/VIDEO jack (used to connect a composite device).

• When you connect the audio using the L and R audio jacks, the audio output is analog.

5 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 6 Press INPUT to open the INPUT SOURCE list. 7 Press

or T to select Component/AV, then press ENTER.

www.insigniaproducts.com

Insignia 32" LED TV

Using composite video (good)

Notes

• Cables are often color-coded to match color-coded jacks.

• The yellow video connector on the AV cable connects to the green COMPONENT/AV Y/VIDEO jack.

On your TV

Composite

video cable

connector

Composite

video jack

To connect a cable or satellite box using composite video:

1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an AV cable (not provided) to the COMPONENT/AV Y/VIDEO jack and L and R audio jacks on the back

of your TV and to the composite video and audio out jacks on the cable or satellite box.

Analog audio

cable

connectors

AV cable (composite video cable)

Analog

audio jacks

Back of TV

Cable or

satellite box

Notes

•The COMPONENT/AV Y/VIDEO, P a component device) share the L and R audio jacks with the COMPONENT/AV Y/VIDEO jack (used to connect a composite device).

• When you connect the audio using the L and R audio jacks, the audio output is analog.

4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Press INPUT to open the INPUT SOURCE list. 6 Press

or T to select Component/AV, then press ENTER.

, and PR video jacks (used to connect

www.insigniaproducts.com

Using coaxial (good)

On your TV

Coaxial cable

connector

ANT/CABLE IN

jack

NS-32D200NA14 Insignia 32" LED TV

Cable or

satellite box

Back of TV

To connect a cable or satellite box using coaxial:

1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the back of your TV and to the coaxial out

jack on the cable or satellite box.

4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Press INPUT to open the INPUT SOURCE list. 6 Press 7 If you cannot tune to channels you know exist, scan for channels. See “Automatically scanning for channels” on

page 45.

or T to highlight TV, then press ENTER.

Notes

• Use a coaxial cable to eliminate interference and noise from radio waves.

• Do not bundle the coaxial cable with the power cord or other cables.

Coaxial cable

www.insigniaproducts.com

Insignia 32" LED TV

Connecting an antenna or cable TV (no box)

On your TV

Antenna or cable TV

(no box)

Coaxial cable

connector

ANT/CABLE IN

jack

Back of TV

To connect an antenna or cable TV (no box):

1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off. 2 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the back of your TV and to the antenna or

cable TV wall jack.

3 Plug your TV’s power cord into a power outlet, then turn on your TV. 4 Press INPUT to open the INPUT SOURCE list. 5 Press 6 If you cannot tune to channels you know exist, scan for channels. See “Automatically scanning for channels” on

page 45.

or T to highlight TV, then press ENTER.

Coaxial cable

Notes

• Use a coaxial cable to eliminate interference and noise from radio waves.

• Do not bundle the coaxial cable with the power cord or other cables.

• If the antenna is not installed correctly, contact qualified service personnel to correct the problem.

• If the signal level for a channel is weak, the picture may be distorted. Adjust the antenna or use a highly directional outdoor or set-top antenna with a built-in amplifier.

• If the picture quality is good on some channels and poor on others, the problem may be caused by a poor or weak signal from the broadcaster or cable TV provider.

• If you connect to cable or satellite TV without a set-top box and experience poor picture quality, you may need to install a set-top box to improve signal reception and picture quality. Contact your cable or satellite TV provider about upgrading to a set-top box.

• Many high-definition (HD) channels upscale standard-definition (SD) content. The picture displayed on your TV is still displayed as SD, thus the picture quality will not be as clear or crisp as it would be if the content was originally recorded in HD.

www.insigniaproducts.com

NS-32D200NA14 Insignia 32" LED TV

Connecting a DVD or Blu-ray player

Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best connection type available. For more information, see “What connection should I use?” on page 11.

Using HDMI (best)

Side of TV

On your TV

HDMI cable

connector

HDMI jack

To connect a DVD or Blu-ray player using HDMI:

1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT

jack on the DVD or Blu-ray player.

3 Plug your TV’s power cord into a power outlet, then turn on your TV. 4 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the

documentation that came with the player.

5 Press INPUT to open the INPUT SOURCE list. 6 Press

or T to highlight HDMI 1 or HDMI 2, then press ENTER.

DVD or Blu-ray player

HDMI cable

Note

An HDMI cable carries both audio and video. You do not need to use any audio cables.

www.insigniaproducts.com

Insignia 32" LED TV

Using DVI (same as HDMI but requires an audio connection)

Note

You must use the HDMI1/ARC/DVI jack to connect a DVD or Blu-ray player using DVI. If you use another HDMI jack, you will not hear sound from the TV speakers.

Side of TV

On your TV

DVD or Blu-ray player

HDMI cable

connector

HDMI1/

ARC/DVI

jack

To connect a DVD or Blu-ray player using DVI:

1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the

adapter to the DVI OUT jack on the DVD or Blu-ray player. 3 Connect the other end of the cable to the HDMI1/ARC/DVI jack on the side of your TV. 4 Connect a 3.5mm audio cable (not provided) to the VGA/DVI AUDIO IN jack on the back of your TV and to the

AUDIO OUT jacks on the DVD or Blu-ray player.

3.5mm audio cable

connector

VGA/DVI

AUDIO IN

jack

Back of TV

Note

When you connect the audio using the VGA/DVI AUDIO IN jack, the audio output is analog.

HDMI cable with

HDMI-DVI adapter

3.5mm audio cable

5 Plug your TV’s power cord into a power outlet, then turn on your TV. 6 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the

documentation that came with the player.

7 Press INPUT to open the INPUT SOURCE list. 8 Press

or T to select HDMI 1, then press ENTER.

www.insigniaproducts.com

Using component video (better)

Note

Cables are often color-coded to match color-coded jacks.

On your TV

NS-32D200NA14 Insignia 32" LED TV

DVD or Blu-ray player

Component

video cable

connectors

Analog audio

cable

connectors

Audio cable

Component video cable

Component

video jacks

Analog

audio jacks

Back of TV

To connect a DVD or Blu-ray player using component video:

1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect a component video cable (not provided) to the COMPONENT/AV Y/VIDEO, P

, and PR jacks on the

back of your TV and to the COMPONENT OUT jacks on the DVD or Blu-ray player.

3 Connect an audio cable (not provided) to the COMPONENT/AV L/R audio jacks on the back of your TV and to

the L/R AUDIO OUT jacks on the DVD or Blu-ray player.

Notes

•The COMPONENT/AV Y/VIDEO, P

, and PR video jacks (used to connect a component device) share the L and R audio jacks with the COMPONENT/AV Y/VIDEO jack (used to connect a composite device).

• When you connect the audio using the L and R audio jacks, the audio output is analog.

4 Plug your TV’s power cord into a power outlet, then turn on your TV. 5 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the

documentation that came with the player.

6 Press INPUT to open the INPUT SOURCE list. 7 Press

or T to select Component/AV, then press ENTER.

www.insigniaproducts.com

Insignia 32" LED TV

Using composite video (good)

Notes

• Cables are often color-coded to match color-coded jacks.

• The yellow video connector on the AV cable connects to the green COMPONENT/AV Y/VIDEO jack.

On your TV

DVD or Blu-ray player

Composite

video cable

connector

Composite

video jack

To connect a DVD or Blu-ray player using composite video:

1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an AV cable (not provided) to the COMPONENT/AV Y/VIDEO jack and L and R audio jacks on the back

of your TV and to the AV OUT jacks on the DVD or Blu-ray player.

Analog audio

cable

connectors

AV cable (composite video cable)

Analog

audio jacks

Back of TV

Notes

•The COMPONENT/AV Y/VIDEO, P a component device) share the L and R audio jacks with the COMPONENT/AV Y/VIDEO jack (used to connect a composite device).

• When you connect the audio using the L and R audio jacks, the audio output is analog.

, and PR video jacks (used to connect

3 Plug your TV’s power cord into a power outlet, then turn on your TV. 4 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the

documentation that came with the player.

5 Press INPUT to open the INPUT SOURCE list. 6 Press

or T to select Component/AV, then press ENTER.

www.insigniaproducts.com

+ 58 hidden pages