Congratulations on your purchase of a high-quality
Insignia product. Your NS-2BRDVD represents the
state of the art in Blu-ray Disc player design, and is
designed for reliable and trouble-free performance.
Safety information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert you to the presence of uninsulated
dangerous voltage within your player’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended
to alert you to the presence of important operating and
maintenance (servicing) instructions in the literature that came
with your player.
This symbol is the symbol for CLASS II (Double Insulation).
Warning
Your player employs a laser system.
Use of controls, adjustments, or the
performance of procedures other
than those specified may result in
hazardous radiation exposure.
Visible laser radiation is present when open and
interlocks defeated. Do not stare into beam.
Warning
When replacing your player’s plug or power cord, the
replacement must be exactly the same or one
recommended by the manufacturer. Using another
type of plug or power cord may result in damage to
your player or a fire.
This symbol indicates that your player should not be disposed
with other household wastes throughout the EU. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To return your player,
use the return and collection systems or contact the retailer
where the product was purchased. The retailer can recycle your
player correctly.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use your player near water.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
heat-generating devices (including amplifiers)
that produce heat.
9 Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs and convenience
receptacles and the point where they exit from
your player.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer or sold with
your player. When a cart is used,
use caution when moving the cart
and player combination to avoid
injury from tip-over.
13 Unplug your player during lightning storms or
when unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when your player has been
damaged in any way, such as when the
power-supply cord or plug is damaged, when
liquid has been spilled or objects have fallen
into your player, when your player has been
exposed to rain or moisture, or when your
player does not operate normally or has been
dropped.
15 To reduce the risk of fire or electric shock, do not
expose your player to rain or moisture. Your
player should not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases, shall be placed on your player.
16 The main power plug is the disconnect device
and should easy to access. Make sure that the
plug is easy to remove.
17 Make sure that you allow at least 4 inches
(10 cm) of space on all sides of your player to
allow for ventilation.
www.insigniaproducts.com
1
NS-2BRDVD Insignia NS-2BRDVD Blu-ray Disc Player
18 Do not install your player in a confined space,
such as a bookcase without allowing enough
space for ventilation. Do not cover the
ventilation openings with items such as
newspaper, tablecloths, or curtains.
19 Do not place items with on flames, such as
candles, on your player.
20 Dispose of batteries according to local
hazardous waste regulations.
21 Use your player in mild climates. Excessive heat
or cold can damage your player.
22 Use of controls or adjustments other than these
specified in this guide may result in hazardous
radiation exposure.
Features
• Full, high-definition video playback at up to
1080p resolution for an amazing viewing
experience
• Upconversion of standard-definition DVDs for
enhanced picture quality at up to 1080p over an
HDMI connection.
• Rich multi-channel surround sound
• Easy HDTV connection using a single HDMI cable
(cable not included)
• Multiple outputs for connecting your home
theater system or amplifier
• PIP functionality that lets you display primary and
secondary video at the same time (if available on
the Blu-ray Disc)
• Pop-up menu display without interrupting
playback (if available on the Blu-ray Disc)
• HDMI 1080p output (Blu-ray Disc only) that
provides smooth playback of video with a frame
rate of 60 frames per second (TV must be
connected with an HDMI cable and be compatible
with 1080p 60 frame).
USB mass storage support
• Compatible with USB 1.1 and 2.0 devices
• Supports external USB mass storage for FAT16 and
FAT32 de v ic e s)
• Supports single partition only
• Supports USB hard drives (externally powered
only)
• Includes BD-Live VFS extension using a USB mass
storage device
• Includes navigation support for WMA, JPEG, and
MP3 content on a USB device
• System upgradable from a USB device
Package contents
• Blu-ray DVD player
• Remote control
• Batteries AAA (2)
•AV cable
•User Guide
Front
# ItemDescription
1
Disc tray
2
VFD screen
3
Remote control sensor
4
(open/close)
5
(standby/on)
6
(previous)
7
(stop)
8
(next)
9
(play/pause)
Insert a disc with the label side up into this tray. To
open or close the tray, press OPEN/CLOSE.
Displays status information, such as playing time or
current time.
Receives signals from the remote control. Do not block.
Press to open or close the disc tray.
Press to turn on your player or put your player is
standby mode. When your player is in standby mode,
power is still entering your player. To disconnect
power, unplug the power cord.
Press to go to the previous title, chapter, or track.
Press to stop playback. If you press this button once
then press , playback resumes playback from
where it stopped. If you press this button twice then
press , playback begins at the beginning of the
disc.
During BD JAVA playback, press (stop), then press
(play/pause). Playback begins at the beginning of
the disc.
Press to go to the next title, chapter, or track.
Press to start or pause playback.
2
www.insigniaproducts.com
Insignia NS-2BRDVD Blu-ray Disc Player
BackRemote control
# ItemDescription
1
Power cord
Y, CB/PB, CR/PR VIDEO
2
OUT (component)
3
VIDEO OUT
4
L/R AUDIO OUT
COAXIAL DIGITAL AUDIO
5
OUT
OPTICAL DIGITAL AUDIO
6
OUT
7
HDMI
8
ETHERNET
9
USBConnect a USB drive to this jack.
Plug this cord into a power outlet.
Connect a component TV to these jacks.
Connect a standard AV TV to this jack.
Connect the L/R audio jacks on a TV or sound system to
these jacks.
Connect a sound system that has a coaxial audio jack
to this jack.
Connect a sound system that has an optical audio jack
to this jack.
Connect the HDMI input jack on the TV to this jack. The
HDMI cable carries both video and sound. If you
connect a device to this jack, you do not need to make
any audio connections.
Use this jack to connect your player to the Internet to
download BD-Live information.
1
STANDBY/ON
2
Number buttons
3
SEARCH
4
5
6
ZOOM
(fast reverse)
(fast forward)
Press to turn on your player or put your player in
standby mode. When your player is in standby mode,
power is still entering your player. To disconnect
power, unplug the power cord.
In playback mode, press SEARCH, then press the
number buttons to enter a title, chapter, track, or time.
In menu mode, press to enter the parental code
password.
Press to search for a title, chapter, or specific time on a
disc. For more information, see “Searching for a title,
chapter, or elapsed time” on page 8.
Press to fast reverse. Each time you press this button,
the fast-reverse speed increase from Fast X2, Fast X4,
Fast X8, Fast X16, Fast X32, Fast X64, to Fast X128.
Press PLAY/PAUSE to resume normal playback.
Press to fast forward. Each time you press this button,
the fast-forward speed increases from Fast X2, Fast X4,
Fast X8, Fast X16, Fast X32, Fast X64, to Fast X128.
Press PLAY/PAUSE to resume normal playback.
Press to zoom in on a JPEG picture or video. Each time
you press this button, the magnification level changes.
This button is only used for JPEG discs and DVD discs.
www.insigniaproducts.com
3
NS-2BRDVD Insignia NS-2BRDVD Blu-ray Disc Player
7
(stop)
8
REPEAT
9
RESOLUTION
10
A-B
11
DISC MENU
12
13
ENTER
14
SETUP
15
SUBTITLE
A (red), B (green),
16
C (yellow), D (blue)
17
PIP
18
OPEN/CLOSE
19
CLEAR
20
(next)
21
(previous)
22
23
(play/pause)
24
ANGLE
25
DISPLAY
POPUP MENU/
26
TITLE MENU
27
RETURN
(step)
Press to stop playback.
If you press th is button once then press
PLAY/PAUSE, playback resumes from where it
stopped. If you press this button twice then press
PLAY/PAUSE, playback begins at the beginning
of the disc.
During BD JAVA playback, press (stop), then press
(play/pause). Playback begins at the beginning of
the disc.
Press to repeat the current title, chapter, track, or
repeat all. For more information, see “Repeating a title
or chapter” on page 8.
Press to select the video resolution. For more
information, see “Selecting the video output
resolution” on page 9.
Press to create a playback loop. For more information,
see “Creating a playback loop” on page 8.
During MP3 or WMA playback, press to open a menu
that lets you control playback. For more information,
see “Playing MP3 or WMA files” on page 9.
During JPEG playback, press to open a menu that lets
you control playback. For more information, see
“Viewing JPEG files” on page 10.
If a disc menu opens when playing a Blu-ray Disc or
DVD, press to select a menu option, then press ENTER.
During MP3, WMA, or JPEG playback, press to select a
file on the popup menu, then press ENTER.
When a menu is open, press to select an option, then
press ENTER.
Press to confirm selection in a menu.
Press to open the setup menu where you can adjust
options.
Press to select a subtitle language or to turn subtitles
off. For more information, see “Using subtitles” on
page 8.
When playing a Blu-ray Disc that had a Java™
application, press to control playback. For more
information, see the documentation that came with
the Blu-ray Disc.
Press to turn PIP (picture-in-picture) mode on or off.
For more information, see “Using PIP
(picture-in-picture) mode” on page 9.
Press to open or close the disc tray.
Press to clear an input error.
Press to go to the next title, chapter, or track.
Press to go to the previous title, chapter, or track.
Press to advance one frame at a time. Press
PLAY/PAUSE to resume normal playback.
Press to start or pause playback.
Press to select a viewing angle if multiple angles are
available on the disc. For more information, see
“Selecting a viewing angle” on page 8.
Press to display disc information, such as “Title
Elapsed,” “Title Remain,” “Chapter Elapsed,” “Chapter
Remain,” and “Display Off.”
Each time you press this button the display changes.
During Blu-ray Disc playback, press to open a menu
that lets you control Blu-ray Disc playback.
During DVD playback, press to open the DVD menu (if
availab le).
During MP3, WMA, or JPEG playback, press to return to
the previous menu.
Press to select the audio channel. For more
28
AUDIO
29
SECONDARY AUDIO
information, see “Selecting the audio language” on
page 8.
In PIP mode, press to turn the audio for the secondary
video on or off. For more information , see “Using PIP
(picture-in-picture) mode” on page 9.
Remote control range
23 feet (7 m)
Notes
• Do not let strong light shine on the remote
control sensor on the front of your player.
Strong light can interfere with signal reception.
• Point the remote control at the remote control
sensor.
• Do not drop the remote control or expose it to
shocks.
• Do not leave the remote control in a hot or
humid place.
• Do not spill water or put anything wet on the
remote control.
• Do not open the remote control except to install
batteries in the battery compartment.
Setting up your player
Installing remote control batteries
To install remote control batteries:
1 Remove the battery compartment cover.
4
www.insigniaproducts.com
Insignia NS-2BRDVD Blu-ray Disc Player
2 Insert two AAA batteries into the battery
compartment. Make sure that the + and –
symbols on the batteries match the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.
Notes
• Make sure that you insert the batteries correctly.
• Do not heat, open, or short-circuit batteries.
• Do not throw batteries into a fire.
• Do not mix different types of batteries or mix
old and new batteries.
• Do not try to recharge non-rechargable
batteries.
• If the remote control does not function correctly
or if the operating range becomes reduced,
replace the batteries.
Connecting an HDMI TV
HDMI provides the best video and audio. An HDMI
cable carries both video and audio. You do not need
to make an audio connection.
To connect an HDMI device:
• Connect an HDMI cable (not included) to the
HDMI jack on the back of your player, then
connect the other end of the cable to the HDMI IN jack on the TV.
Back of player
Connecting a component TV (no sound
system)
A component video connection is better than a
standard AV connection.
To connect a component TV (no sound system):
1 Connect a component video cable (not
provided) to the Y, CB/PB, CR/PR VIDEO OUT
jacks on the back of your player, then connect
the other end of the cable to the corresponding
jacks on the component TV.
Standard audio cable
Back of player
Component v ideo cable
2 Connect a standard audio cable (not provided)
to the L and R AUDIO OUT jacks on the back of
your player, then connect the other end of the
cable to the corresponding AUDIO IN jacks on
the component TV.
Connecting a component TV and sound
system using standard audio
To connect a component TV and sound system
using standard audio:
1 Connect a component video cable (not
provided) to the Y, CB/PB, CR/PR VIDEO OUT
jacks on the back of your player, then connect
the other end of the cable to the corresponding
jacks on the component TV.
HDMI cable
Note
The HDMI jack o n your player is the only j ack ca pable
of outputting 1080i/1080p video and the highest
definition audio codecs.
If you want to connect a sound system using HDMI,
connect the HDMI jack on your player to the HDMI IN jack on the sound system. Then use another HDMI
cable to connect the HDMI OUT jack on the sound
system to the HDMI IN jack on the HDMI video
device.
www.insigniaproducts.com
Component cableStandard audio cable
2 Connect a standard audio cable (not provided)
to the L and R AUDIO OUT jacks on the back of
your TV, then connect the other end of the cable
to the corresponding AUDIO IN jacks on the
sound system.
5
NS-2BRDVD Insignia NS-2BRDVD Blu-ray Disc Player
Connecting a component TV and sound
system using digital audio
Your player has two digital audio jacks: coaxial and
optical. You connect your digital sound system to
one of these jacks. To determine which type of
digital jack your sound system has, see the
documentation that came with your sound system.
To connect a component TV and sound system
using digital audio:
1 Connect a component video cable (not
provided) to the Y, CB/PB, CR/PR VIDEO OUT
jacks on the back of your player, then connect
the other end of the cable to the corresponding
jacks on the component TV.
Coaxial cabl e
Component cab le
OR
Optical cable
2 Connect a coaxial digital audio cable (not
provided) to the COAXIAL DIGITAL AUDIO OUT
jack on the back of your player, then connect
the other end of the cable to the COAXIAL IN
jack on the sound system.
Or
Connect an optical digital audio cable (not
included) to the OPTICAL DIGITAL OUT jack on
the back of your player, then connect the other
end of the cable to the OPTICAL IN jack on the
sound system.
Connecting a standard AV TV
A standard AV connection provides a good video
connection.
To connect a standard AV TV:
• Connect a standard AV cable (provided) to the
VIDEO OUT and L and RAUDIO OUT jacks on the
back of your player, then connect the other end of
the cable to the corresponding AV IN jacks on the
standard TV.
Back of player
Using your player
All actions in this guide are based on using the
remote control unless otherwise indicated.
Playable discs
Disc typeLogoDisc typeLogo
Blu-ray DiscAudio CDs (CDDA)
DVD-video
(DVD-ROM
DVD-RAMMP3/WMA/
DVD-RWDVD-R
Notes
• Writeable DVDs (DVD-RAM, DVD-RW, DVD-R)
must be finalized ( VR mode only).
• Your player supports discs that are compatible
with DVD-RAM Standard Version 2.0.
• Playback may not work for some types of discs,
or when specific operations, such as changing
the angle or aspect ratio, are being performed.
Information about the discs is on the disc or disc
packaging.
• Do not let the disc become dirty or scratched.
Fingerprints, dirt, dust, scratches, or deposits of
cigarette smoke on the recording surface may
make it impossible to use the disc for playback.
• Your player can play CD-Rs, CD-RWs, DVD-RAMs,
DVD-RWs, and DVD-Rs recorded with UDF or
ISO9660 format.
• Your player can play MP3 files. MP3 files must
have an .mp3 file extension and WMA files must
have a .wmp file extension, or your player may
not play them correctly.
• High bit-rate or variable bit-rate .mp3 and .wma
files may not play back correctly.
• JPEG picture files must have a .jpeg or .jpg file
extension, or your player may not play them
correctly.
Region codes
Blu-ray Discs and DVDs have region codes to help
prevent illegal distribution of discs. If the disc’s
region code does not match your player’s region
code, the disc will not play.
Your player’s region code is displayed on the back
of your player. The disc’s region code is displayed on
the disc or disc packaging.
DTS-CD
JPEG/Data CD
AV Ca ble
6
www.insigniaproducts.com
Insignia NS-2BRDVD Blu-ray Disc Player
Turning your player on or putting it into
standby mode
Note
When your player is in standby mode, power is still
entering your player. To disconnect power, unplug
the power cord.
To turn your player on or put it into standby
mode:
1 Plug the power cord into a power outlet.
2 Make sure that the TV is turned on.
3 Press STANDBY/ON.
Using Media Launcher
When you connect a USB drive and turn on your
player, the Media Launcher menu appears at the
top of the screen. On the Media Launcher menu,
you can select the optical disc tray or a connected
USB device for playback.
Note
At least one available media type must be in the
player for Media Launcher to appear.
To select the playback source:
1 Turn on your player. Media Launcher opens.
3 If the USB Function Select menu opens, press
or to select an option, then press ENTER.
You can select:
• File Playback—Opens the DISC NAVIGATOR MENU and lets you select the type of files you
want to play. See Step 3.
• BDLive Storage—Uses the USB drive for
Blu-ray’s virtual file system (VFS).
• Go Back—Returns to the Media Launcher
menu.
2 Press or to select Optical Disc or USB, then
press ENTER.
Note
•To select Optical Disc, a disc must be in the disc
tray. To select USB, a USB drive must be
connected to your player.
• If you want your player to play an optical disc
automatically, turn on the Optical Disc AutoPlay option on in the Setup menu.
After selecting USB from the Media Navigator
menu, your player automatically starts the system
update procedure if the USB drive contains
system update files. If system update files are not
detected the first time you connect the USB drive,
your player opens the USB Function Select menu
opens, as shown in Step 3.
Note
Playing a disc
To play a di s c :
1 Turn on the TV, then select the input setting on
the TV that matches the connection method
you used to connect your player.
2 Press OPEN/CLOSE on the front of your player
or OPEN/CLOSE on the remote control to
open the disc tray.
3 Place a disc on the tray with the label facing up,
then press OPEN/CLOSE to close the tray. It may
take a few seconds for the disc to load.
4 If the disc does not start playing automatically,
press PLAY/PAUSE.
5 If a Blu-ray Disc or DVD menu opens, press
press ENTER.
6 To eject the disc, press OPEN/CLOSE.
Note
Your player will enter screen saver mode (black
screen) after five minutes if:
Press any button on the remote control or the front of
your player to bring your player out of screen saver
mode.
• If you select BDLive Storage then disconnect the
USB drive, your player uses its internal flash
drive for VFS storage.
• To play files in HD-format, use a USB 2.0 flash
drive.
or to select PLAY/PAUSE, then
• The disc has been ejected or there is no disc in
the tray.
• If you pause playback while playing an MP3, CD,
WMA, DVD, JPEG, or Blu-ray disc.
www.insigniaproducts.com
7
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.