What does the warranty not cover? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
iv
www.insigniaproducts.com
f
It makes a difference how and where you use
As you enjoy your new product, keep these
The issue
The home theater entertainment experience is a growing trend, and larger TVs are popular
purchases. However, TVs are not always supported on the proper stands or installed
according to the manufacturer’s recommendations. We and the consumer electronics
industry are committed to making home entertainment enjoyable and safe.
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers, chests, or
carts may fall over and cause injury.
Tune into safety
•One size of TV stand does not fit all. Use only a TV stand
rated for the weight of your TV.
•Carefully read and understand all enclosed instructions
for proper use of this product.
•Don’t let children climb on or play with entertainment
system furniture and TVs.
•Don’t place TVs on furniture that can easily be used as
steps, such as a crate or chest of drawers.
•Remember that children can become excited while
watching a program, especially on a “larger-than-life” TV.
Make sure that you place or install the TV where it cannot
be pushed, pulled over, or knocked down.
•Make sure that you route all cords and cables so that they
cannot be pulled or grabbed by curious children.
CHILD SAFETY
your flat panel display
safety tips in mind
Wall mounting
If you decide to wall mount your TV, always remember:
•One size of wall mount does not fit all. Use only a wall mount rated for the weight of
your TV and that has been recommended by this TV manufacturer, listed in this
manual, or otherwise listed by an independent laboratory as suitable for your TV.
•Follow all instructions supplied by the TV and wall mount manufacturers.
•If you have any doubts about your ability to safely wall mount your TV, get help from a
professional installer.
•Make sure that the wall where you are mounting the TV is
appropriate. Some wall mounts are not designed to be
mounted to walls backed with steel studs or cinder blocks. If
you are unsure, ask a professional installer.
TVs can be heavy. At least two people are required for safe wall mount installation.
www.insigniaproducts.com
1
NS-24LD120A13
Important Safety
Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within your TV/DVD
combo. This label is located on the
back of your TV/DVD combo.
This symbol indicates that there are
important operating and maintenance
instructions in the literature
accompanying your TV/DVD combo.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9 Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is used,
use caution when moving the
cart/apparatus combination to avoid injury from
tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
15 The wall plug is the disconnecting device. The
plug must remain readily operable.
16 An apparatus with three-prong, grounding-type
plug is a Class I apparatus which needs to be
grounded to prevent possible electric shock.
Make sure that you connect the Class I
apparatus to a grounding-type, three-prong
outlet.
17 Remote control batteries should not be exposed
to excessive heat such as sunshine, fire, or the
like.
18 The apparatus should not be exposed to
dripping or splashing and no objects filled with
liquids, such as vases, should be placed on the
apparatus.
WAR NIN G
Electric shock hazard
To reduce the risk of fire or electric shock, do not
remove any cover or expose the device to rain or
moisture. No user-serviceable parts are inside. Refer
servicing to qualified service technicians.
Lightning
For added protection for your device receiver
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the power outlet and disconnect any
antenna or cable system. This helps prevent
property damage and personal injury from
lightning and power line surges.
Power lines
An outside antenna system should not be located in
the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an
outside antenna system, extreme care should be
taken to keep from touching such power lines or
circuits as contact with them might be fatal.
Handling the LCD panel
• Your TV’s screen is made of glass. Do not drop
your TV/DVD combo or hit, jolt, or press hard
against the LCD panel. If the screen breaks, be
careful of broken glass.
• If the LCD panel is broken, make absolutely sure
that you do not touch the liquid in the panel. This
may cause skin inflammation.
• If the liquid gets in your mouth, immediately
gargle, rinse, and consult with your doctor. Also, if
the liquid gets in your eyes or touches your skin,
consult with your doctor after rinsing for at least
15 minutes or longer in clean water.
2
www.insigniaproducts.com
Replacement parts
When replacement parts are required, make sure
that the service technician uses replacement parts
specified by the manufacturer that have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock,
personal injury, or other hazards.
Safety check
After completing any service or repair to this device,
ask the service technician to perform routine safety
checks to determine that your TV/DVD combo is in
correct operating condition.
Power source
Operate your TV/DVD combo only from the type of
power source indicated on the marking label. If you
are not sure of the type of power supplied to your
home, consult an electrician or your local power
company.
Servicing
These servicing instructions are for use by qualified
service personnel only. To reduce the risk of electric
shock, do not perform any servicing other than that
contained in the operating instructions unless you
are qualified to do so.
CAUTION
Damage requiring service
Unplug this TV/DVD combo from the power outlet
and refer servicing to qualified service personnel
under the following conditions:
• When the power supply cord or plug is damaged
or frayed.
• If liquid has been spilled or objects have fallen
into your TV/DVD combo.
• If your TV/DVD combo has been exposed to rain
or water.
• If your TV/DVD combo does not operate normally
by following the operating instructions. Adjust
only those controls that are covered by the
operating instructions because incorrect
adjustment of other controls may result in
damage and will often require extensive work by
a qualified technician to restore your TV/DVD
combo to its normal operation.
•If your TV/DVD combo has been dropped or
damaged in any way.
• When your TV/DVD combo exhibits a distinct
change in performance.
Outdoor antenna grounding
If an outside antenna or cable system is connected
to your TV/DVD combo, make sure that the antenna
or cable system is grounded to provide some
protection against voltage surges and built-up
static charges. Article 810 of the National Electrical
Code, ANSI/NFPA No. 70, provides information with
respect to correct grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of the antenna-discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
7
Antenna lead-in wire
1
Grounding clamp
2
Antenna discharge unit
3
Grounding conductors
4
Ground clamps
5
Power service grounding electrode system
6
Electric service equipment
7
Note to CATV system installer
Article 820 of the National Electrical Code,
ANSI/NFPA No. 40 provides guidance for correct
grounding. Specifically, it states that the cable
ground must be connected to the grounding
system of the building as close to the point of cable
entry as practical.
Condensation
Moisture will form on the TV/DVD combo if the
TV/DVD combo is brought from cool surroundings
into a warm room or if the temperature of the room
rises suddenly. When this happens, the TV/DVD
combo's performance may be impaired. To prevent
this, let the TV/DVD combo stand in its new
surroundings for about an hour before switching it
on, or make sure that the room temperature rises
gradually.
Condensation may also form during the summer if
the TV/DVD combo is exposed to the breeze from
an air conditioner. In such cases, change the
location of the TV/DVD combo.
Mobile telephone warning
To avoid interference with your TV picture and
sound, operating problems, or even damage, keep
your cordless and cellular telephones away from
the TV/DVD combo.
End of life directives
Your TV/DVD combo contains tin-lead solder and a
fluorescent lamp containing a small amount of
mercury. Disposal of these materials may be
regulated for environmental reasons. Your TV/DVD
combo also contains material that can be recycled
and reused. For disposal or recycling information,
contact your local authorities to find a recycler in
your area.
Non-active pixels
The LCD panel contains almost 3 million thin film
transistors, which provide exceptionally sharp video
quality. Occasionally, a few non-active pixels may
appear on the screen as a fixed blue, green, or red
point. These non-active pixels do not adversely
affect the performance of your TV/DVD combo, and
are not considered defects.
1
2
3
4
5
6
www.insigniaproducts.com
3
NS-24LD120A13 Insignia 24" LCD TV/DVD Combo
Insignia 24" LCD TV/DVD Combo
Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your NS-24LD120A13 represents
the state of the art in LCD TV and DVD player design
and is designed for reliable and trouble-free
performance.
Installing the stand or
wall-mount bracket
Notes
• If you plan to wall-mount your T V/DVD combo,
do not install the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.
Installing the stand
To install the stand:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
Installing a wall-mount bracket
Warni ng
This TV/DVD combo is intended to be supported by a
UL Listed wall mount bracket with suitable
weight/load. (See “Miscellaneous
To attach your TV/DVD combo to a wall-mount
bracket:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 If the stand is attached, press and hold the PUSH
button while you rotate the stand to remove it.
” on page 48.)
2 Align the stand with the stand column, then
rotate the stand in the direction of the arrow
until you hear the stand lock into place.
PUSH button
3 Remove the six screws that secure the stand
column to the TV screen.
4
www.insigniaproducts.com
Insignia 24" LCD TV/DVD Combo
4 Remove the stand column.
5 Attach the wall-mount bracket to your TV/DVD
combo using the mounting holes on the back of
your TV/DVD combo. See the instructions that
came with the wall-mount bracket for
information about how to correctly hang your
TV/DVD combo.
Note
• The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with
the wall-mount bracket for screw lengths.
• The mounting holes on the back of your
TV/DVD combo take type M4 screws.
3.94 in. (100 mm)
TV/DVD combo components
Package contents
• Remote control and batteries (2 AAA)
•Stand
•Quick Setup Guide
• Important Information
Front
2
1
# ItemDescription
Turns off when your TV/DVD combo is on.
1
Power indicator
2
Remote control sensor
3
INPUT
3.94 in. (100 mm)
4
MENU
5
/CH
CH
6
VOL+/VOL–Press to increase or decrease the volume.
7
(play/pause)
8
EJECTPress to eject a disc from the disc slot.
9
POWER
Lights red when your TV/DVD combo is off (standby
mode).
Receives signals from the remote control. Do not block.
Press to open the INPUT SOURCE list, press CH
CH
to select a video input source, then press INPUT
again. For more information, see “Selecting the video
input source” on page 20.
In menu mode, press to confirm selections.
Press to open the on-screen menu. For more
information, see “Navigating the menus
Press to go to the next or previous channel in the
channel list. For more information, see “Selecting a
channel” on page 22.
Press to start or pause disc playback
Press to turn your TV/DVD combo on or off (standby
mode). When your TV/DVD combo is off, power still
flows through it. To completely disconnect power,
unplug the power cord.
EJECT
or
” on page 21.
www.insigniaproducts.com
5
NS-24LD120A13 Insignia 24" LCD TV/DVD Combo
Back
USB HDMI 1 HDMI 2 / DVI VGA
1
PC / DVI
AUDIO IN
COMPONENT INAV IN
DIGITAL
YPBPRVIDEO
OUTPUT
L -AUDIO - R
ANT / CABLE
910374 5286
# ItemDescription
Connect a USB flash drive to this jack to view
1
USB
2
HDMI 1 and HDMI 2/DVI
3
VGA
4
PC/DVI AUDIO IN
DIGITAL OUTPUT
5
(coaxial)
COMPONENT IN
6
Y, P
B, PR
7
AV I N VID EO
8
AV I N L/R (aud io)
9
ANT/CABLE
10
(headphone)
compatible JPEG picture files. For more information,
see “Connecting a USB flash drive
“Using a USB flash drive
Connect HDMI devices to these jacks. For more
information see “Using HDMI (best)
Connect the video for a DVI device to the HDMI 2/DVI
jack. For more information, see “Using DVI (same as
HDMI but requires a sound connection)” on
page 10
or 13.
Connect the video for a computer to this jack. For more
information, see “Connecting a computer
Connect the audio for a computer to this jack. For more
information, see “Connecting a computer
OR
Connect the audio for a DVI device to the this jack. For
more information, see “Using DVI (same as HDMI but
requires a sound connection)” on page 10 or page 13.
Connect a digital audio amplifier or home theater
system to this jack to listen to TV audio through the
amplifier speakers. For more information, see
“Connecting a basic home theater system
Connect the video for a component video device to
these jacks. For more information, see “Using
component video (better)” on page 10 or 13.
Connect the video for a composite video device to the
this jack. For more information, see “Using composite
video (good)” on page 11 or 14.
The component video jacks (COMPONENT IN Y, PB,
and PR) share these audio jacks with the composite
video jack (AV IN VID EO).
Connect the audio for a component video device to
these jacks. For more information, see “Using
component video (better)” on page 10 or 13.
OR
Connect the audio for a composite video device to
these jacks. For more information, see “Using
composite video (good)” on page 11 or 14.
Connect an antenna or cable TV to this jack. For more
information, see “Connecting an antenna or cable TV
(no box)” on page 12.
Connect headphones to this jack. For more
information, see “Connecting headphones
page 17.
” on page 16 and
” on page 38.
” on page 9 or 12.
” on page 15.
” on page 15.
” on page 17.
” on
6
www.insigniaproducts.com
Insignia 24" LCD TV/DVD Combo
Remote control
POWER
TV DVD HDMI VIDEO
HOME
CCD
PICTURE AUDIO SLEEP
MENU
# ButtonDescription
Press to turn your TV/DVD combo on or off (standby
1
(power)
2
Numbers
3
4
Quick Launch Inputs
VOL+/–
5
EXIT
6
7
OKPress to confirm selections or changes.
MTS/SAP
8
9
HOMEThis button has no function.
mode). When your TV/DVD combo is off, power still
flows through it. To disconnect power, unplug the
power cord.
Press to enter channel numbers and the parental
control password.
Press to enter a digital sub-channel number. For more
information, see “Selecting a channel
TV—Press to select your TV as the input source.
DVD—Press to select the DVD player as the input
source.
HDMI—Press one or more times to select the device
connected to the HDMI 1 or HDMI 2/DVI jack.
VIDEO—Press to select the device connected to the
COMPONENT IN jacks or AV IN VI DEO jack.
Press to increase or decrease the volume.
Press to close the on-screen menu.
Press to select the audio mode for an analog program.
You can s ele ct :
• MONO—Select this option if there is noise
• STEREO—Select this option for programs
INPUT
RECALL
TV-MENU
MTS/SAP FAVORITE
ZOOM
CH-LIST
TOP MENU
SETUP
SUBTITLE
AUDIO
DVD
NS-RC05A-13
or static on weak stereo broadcasts.
broadcast in stereo.
INFO*
” on page 22.
# ButtonDescription
Press to turn closed captioning on or off. You can select
10
CCD
11
PICTURE
12
AUDIO
13
MENUPress to open the DVD menu.
14
SETUP
15
DVD playback controls
16
INPUT
17
(return)
18
/MUTE
CH/CH
19
20
TV-MENUPress to open the on-screen menu.
21
FAVO RIT E
22
23
INFO
ZOOM
24
25
CH-LISTPress to open the channel list.
26
SLEEP
27
SUBTITLEPress to select a DVD subtitle language, if available.
28
TOP M ENUPress to open the DVD title menu.
29
AUDIO
CC Off, CC On, or CC On when Mute. For more
information, see “Turning closed captioning on or off
on page 33
.
Press to select the picture mode. You can select Vivid,
Standard, Energy Savings, Theater, Sports, or
Custom. For more information, see “Picture Mode” in
“Adjusting the TV picture
” on page 22.
Press to select the sound mode. You can select
Standard, News, Music, Theater, or Custom. For
more information, see “Sound Mode” in “Adjusting
sound settings” on page 24.
Press to open the DVD setup menu.
(eject)
(play/pause)
(stop)
(fast reverse)
(fast forward)
(previous chapter)
(next chapter)
Press to open the INPUT SOURCE list, press or on
the remote control to select the video input source,
then press OK. For more information, see “Selecting
the video input source” on page 20.
In TV mode, press to return to the previous channel.
In USB mode, press to go back to a higher level folder.
Press to mute the sound. Press again to restore the
sound.
Press to change TV channels. For more information,
see “Selecting a channel
” on page 22.
Press to navigate in on-screen menus and to adjust
settings.
Press to open the Favorit e channel list. For more
information, see “Setting up a favorite channel list
page 27 and “Viewing a favorite channel” on page 27.
Press to display TV status information, such as the
channel number, channel name (if available), or signal
source. For more information, see “Viewing channel
information” on page 22.
Press to change how the picture looks on the screen
(aspect ratio). For more information, see “Aspect ratio
options” on page 23.
Press to set the sleep timer. You can select Off, 5, 10, 15, 30, 60, 90, 120, 180, or 240 minutes. For more
information, see “Setting the sleep timer
Press to select a different DVD audio language, if
available.
”
” on
” on page 36.
www.insigniaproducts.com
7
NS-24LD120A13 Insignia 24" LCD TV/DVD Combo
Making connections
What connection should I use?
Your TV/DVD combo has several connection types
for connecting devices to your TV/DVD combo.
For the best video quality, you should connect a
device to the best available connection.
Use the following tables to identify cables:
Connection type
and jack
HDMI
video/audio
Component
video (requires
an audio
connection)
Video qualityCable connector
Best (use this
if your devices
have HDMI)
Better than
composite or
coaxial
Connection type
and jack
Coaxial digital
audio
Analog audio
VGA (computer)
video and audio
Cable connectors
Composite video
(requires an
audio
connection)
Coaxial
video/audio
Better than
coaxial
Good
You can use the HDMI 2/DVI jack on your TV/DVD
combo to connect a DVI device to your TV/DVD
combo. You need to attach an HDMI-to-DVI adapter
to the end of the HDMI cable that connects to the
DVI device.
Cautions
• Check the jacks for position and type before
making any connections.
• Loose connections can result in image or color
problems. Make sure that all connections are
tight and secure.
• The external audio/video equipment shown
may be different from your equipment. If you
have questions, refer to the documentation that
came with your equipment.
• Always unplug the power cord when
connecting external equipment.
8
www.insigniaproducts.com
Insignia 24" LCD TV/DVD Combo
O
Connecting power
To connect the power:
• Plug the AC power cord into a power outlet.
Cautions
• Your TV/DVD combo should only be operated
from the power source indicated on the label.
• Always unplug the AC power cord from the
power outlet when you will not be using your
TV/DVD combo for an extended period of time.
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than
one connection type. To get the best video, you
should use the best connection type available. For
more information, see “What connection should I
use?” on page 8.
Using HDMI (best)
To connect a cable or satellite box using HDMI:
1 Make sure that your TV/DVD combo’s power
cord is unplugged, and all connected
equipment is turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an HDMI cable (not provided) to one of
the HDMI jacks on the back of your TV/DVD
combo and to the HDMI OUT jack on the cable
or satellite box.
Cable or satellite box
HDMI cable
PC / DVI
USBHDMI 1 HDMI 2 / DVIVGA
Back of TV/DVD combo
AUDIO IN
DIGITAL
OUTPUT
4 Plug your TV/DVD combo’s power cord into a
power outlet, turn on your TV/DVD combo, then
turn on the cable or satellite box.
5 Go through the Setup Wizard on page 19
Note
An HDMI cable carries both audio and video. You do
not need to use any audio cables.
.
C
Y
www.insigniaproducts.com
9
NS-24LD120A13 Insignia 24" LCD TV/DVD Combo
O
T
Using DVI (same as HDMI but requires a sound
connection)
Note
You must use the HDMI 2/DVI jack to connect a
cable or satellite box using DVI. If you use another
HDMI jack, you will not hear sound.
To connect a cable or satellite box using DVI:
1 Make sure that your TV/DVD combo’s power
cord is unplugged, and all connected
equipment is turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
cable or satellite box.
4 Connect the other end of the cable to the
HDMI 2/DVI jack on the back of your TV/DVD
combo.
Cable or satellite box
Using component video (better)
To connect a cable or satellite box using
component video:
1 Make sure that your TV/DVD combo’s power
cord is unplugged, and all connected
equipment is turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a component video cable (not
provided) to the COMPONENT INY, P
video jacks on the back of your TV/DVD combo
and the component video out jacks on the cable
or satellite box.
Cables are often
color-coded to m atch
color-coded jacks.
Component video cable
B, and PR
Cable or satellite b ox
Audio cable
HDMI cable with
HDMI-DVI adapter
PC / DVI
DIGITAL
USBHDMI 1 HDMI 2 / DVIVGA
Back of TV/DVD combo
AUDIO IN
OUTPUT
Y
5 Connect a 3.5mm audio cable (not provided) to
the PC/DVI AUDIO IN jack on the back of your
TV/DVD combo and to the AUDIO OUT jacks on
the cable or satellite TV box.
Note
When you connect the audio using the PC/DVI
AUDI O IN jack, the audio output is analog.
6 Plug your TV/DVD combo’s power cord into a
power outlet, turn on your TV/DVD combo, then
turn on the cable or satellite TV box.
7 Go through the Setup Wizard on page 19
.
3.5mm audio cable
PC / DVI
AUDIO IN
DIGITAL
OUTPUT
COMPONENT INAV IN
YPBPRVIDEO
Back of TV/DVD combo
L - AUDIO - R
AN
4 Connect an audio cable (not provided) to the
C
AV I N L /R AU DIO jacks on the back of your
TV/DVD combo and to the audio out jacks on
the cable or satellite TV box.
Note
•The COMPONENT IN video jacks share the
AV IN L/R AUDIO jacks with the AV I N V IDE O
jack.
• When you connect the audio using the
AV IN L/R AUDIO audio jacks, the audio output
is analog.
5 Plug your TV/DVD combo’s power cord into a
power outlet, turn on your TV/DVD combo, then
turn on the cable or satellite TV box.
6 Go through the Setup Wizard on page 19
.
10
www.insigniaproducts.com
Insignia 24" LCD TV/DVD Combo
T
Using composite video (good)
To connect a cable or satellite box using
composite video:
1 Make sure that your TV/DVD combo’s power
cord is unplugged, and all connected
equipment is turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an A/V cable (not provided) to the
AV I N V ID EO jack and L/RAUDIO jacks on the
back of your TV/DVD combo and to the
composite video and audio out jacks on the
cable or satellite box.
Note
•The AV IN V ID EO jack shares the AV IN
L/RAUDIO jacks with the COMPONENT IN
video jacks.
• When you connect the audio using the AV INL/RAUDIO jacks, the audio output is analog.
Cables are often color-coded
to match color-coded jacks.
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1 Make sure that your TV/DVD combo’s power
cord is unplugged, and all connected
equipment is turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a coaxial cable (not provided) to the
ANT/CABLE jack on the back of your TV/DVD
combo and to the coaxial out jack on the cable
or satellite box.
Cable or satellite box
Cable or satellite box
Coaxial cable
A/V cable
PC / DVI
AUDIO IN
DIGITAL
OUTPUT
COMPONENT INAV IN
YPBPRVIDEO
Back of TV/DVD combo
L - AUDIO - R
4 Plug your TV/DVD combo’s power cord into a
power outlet, turn on your TV, then turn on the
cable or satellite TV box.
5 Go through the Setup Wizard on page 19
.
COMPONENT INAV IN
IGITAL
YPBPRVIDEO
UTPUT
Back of TV/DVD combo
L - AUDIO - R
ANT / CABLE
4 Plug your TV/DVD combo’s power cord into a
power outlet, turn on your TV, then turn on the
cable or satellite TV box.
AN
5 Go through the Setup Wizard on page 19
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
.
www.insigniaproducts.com
11
NS-24LD120A13 Insignia 24" LCD TV/DVD Combo
O
Connecting an antenna or cable TV (no box)
To connect an antenna or cable TV (no box):
1 Make sure that your TV/DVD combo’s power
cord is unplugged, and all connected
equipment is turned off.
2 Connect a coaxial cable to the ANT/CABLE jack
on the back of your TV/DVD combo and to the
antenna or cable TV wall jack.
Antenna or
cable TV (no box)
Coaxial cable
COMPONENT INAV IN
IGITAL
YPBPRVIDEO
UTPUT
L - AUDIO - R
ANT / CABLE
Connecting a DVD or Blu-ray player
Using HDMI (best)
To connect a DVD or Blu-ray player using HDMI:
1 Make sure that your TV/DVD combo’s power
cord is unplugged and the DVD or Blu-ray player
is turned off.
2 Connect an HDMI cable (not provided) to one of
the HDMI jacks on the back of your TV/DVD
combo and to the HDMI OUT jack on the DVD
or Blu-ray player.
DVD or Blu- ray player
HDMI cable
USBHDMI 1 HDMI 2 / DVIVGA
Back of TV/DVD combo
PC / DVI
AUDIO IN
DIGITAL
OUTPUT
C
Y
Back of TV/DVD combo
3 Plug your TV/DVD combo’s power cord into a
power outlet, then turn on your TV/DVD combo.
4 Go through the Setup Wizard on page 19
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
• If the antenna is not installed correctly, contact
qualified service personnel to correct the
problem.
• If the signal level for a channel is weak, the
picture may be distorted. Adjust the antenna or
use a highly directional outdoor or set-top
antenna with a built-in amplifier.
• If the picture quality is good on some channels
and poor on others, the problem may be caused
by a poor or weak signal from the broadcaster
or cable TV provider.
• If you connect to cable or satellite TV without a
set-top box and experience poor picture quality,
you may need to install a set-top box to improve
signal reception and picture quality. Contact
your cable or satellite TV provider about
upgrading to a set-top box.
• Many high-definition (HD) channels upscale
standard-definition (SD) content. The picture
displayed on your TV/DVD combo is still
displayed as SD, thus the picture quality will not
be as clear or crisp as it would be if the content
was originally recorded in HD.
.
3 Plug your TV/DVD combo’s power cord into a
power outlet, then turn on your TV/DVD combo.
4 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
or to highlight HDMI 1or HDMI 2,
then press OK.
Note
You can also press HDMI repeatedly to select the
DVD or Blu-ray player.
12
www.insigniaproducts.com
Insignia 24" LCD TV/DVD Combo
O
T
Using DVI (same as HDMI but requires a sound
connection)
Note
You must use the HDMI 2/DVI jack to connect a DVD
or Blu-ray player using DVI. If you use another HDMI
jack, you will not hear sound from the TV/DVD
combo speakers.
To connect a DVD or Blu-ray player using DVI:
1 Make sure that your TV/DVD combo’s power
cord is unplugged and the DVD or Blu-ray player
is turned off.
2 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
DVD or Blu-ray player.
3 Connect the other end of the cable to the
HDMI 2/DVI jack on the back of your TV/DVD
combo.
DVD or Blu-ray player
HDMI cable with
HDMI-DVI adapter
3.5mm audio
cable
Using component video (better)
To connect a DVD or Blu-ray player using
component video:
1 Make sure that your TV/DVD combo’s power
cord is unplugged and the DVD or Blu-ray player
is turned off.
2 Connect a component video cable (not
provided) to the COMPONENT IN Y, P
jacks on the back of your TV/DVD combo and to
the COMPONENT OUT jacks on the component
video device.
Cables are often color-coded
to match color-cod ed jacks.
Component video cable
PC / DVI
AUDIO IN
DIGITAL
OUTPUT
COMPONENT INAV IN
YPBPRVIDEO
B, and PR
DVD or Blu -ray player
L - AUDIO - R
Audio cable
AN
USBHDMI 1 HDMI 2 / DVIVGA
Back of TV/DVD combo
PC / DVI
AUDIO IN
DIGITAL
OUTPUT
C
Y
4 Connect a 3.5mm audio cable (not provided) to
the PC/DVI AUDIO IN jack on the back of your
TV/DVD combo and to the AUDIO OUT jacks on
the DVD or Blu-ray player.
5 Plug your TV/DVD combo’s power cord into a
power outlet, then turn on your TV/DVD combo.
6 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
7 Press INPUT to open the INPUT SOURCE list.
8 Press
or to select HDMI 2, then press OK.
Note
You can also press HDMI one or more times to select
the DVD or Blu-ray player.
Back of TV/DVD combo
3 Connect an audio cable to the AV IN L/R AUDIO
jacks on the back of your TV/DVD combo and to
the L/RAUDIO OUT jacks on the DVD or Blu-ray
player.
Notes
•The COMPONENT IN video jacks share the
AV IN L/R AUDIO jacks with the AV I N V IDE O
jack.
• When you connect the audio using the AV I N
L/R AUDIO jacks, the audio output is analog.
4 Plug your TV/DVD combo’s power cord into a
power outlet, then turn on your TV/DVD combo.
5 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
6 Press INPUT to open the INPUT SOURCE list.
7 Press
or to select Component, then press
OK.
Note
You can also press VIDEO to select the DVD or Blu-ray
player.
www.insigniaproducts.com
13
Loading...
+ 38 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.