Innovaphone IP800 Datasheet

Page 1
Errors and omissions excepted. All information, technical specifications and delivery times may be subject to change.
ds_IP800_en.doc, issue: 05/2011, Copyright © 2000-2011 innovaphone® AG
innovaphone® AG
Tel +49 7031 7 30 09-0 Fax +49 70 31 7 30 09-99
www.innovaphone.com
E-mail: info@innovaphone.com
innovaphone IP800
VoIP gateway for five ISDN BRI interfaces
and platform for innovaphone PBX
Data sheet
Order number: 01-00800-016
Housing
Size: 210 x 184 x 32 mm 1 HE for 19” systems
Weight: 1050 g
Interfaces
4 x ISDN BRI: TE and NT mode to insert in
trunk lines,
inline powered, „Power-off-
loop“ interconnect two BRI interface in power off status
1 x ISDN BRI interface in TE mode only
2 x Ethernet: RJ 45 interface 10/100-BASE-TX
(auto negotiation), Power over Ethernet (802.3af, Class 3)
Slot for Compact Flash Cards Type I
Hardware
Power supply: internal mains adapter, 100-240 V, 15 W or Power over Ethernet (802.3af, Class 3)
Digital Signal Processor (DSP) for codecs up to 10 voice channels 32 MB SDRAM, 8 MB Flash
Operation temperature: 0 °C to +45 °C, Humidity: 10% to 90% (not condensed) Storage temperature: -10 °C to +70 °C
VoIP protocols
H.323 version 5 SIP version 2, conform RFC 3261 SIP over UDP, TCP, TLS, SIPS RTP, SRTP, RTCP T.38 (Fax)
Voice Codecs: G.711 A-law / µ-law, G.729AB, VAD, CNG, Dynamic Jitter Buffering Echo Compensation: G.168
Network
PPPoE, manual or automatic connection after boot
PPTP Tunneling up to 32 tunnels simultaneously, encoding via MPPE
NAT, H.323-NAT
RSTP, IEEE 802.1x
VLAN-ID
NTP support
ISDN
Routing VOIP-ISDN, ISDN-ISDN, VOIP-VOIP
Automatic dial tone European and US
Standard
ENUM for H.323 and SIP protocols
Protokolle EDSS1, QSIG, T1-CAS, E1-CAS
Plays recorded messages deposed on CF
card or on a web server
Administration
Password protected administration via web­browser, Kerberos server
Log and trace files, Display of interface and connection status, Ping – connection test for Internet Protocol, Sending SNMP Traps
Save and reload config files, Boot code and firmware update via HTML upload, Automatic update via update server
Loading...