Ingersoll-Rand Intellisys Remote Interface Operators/instruction Manual And Parts List
INGERSOLLRAND@
AIR COMPRESSORS
INTELLISYS
REMOTE
INTERFACE
OPERATORS/
INSTRUCTION MANUAL
PARTS LISTS
1
Before installation or starting the lntellisys Remote Interface
for the first time, this manual should be studied carefully to
obtain a clear knowledge of the unit and or the duties to be
performed while operating and maintaining the unit
RETAIN THIS MANUAL WITH UNIT.
This technical manual contains
and should be kept with the lntellisys Remote Interface at all
times.
IMPORTANT SAFETY DATA
I
APDD 635A
March 1997
Bit 0: Host/Local (R/W)
0 = Local
1 = Host
Bit 1: Run/Stop
(R/W)
0 = stop
1 = Run
Bit 2: Load/Unload
(R/W)
0 = Unload
1 = Load
Bit 3: Modulating (R)
0 = Not Modulating
1 = Modulating
Bit 4: Unused
Bit 5: Stopped in Auto Restart (R)
0 = Not Stopped in Auto Restart
1 = Stopped in Auto Restart
Bit 6: Alarm (R)
0 = No Alarms
1 = Alarms
Bit 7: Warning (R)
0 = No Warnings
1
= Warnings
Bit 8: On/Off Line Mode (R)
0 = Not in On/Off Line Mode
1 = On/Off Line Mode
Bit 9:
Mod/ACS
0 = Not in
1 =
or Mod Only (R)
Mod/ASC
Mod/ASC
Mode
Bits 10-12: Unused
Bits 13-15: Unit Type (R)
001 = SSR controller
Mode
FIGURE 4-2 INTELLISYS SSR CONTROLLER REGISTER
Register 096: Language
0 = English
1 = Spanish
2 = French
3 = Portuguese
OISTATUSICONTROL
Register 097: Units of Measure
= “F and PSI
0
1 = “C and PSI
2 = “C and Bar
3 = “C and
4 = “C and kg/cm2
Register 99: Rated Horse Power
0 = 50
1
=60
2 = 75
3=
100
4=
125
5=
150
6 = 200
7 = 250
8 = 300
9 = 350
10=400
II=450
FIGURE 4-3 INTELLISYS SSR CONTROLLER REGISTER CODES
Bit 0: Run/Stop (R)
0 = stop
1 = Run
Bit 1: On/Off Line Mode (R)
Bit 4: Stopped Auto Restart (R)
0 = Not Stopped in Auto Restart
1 = Stopped in Auto Restart
Bit 5: Unused
0 = Not in On/Off Line Mode
1 = On/Off Line Mode
Bit
2:. MODlACS
0 = Not in
1 =
Mode (R)
Mod/ACS
Mod/ACS
Mode
Bit 3: Load/Unload (R)
Mode
Bit 6: Unused
Bit 7: Unused
0 = Unload
kPa
FIGURE 4-4 INTELLISYS SSR CONTROLLER STATUS ALARM HISTORY
16
Loading...