InFocus X17, X16 User Manual

Download

Introduction.................. 3

Projector features........................... 3

Shipping contents .......................... 4

Projector exterior view ................... 5

Controls and functions ................... 6

Positioning your

projector .......................9

Choosing a location ....................... 9

Obtaining a preferred projected

image size.................................... 10

Connection................. 13

Connecting a computer or

monitor ......................................... 13

Connecting Video source

devices......................................... 15

Operation.................... 19

Starting up the projector............... 19

Using the menus .......................... 20

Utilizing the password function .... 21

Switching input signal .................. 23

Adjusting the projected image...... 24

Magnifying and searching

for details ..................................... 26

Selecting the aspect ratio............. 26

Optimizing the image ................... 28

Setting the presentation timer...... 32

Hiding the image .......................... 33

Locking control keys .................... 33

Freezing the image ...................... 34

Operating in a high altitude

environment ................................. 34

Adjusting the sound ..................... 34

Personalizing the projector menu

display.......................................... 35

Shutting down the projector ......... 35

Menu operation............................ 36

Maintenance...............43

Care of the projector .................... 43

Lamp information ......................... 44

Troubleshooting ........50

Specifications ............51

Projector specifications................ 51

Dimensions .................................. 52

Timing chart ................................. 52

information.................54

Table of contents2

Introduction

Projector features

The projector integrates high-performance optical engine projection and a userfriendly design to deliver high reliability and ease of use.

The projector offers the following features.

• Wall color correction allowing projection on surfaces of several predefined colors

• Quick auto search speeding up the signal detecting process

• Selectable password protected function

• Up to 11 sets of picture modes providing multiple choices for different projection purposes

• 3D color management allowing color adjustments to your liking

• Selectable quick cooling function makes the projector cool in a shorter time

• Presentation timer for better control of time during presentations

• One-key auto-adjustment to display the best picture quality

• Digital keystone correction to correct distorted images

• Adjustable color balance control for data/video display

• High brightness projection lamp

• Ability to display 16.7 million colors

• Multi-language On-Screen Display (OSD) menus

• Switchable normal and economic modes to reduce the power consumption

• Component HDTV compatibility (YP

• High quality manual zoom lens

• The apparent brightness of the projected image will vary depending on the ambient lighting conditions, selected input signal contrast/brightness settings, and is directly proportional to projection distance.

• The lamp brightness will decline over time and may vary within the lamp manufacturers specifications. This is normal and expected behavior.

bPr)

Introduction 3

Shipping contents

Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase.

Standard accessories

The supplied accessories will be suitable for your region, and may differ from those illustrated.

Projector Power Cord VGA Cable

Reference

Guide CD

Remote Control & Battery

Registration

Card

Quick Start Guide

Pull the tab before using the remote control.

Optional accessories

1. Ceiling mount, wall mount

2. LiteShow II wireless presentation adaptor

3. Pull down and pull up 4:3 screens

4. Cables and adaptors

5. Replacement lamp

6. Optional cases

Introduction4

Warranty

Booklet

Safety

Booklet

Projector exterior view

Front/upper side

Rear/lower side

16 18

1513121110

1. External control panel (See "Projector and remote

control" on page 6 for details.)

2. Vent (heated air exhaust)

3. Quick-release button

4. Lens cover

5. Focus ring and Zoom ring

6. Front IR remote sensor

7. Projection lens

8. AC power cord inlet

9. RS-232 control port

10. RGB signal output socket

11. RGB (PC)/Component video (YPbPr/YCbCr) signal input socket

12. Video input socket

13. S-Video input socket

14. Audio signal input socket

15. Kensington anti-theft lock slot

16. Quick-release foot

17. Lamp cover

18. Rear adjuster foot

Warni ng

• THIS APPARATUS MUST BE EARTHED.

• When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to an easily accessible socket-outlet near the unit. If a fault should occur during operation of the unit, operate the disconnect device to switch the power supply off, or disconnect the power plug.

Introduction 5

Controls and functions

Projector and remote control

1 2 3

4 5

1. Focus ring

Adjusts the focus of the projected image. See "Fine-tuning the image size

and clarity" on page 25 for details.

2. Zoom ring

Adjusts the size of the image. See

"Fine-tuning the image size and clarity" on page 25 for details.

3. TEMPerature indicator light

Lights up red if the projector's temperature becomes too high. See

"Indicators" on page 49 for details.

4. POWER indicator light

Lights up or flashes when the projector is under operation. See "Indicators" on

page 49 for details.

5. POWER

6. Left/BLANK

7. MODE/ENTER

Toggles the projector between standby mode and on. See "Starting

up the projector" on page 19 and "Shutting down the projector" on page 35 for details.

Used to hide the screen picture. See

"Hiding the image" on page 33 for

details.

Selects an available picture setup mode. See "Selecting a picture mode"

on page 28 for details.

Enacts the selected On-Screen Display (OSD) menu item. See "Using

the menus" on page 20 for details.

Introduction6

8. MENU/EXIT

Turns on the On-Screen Display (OSD) menu.Goes back to previous OSD menu, exits and saves menu settings. See "Using the menus" on

page 20 for details.

9. LAMP indicator light

Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. See "Indicators"

on page 49 for details.

10. AUTO

Automatically determines the best picture timings for the displayed image. See "Auto-adjusting the

image" on page 24 for details.

11. Keystone/Arrow keys ( / Up,

/Down)

Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 25 for details.

12. Right/

Activates panel key lock. See "Locking

control keys" on page 33 for details.

When the On-Screen Display (OSD) menu is activated, the #6, #11, and #12 keys are used as directional arrows to select the desired menu items and to make adjustments. See

"Using the menus" on page 20 for

details.

13. SOURCE

Displays the source selection bar. See "Switching input signal" on page

23 for details.

14. Freeze

Freezes the projected image. See

"Freezing the image" on page 34 for

details.

15. Left

Selects the desired menu items and to make adjustments. See "Using the

menus" on page 20 for details.

16. BLANK

Used to hide the screen picture. See

"Hiding the image" on page 33 for

details.

17. Digital Zoom keys (+, -)

Magnifies or reduces the projected picture size. See "Magnifying and

searching for details" on page 26 for

details.

Introduction 7

Remote control effective range

Infra-Red (IR) remote control sensor is located on the front of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor to function correctly. The distance between the remote control and the sensor should not exceed 8 meters (~ 26 feet).

Make sure that there are no obstacles between

the remote control and the IR sensor on the projector that might obstruct the infra-red beam.

Replacing the remote control battery

1. Pull out the battery holder.

Please follow the illustrated instructions. Push and hold the locking arm while pulling out the battery holder.

2. Insert the new battery in the holder. Note the positive polarity should face outward.

3. Push the holder into the remote control.

CAUTION

• Avoid excessive heat and humidity.

• There may be battery damage if the battery is incorrectly replaced.

• Replace only with the same or equivalent type recommended by the battery manufacturer.

• Dispose of the used battery according to the battery manufacturer’s instructions.

• Never throw a battery into a fire. There may be danger of an explosion.

• If the battery is dead or if you will not be using the remote control for a long time, remove

the battery to prevent damage to the remote control from possible battery leakage.

Introduction8

Positioning your projector

Choosing a location

Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment.

Your projector is designed to be installed in one of four possible installation locations:

1. Front Table

Select this location with the projector placed near the floor in front of the screen. This is the most common way to position the projector for quick setup and portability.

2. Front Ceiling

Select this location with the projector suspended upside-down from the ceiling in front of the screen.

Purchase the InFocus projector ceiling mount kit from your dealer to mount your projector on the ceiling.

Set Front Ceiling in the SYSTEM SETUP: Basic >

Projector Position menu after you turn the projector on.

3. Rear Table

Select this location with the projector placed near the floor behind the screen.

Note that a special rear projection screen is required.

Set Rear Table in the SYSTEM SETUP: Basic > Projector Position menu after you turn the projector on.

4. Rear Ceiling

Select this location with the projector suspended upside-down from the ceiling behind the screen.

Note that a special rear projection screen and the InFocus projector ceiling mounting kit are required for this installation location.

Set Rear Ceiling in the SYSTEM SETUP: Basic > Projector Position menu after you turn the projector on.

Positioning your projector 9

Obtaining a preferred projected image size

The distance from the projector lens to the screen, the zoom setting, and the video format each factors in the projected image size.

4:3 is the native aspect ratio of this projector. To be able to project a complete 16:9 (widescreen) aspect ratio image, the projector can resize and scale a widescreen image to the projector's native aspect width. This will result in a proportionally smaller height equivalent to 75% of the projector's native aspect height.

4:3 aspect image in a 4:3

aspect display area

Thus, a 16:9 aspect image will not utilize 25% of the height of a 4:3 aspect image displayed by this projector. This will be seen as darkened (unlit) bars along the top and bottom (vertical 12.5% height respectively) of the 4:3 projection display area whenever displaying a scaled 16:9 aspect image in the vertical center of the 4:3 projection display area.

The projector should always be placed horizontally level (like flat on a table), and positioned directly perpendicular (90° right-angle square) to the horizontal center of the screen. This prevents image distortion caused by angled projections (or projecting onto angled surfaces).

The modern digital projector does not project directly forward (like older style reelto-reel film projectors did). Instead, digital projectors are designed to project at a slightly upward angle above the horizontal plane of the projector. This is so that they can be readily placed on a table and will project forward and upwards onto a screen positioned so that the bottom edge of the screen is above the level of the table (and everyone in the room can see the screen).

If the projector is mounted on a ceiling, it must be mounted upside-down so that it projects at a slightly downward angle.

You can see from the diagram on page 12, that this type of projection causes the bottom edge of the projected image to be vertically offset from the horizontal plane of the projector. When ceiling mounted, this refers to the top edge of the projected image.

If the projector is positioned further away from the screen, the projected image size increases, and the vertical offset also increases proportionately.

When determining the position of the screen and projector, you will need to account for both the projected image size and the vertical offset dimension, which are directly proportional to the projection distance.

InFocus has provided a table of 4:3-aspect-ratio screen sizes to assist you in determining the ideal location for your projector. There are two dimensions to consider, the perpendicular horizontal distance from the center of the screen (projection distance), and the vertical offset height of the projector from the horizontal edge of the screen (offset).

16:9 aspect image scaled to a 4:3

aspect display area

Positioning your projector10

How to determine the position of the projector for a given screen size

1. Select your screen size.

2. Refer to the table and find the closest match to your screen size in the left columns labelled "4:3 screen diagonal". Using this value, look across this row to the right to find the corresponding average distance from screen value in the column labelled "Average". This is the projection distance.

3. On that same row, look across to the right column and make note of the

"Vertical offset in mm" value. This will determine the final vertical offset

placement of the projector in relation to the edge of the screen.

4. The recommended position for the projector is aligned perpendicular to the horizontal center of the screen, at the distance from the screen determined in step 2 above, and offset by the value determined in step 3 above.

For example, if you are using a 108-inch screen, the average projection distance is 4362 mm and with a vertical offset of 165 mm.

If you place the projector in a different position (to that recommended), you will have to tilt it down or up to center the image on the screen. In these situations, some image distortion will occur. Use the Keystone function to correct the distortion. See "Correcting keystone" on page 25 for details.

How to determine the recommended screen size for a given distance

This method can be used for situations where you have purchased this projector and would like to know what screen size will fit in your room.

The maximum screen size is limited by the physical space available in your room.

1. Measure the distance between the projector and where you want to position the screen. This is the projection distance.

2. Refer to the table and find the closest match to your measurement in the average distance from screen column labelled "Average". If the min and max values are available on the table, check that your measured distance is between the min and max distances listed on either side of the average distance value.

3. Using this value, look across that row to the left to find the corresponding screen diagonal listed in that row. That is the projected image size of the projector at that projection distance.

4. On that same row, look across to the right column and make note of the

"Vertical offset in mm" value. This will determine the final placement of the

screen in relation to the horizontal plane of the projector.

For example, if your measured projection distance was 4.5 m (4500 mm), the closest match in the "Average" column is 4362 mm. Looking across this row shows that a 108-inch screen is required.

Positioning your projector 11

Projection dimensions

Refer to "Dimensions" on page 52 for the center of lens dimensions of this projector before calculating the appropriate position.

Maximum zoom

Minimum zoom

Screen

Center of lens

Vertical offset

Projection distance

4:3 screen diagonal Recommended projection distance

from screen in mm

Feet Inches mm Min length

4 48 1219 1846 1938 2031 73

59 1500 2271 2385 2498 90 5 60 1524 2308 2423 2538 91 6 72 1829 2769 2908 3046 110

79 2000 3028 3180 3331 120 7 84 2134 3231 3392 3554 128 8 96 2438 3692 3877 4062 146

98 2500 3786 3975 4164 150 9 108 2743 4154 4362 4569 165

118 3000 4543 4770 4997 180

There is 3% tolerance among these numbers due to optical component variations. InFocus recommends that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector in situ before you permanently install it, so as to make allowance for this projector's optical characteristics. This will help you determine the exact mounting position so that it best suits your installation location.

(with max.

zoom)

Average Max length

(with min.

zoom)

Vertical offset in

Positioning your projector12

Connection

When connecting a signal source to the projector, be sure to:

1. Turn all equipment off before making any connections.

2. Use the correct signal cables for each source.

3. Ensure the cables are firmly inserted.

In the connections shown below, some cables may not be included with the projector (see

"Shipping contents" on page 4). They are commercially available from electronics stores.

Connecting a computer or monitor

Connecting a computer

The projector provides a VGA input socket that allows you to connect it to both IBM® compatibles and Macintosh® computers. A Mac adapter is needed if you are connecting legacy version Macintosh computers.

To connect the projector to a notebook or desktop computer:

1. Take the supplied VGA cable and connect one end to the D-Sub output socket of the computer.

2. Connect the other end of the VGA cable to the D-SUB IN signal input socket on the projector.

Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Adjusting the sound" on page 34 for details.

The final connection path should be like that shown in the following diagram:

Notebook or desktop computer

VGA cable

Many notebooks do not turn on their external video ports when connected to a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press FN and the labeled function key simultaneously. Refer to your notebook's documentation to find your notebook's key combination.

Audio cable

Connection 13

Connecting a monitor

If you want to view your presentation close-up on a monitor as well as on the screen, you can connect the D-SUB OUT signal output socket on the projector to an external monitor with a VGA cable following the instructions below:

To connect the projector to a monitor:

1. Connect the projector to a computer as described in "Connecting a computer"

on page 13.

2. Take a suitable VGA cable (only one supplied) and connect one end of the cable to the D-Sub input socket of the video monitor. Or if your monitor is equipped with a DVI input socket, take a VGA to DVI-A cable and connect the DVI end of the cable to the DVI input socket of the video monitor.

3. Connect the other end of the cable to the D-SUB OUT socket on the projector.

The final connection path should be like that shown in the following diagram:

Notebook or desktop computer

VGA to DVI-A cable

VGA cable

• The D-Sub output only works when an appropriate D-Sub input is made to the projector.

• If you wish to use this connection method when the projector is in standby mode, make

sure the VGA Out function is turned on in the SYSTEM SETUP: Advanced menu. See "VGA

Out" on page 41 for details.

Connection14

Connecting Video source devices

You can connect your projector to various Video source devices that provide any one of the following output sockets:

• Component Video

• S-Video

• Video (composite)

You need only connect the projector to a Video source device using just one of the above connecting methods, however each provides a different level of video quality. The method you choose will most likely depend upon the availability of matching terminals on both the projector and the Video source device as described below:

Best video quality

The best available video connection method is Component Video (not to be confused with composite Video). Digital TV tuner and DVD players output Component Video natively, so if available on your devices, this should be your connection method of choice in preference to (composite) Video.

See "Connecting a Component Video source device" on page 16 for how to connect the projector to a component video device.

Better video quality

The S-Video method provides a better quality analog video than standard composite Video. If you have both composite Video and S-Video output terminals on your Video source device, you should elect to use the S-Video option.

See "Connecting an S-Video source device" on page 17 for how to connect the projector to an S-Video device.

Least video quality

Composite Video is an analog video and will result in a perfectly acceptable, but less than optimal result from your projector, being the least video quality of the available methods described here.

See "Connecting a composite Video source device" on page 18 for how to connect the projector to a composite Video device.

Connecting audio

The projector has one built-in mono speaker which is designed to provide basic audio functionality accompanying data presentations for business purposes only. They are not designed for, nor intended for stereo audio reproduction use as might be expected in home theater or home cinema applications. Any stereo audio input (if provided), is mixed into a common mono audio output through the projector speaker.

Connection 15

Connecting a Component Video source device

Examine your Video source device to determine if it has a set of unused Component Video output sockets available:

• If so, you can continue with this procedure.

• If not, you will need to reassess which method you can use to connect to the

device.

To connect the projector to a Component Video source device:

1. Take a Component Video to VGA (D-Sub) adaptor cable and connect the end with 3 RCA type connectors to the Component Video output sockets of the Video source device. Match the color of the plugs to the color of the sockets; green to green, blue to blue, and red to red.

2. Connect the other end of the Component Video to VGA (D-Sub) adaptor cable (with a D-Sub type connector) to the D-SUB IN socket on the projector.

3. If you wish to make use of the projector (mixed mono) speaker in your presentations, take a suitable audio cable and connect one end of the cable to the audio output socket of the device, and the other end to the AUDIO socket of the projector. Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Adjusting the sound" on page 34 for details.

The final connection path should be like that shown in the following diagram:

AV device

Component Video to VGA (D-Sub) adaptor

Audio cable

cable

• The projector is only capable of playing mixed mono audio, even if a stereo audio input is

connected. See "Connecting audio" on page 15 for details.

• If the selected video image is not displayed after the projector is turned on and the correct

video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.

Connection16

Connecting an S-Video source device

Examine your Video source device to determine if it has an unused S-Video output socket available:

• If so, you can continue with this procedure.

• If not, you will need to reassess which method you can use to connect to the

device.

To connect the projector to an S-Video source device:

1. Take an S-Video cable and connect one end to the S-Video output socket of the Video source device.

2. Connect the other end of the S-Video cable to the S-VIDEO socket on the projector.

The final connection path should be like that shown in the following diagram:

AV device

Audio cable

S-Video cable

• The projector is only capable of playing mixed mono audio, even if a stereo audio input is

connected. See "Connecting audio" on page 15 for details.

• If the selected video image is not displayed after the projector is turned on and the correct

video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.

• If you have already made a Component Video connection between the projector and this

S-Video source device using Component Video connections, you need not connect to this device using an S-Video connection as this makes an unnecessary second connection of poorer picture quality. See "Connecting Video source devices" on page 15 for details.

Connection 17

Connecting a composite Video source device

Examine your Video source device to determine if it has a set of unused composite Video output sockets available:

• If so, you can continue with this procedure.

• If not, you will need to reassess which method you can use to connect to the

device.

To connect the projector to a composite Video source device:

1. Take a Video cable and connect one end to the composite Video output socket of the Video source device.

2. Connect the other end of the Video cable to the VIDEO socket on the projector.

Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Adjusting the sound" on page 34 for details.

The final connection path should be like that shown in the following diagram:

AV device

Audio cable

Video cable

• The projector is only capable of playing mixed mono audio, even if a stereo audio input is

connected. See "Connecting audio" on page 15 for details.

• If the selected video image is not displayed after the projector is turned on and the correct

video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.

• You need only connect to this device using a composite Video connection if Component

Video and S-Video inputs are unavailable for use. See "Connecting Video source devices"

on page 15 for details.

Connection18

Operation

Starting up the projector

1. Plug the power cord into the projector and into a wall socket. Turn on the wall socket switch (where fitted). Check that the POWER indicator light on the projector lights orange after power has been applied.

2. Remove the lens cap. If it is closed, it could become deformed due to the heat produced by the projection lamp.

3. Press POWER on the projector or

• If the projector is still hot from previous activity, it will run the cooling fan for

approximately 90 seconds before energizing the lamp.

• To maintain the lamp life, once you turn the projector on, wait at least 5 minutes before

turning it off.

4. If you are prompted for a password, press the arrow keys to enter a six-digit

5. Switch all of the connected equipment on.

6. The projector will start to search for input signals. The current input signal

If the frequency/resolution of the input signal exceeds the projector's operating range, you will see the message 'Out of Range' displayed on a blank screen. Please change to an input signal which is compatible with the projector's resolution or set the input signal to a lower setting. See "Timing chart" on page 52 for details.

remote control to start the projector. The POWER indicator light flashes green and stays green when the projector is on.

The start up procedure takes about 30 seconds. In the later stage of start up, a startup logo is projected.

(If necessary) Rotate the focus ring to adjust the image clearness.

password. See "Utilizing the password function" on page 21 for details.

being scanned displays in the upper left corner of the screen. If the projector doesn't detect a valid signal, the message 'No Signal' will continue displaying until an input signal is found.

You can also press SOURCE on the projector or remote control to select your desired input signal. See "Switching input signal" on page 23 for details.

Operation 19

Using the menus

The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings.

Below is the overview of the OSD menu.

Main menu icon

Main menu

Highlight

Sub-menu

Current input signal

Wall Color

Aspect Ratio

Keystone

Position Phase

H. Size

Digital Zoom

Analog RGB

DISPLAY

Off

Auto

ENTER

MENU Exit

Press MENU/ EXIT to the

previous page or to exit.

To use the OSD menus, please set them to your familiar language first.

1. Press MENU/EXIT on the projector or remote control to turn the OSD menu on.

3. Press to highlight Language and press /

to select a preferred language.

Wall Color Aspect Ratio Keystone Position Phase H. Size Digital Zoom

Analog RGB

2. Use / to highlight the SYSTEM SETUP: Basic menu.

DISPLAY

Off

Auto

MENU Exit

SYSTEM SETUP: Basic

Presentation Timer

Projector Position Auto Power Off Blank Timer Panel Key Lock Timer Controller Splash Screen

Analog RGB

4. Press MENU/EXIT twice* on the projector or remote control to leave and save the

SYSTEM SETUP: Basic

Presentation Timer

Projector Position Auto Power Off Blank Timer Panel Key Lock Timer Controller Splash Screen

EnglishLanguage

Front Table

Disable Disable

Off Disable InFocus

settings.

*The first press leads you back to the main menu and the second press closes the OSD menu.

Status

EnglishLanguage

Front Table

Disable Disable

Disable

InFocus

Off

MENU Exit

Analog RGB

MENU Exit

Operation20

Utilizing the password function

For security purposes and to help prevent unauthorized use, the projector includes an option for setting up password security. The password can be set through the On-Screen Display (OSD) menu. For details of the OSD menu operation, please refer to "Using the menus" on page 20.

You will be inconvenienced if you activate the password functionality and subsequently forget the password. Print this reference guide (if necessary) and write the password you used in this guide, and keep it in a safe place for later use.

Setting a password

Once a password has been set, the projector cannot be used unless the correct password is entered every time the projector is started.

1. Open the OSD menu and go to the SYSTEM SETUP: Advanced > Security Settings menu. Press MODE/ENTER. The Security Settings page displays.

2. Highlight Power on lock and select On by pressing / .

3. As pictured to the right, the four arrow keys ( , , , ) respectively represent 4

digits (1, 2, 3, 4). According to the password you desire to set, press the arrow keys to enter six digits for the password.

4. Confirm the new password by re-entering the new password. Once the password is set, the OSD menu returns to the Security Settings page.

The digits being input will display as asterisks onscreen. Write your selected password down here in this reference guide in advance or right after the password is entered so that it is available to you should you ever forget it.

Password: __ __ __ __ __ __

Keep this reference guide in a safe place.

5. To leave the OSD menu, press MENU/EXIT.

INPUT NEW PASSWORD

BackMENU

If you forget the password

If the password function is activated, you will be asked to enter the six-digit password every time you turn on the projector. If you enter the wrong password, the password error message as pictured to the right displays lasting for three seconds, and the message 'INPUT PASSWORD' follows. You can retry by entering another six-digit password, or if you did not record the password in this reference guide, and you absolutely do not remember it, you can use the password recall procedure. See

"Entering the password recall procedure" on page 22 for details.

If you enter an incorrect password 5 times in succession, the projector will automatically shut down in a short time.

Password Error

Please try again.

Operation 21

Entering the password recall procedure

1. Press and hold AUTO on the projector or remote control for 3 seconds. The projector will display a coded number on the screen.

2. Write down the number and turn off your projector.

3. Seek help from the local service center to decode the number. You may be required to provide proof of purchase documentation to verify that you are an authorized user of the projector.

RECALL PASSWORD

Please write down the recall code, and contact InFocus Customer Center.

Recall code:

0 2 1 2

Changing the password

1. Open the OSD menu and go to the SYSTEM SETUP: Advanced > Security Settings > Change password menu.

2. Press MODE/ENTER. The message 'INPUT CURRENT PASSWORD' displays.

3. Enter the old password.

• If the password is correct, another message 'INPUT NEW PASSWORD'

displays.

• If the password is incorrect, the password error message displays lasting

for three seconds, and the message 'INPUT CURRENT PASSWORD' displays for your retry. You can press MENU/EXIT to cancel the change or try another password.

4. Enter a new password.

The digits being input will display as asterisks on-screen. Write your selected password down here in this reference guide in advance or right after the password is entered so that it is available to you should you ever forget it.

Password: __ __ __ __ __ __

Keep this reference guide in a safe place.

5. Confirm the new password by re-entering the new password.

6. You have successfully assigned a new password to the projector. Remember to enter the new password next time the projector is started.

7. To leave the OSD menu, press MENU/EXIT.

Exit

Disabling the password function

To disable password protection, go back to the SYSTEM SETUP: Advanced > Security Settings > Power on lock menu after opening the OSD menu system.

Select Off by pressing / . The message 'INPUT PASSWORD' displays. Enter the current password.

• If the password is correct, the OSD menu returns to the Security

Settings page with 'Off' shown in the row of Power on lock. You will not have to enter the password next time you turn on the projector.

• If the password is incorrect, the password error message displays lasting

for three seconds, and the message 'INPUT PASSWORD' displays for

Operation22

your retry. You can press MENU/EXIT to cancel the change or try another password.

Though the password function is disabled, you need to keep the old password in hand should you ever need to re-activate the password function by entering the old password.

Switching input signal

The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a time.

Be sure the Quick Auto Search function in the SOURCE menu is On (which is the default of this projector) if you want the projector to automatically search for the signals.

You can also manually cycle through the available input signals.

1. Press SOURCE on the projector or remote control. A source selection bar displays.

2. Press / until your desired signal is selected and press MODE/ENTER. Once detected, the selected source information will display on the screen for seconds. If there is multiple equipment connected to the projector, repeat steps 12 to search for another signal.

• The brightness level of the projected image will

change accordingly when you switch between different input signals. Data (graphic) "PC" presentations using mostly static images are generally brighter than "Video" using mostly moving images (movies).

• The input signal type effects the options available for the Preset Mode. See "Selecting a

picture mode" on page 28 for details.

• The native display resolution of this projector is in a 4:3 aspect ratio. For best display

picture results, you should select and use an input signal which outputs at this resolution. Any other resolutions will be scaled by the projector depending upon the 'aspect ratio' setting, which may cause some image distortion or loss of picture clarity. See "Selecting

the aspect ratio" on page 26 for details.

aerA

35.0mm

emaNledoM

/OGOL

mm0.54

D-Sub / Comp.

Video

S-Video

Operation 23

Adjusting the projected image

Adjusting the projection angle

The projector is equipped with 1 quick-release adjuster foot and 1 rear adjuster foot. These adjusters change the image height and projection angle. To adjust the projector:

1. Press the quick-release button and lift the front of the projector. Once the image is positioned where you want it, release the quick-release button to lock the foot in position.

2. Screw the rear adjuster foot to fine tune the horizontal angle.

To retract the foot, hold up the projector while pressing the quick-release button, then slowly lower the projector. Screw the rear adjuster foot in a reverse direction.

If the projector is not placed on a flat surface or the screen and the projector are not perpendicular to each other, the projected image becomes trapezoidal. To correct this situation, see "Correcting keystone" on page 25 for details.

• Do not look into the lens while the lamp is on. The strong light from the lamp may cause

damage to your eyes.

• Be careful when you press the adjuster button as it is close to the exhaust vent where hot

air comes from.

Auto-adjusting the image

In some cases, you may need to optimize the picture quality. To do this, press AUTO on the projector or remote control. Within 3 seconds, the built-in Intelligent Auto Adjustment function will re-adjust the values of Frequency and Clock to provide the best picture quality.

The current source information will be displayed in the upper left corner of the screen for 3 seconds.

• The screen will be blank while AUTO is functioning.

• This function is only available when PC signal (analog RGB) is selected.

Operation24

Fine-tuning the image size and clarity

1. Adjust the projected image to the size that you need using the zoom ring.

2. Then sharpen the image by rotating the focus ring.

Correcting keystone

Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen.

To correct this, besides adjusting the height of the projector, you will need to manually correct it following one of these steps.

• Using the remote control

Press / on the projector or remote control to display the Keystone correction page. Press

to correct keystoning at the top of the image. Press to correct keystoning at the bottom of the image.

• Using the OSD menu

1. Press MENU/EXIT and then press /

until the

2. Press to highlight Keystone and

press MODE/ENTER. The Keystone correction page displays.

3. Press to correct keystoning at the top

of the image or press to correct keystoning at the bottom of the image.

DISPLAY menu is highlighted.

Press /.

Operation 25

Magnifying and searching for details

If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys for navigating the picture.

• Using the remote control

1. Press Digital Zoom +/- to display the

Zoom bar.

2. Press Digital Zoom + to magnify the

center of the picture. Press the key repeatedly until the picture size is suitable for your need.

3. Use the directional arrows ( , , , )

on the projector or remote control to navigate the picture.

4. To restore the picture to its original size, press AUTO. You can also press

Digital Zoom -. When the key is pressed again, the picture is further reduced until it is restored to the original size.

• Using the OSD menu

1. Press MENU/EXIT and then press / until the DISPLAY menu is

highlighted.

2. Press

3. Repeat steps 2-4 in the section of "Using the remote control" above. Or if you

4. Press on the projector repeatedly to magnify the picture to a desired size.

5. To navigate the picture, press MODE/ENTER to switch to the paning mode

6. Use the directional arrows ( , , , ) on the projector or remote control

7. To reduce size of the picture, press MODE/ENTER to switch back to the zoom

The picture can only be navigated after the picture is magnified. You can further magnify the picture while searching for details.

to highlight Digital Zoom and press MODE/ENTER. The Zoom bar

displays.

are using the projector control panel, continue to the following steps.

and press the directional arrows ( , , , ) to navigate the picture.

to navigate the picture.

in/out functionality, and press AUTO to restore the picture to its original size. You can also press repeatedly until it is restored to the original size.

Selecting the aspect ratio

The 'aspect ratio' is the ratio of the image width to the image height. Most analog TV and computers are in 4:3 ratio, which is the default for this projector, and digital TV and DVDs are usually in 16:9 ratio.

With the advent of digital signal processing, digital display devices like this projector can dynamically stretch and scale the image output to a different aspect than that of the image input signal.

To change the projected image ratio (no matter what aspect the source is):

1. Press MENU/EXIT and then press / until the DISPLAY menu is

highlighted.

2. Press

Operation26

to highlight Aspect Ratio.

3. Press / to select an aspect ratio to suit the format of the video signal and

your display requirements.

About the aspect ratio

In the pictures below, the black portions are inactive areas and the white portions are active areas. OSD menus can be displayed on those unused black areas.

1. Auto: Scales an image proportionally to fit the

projector's native resolution in its horizontal width. This is suitable for the incoming image which is neither in 4:3 nor 16:9 and you want to make most use of the screen without altering the image's aspect ratio.

Real: The image is projected as its original

resolution, and resized to fit within the display area. For input signals with lower resolutions, the projected image will display smaller than if resized to full screen. You could adjust the zoom setting or move the projector towards the screen to increase the image size if necessary. You may also need to refocus the projector after making these adjustments.

3. 4:3: Scales an image so that it is displayed in

the center of the screen with a 4:3 aspect ratio. This is most suitable for 4:3 images like computer monitors, standard definition TV and 4:3 aspect DVD movies, as it displays them without aspect alteration.

4. 16:9: Scales an image so that it is displayed in

the center of the screen with a 16:9 aspect ratio. This is most suitable for images which are already in a 16:9 aspect, like high definition TV, as it displays them without aspect alteration.

16:10 picture

15:9 picture

4:3 picture

16:9 picture

4:3 picture

16:9 picture

Operation 27

Optimizing the image

Selecting a picture mode

The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input signal picture type.

To select a operation mode that suits your need, you can follow one of the following steps.

• Press MODE/ENTER on the remote

control or projector repeatedly until your desired mode is selected.

• Go to the PICTURE > Preset Mode menu and press / to select a desired

mode.

Picture modes for different types of signals

The picture modes available for different types of signals are listed below.

PC input signals: D-Sub / Comp. (analog RGB)

1. Brightest mode (Default): Maximizes the brightness of the projected image.

This mode is suitable for environments where extra-high brightness is required, such as using the projector in well lit rooms.

2. Presentation mode: Is designed for presentations. The brightness is

emphasized in this mode to match PC and notebook coloring.

3. Photo mode: Maximizes the purity of RGB colors to provide true-to-life

images regardless of brightness setting. It is most suitable for viewing photos taken with an sRGB compatible and properly calibrated camera, and for viewing PC graphic and drawing applications such as AutoCAD.

4. Cinema mode: Is appropriate for playing colorful movies, video clips from

digital cameras or DVs through the PC input for best viewing in a blackened (little light) environment.

5. User 1/User 2 mode: Recalls the settings customized based on the current

available picture modes. See "Setting the User 1/User 2 mode" on page 29 for details.

Video input signals: S-Video, Video, D-Sub / Comp. (YPbPr)

1. Brightest mode: Is suitable for playing gamebox-based video games in a

normal living room lighting level environment.

2. Standard mode (Default): Is appropriate for viewing colorful movies, video

clips from digital cameras or DVs.

3. Cinema mode: Is suitable for enjoying dark movies or DVD movies best

viewed in a blackened (little light) home cinema or lounge room environment.

4. User 1/User 2 mode: Recalls the settings customized based on the current

available picture modes. See "Setting the User 1/User 2 mode" on page 29 for details.

aerA

35.0mm

emaNledoM

/OGOL

mm0.54

Operation28

Setting the User 1/User 2 mode

There are two user-definable modes if the current available picture modes are not suitable for your need. You can use one of the picture modes (except the User 1/ User 2) as a starting point and customize the settings.

1. Press MENU/EXIT to open the On-Screen Display (OSD) menu.

2. Go to the PICTURE > Preset Mode menu.

3. Press / to select User 1 to User 2.

4. Press to highlight Reference Mode.

This function is only available when User 1, or User 2 mode is selected up in the Preset Mode sub-menu item.

5. Press / to select a picture mode that is closest to your need.

6. Press to select a sub-menu item to be changed and adjust the value with

/ . See "Fine-tuning the image quality in user modes" below for details.

7. When all settings have been done, highlight Save Settings and press MODE/

ENTER to store the settings.

8. The confirmation message 'Setting Saved' displays.

Using Wall Color

In the situation where you are projecting onto a colored surface such as a painted wall which may not be white, the Wall Color feature can help correct the projected picture’s color to prevent possible color difference between the source and projected pictures.

To use this function, go to the DISPLAY > Wall Color menu and press / to select a color which is the closest to the color of the projection surface. There are several precalibrated colors to choose from: Light Yellow, Pink, Light Green,

Blue, and Blackboard.

Fine-tuning the image quality in user modes

According to the detected signal type, there are some user-definable functions available when User 1 or User 2 mode is selected. You can make adjustments to these functions based on your needs.

Adjusting Brightness

Highlight Brightness in the PICTURE menu and adjust the values by pressing /

on the projector or remote control.

The higher the value, the brighter the image. And lower the setting, darker the image. Adjust this control so the black areas of the image appear just as black and that detail in the dark areas is visible.

+30

Adjusting Contrast

Highlight Contrast in the PICTURE menu and adjust the values by pressing / on the projector or remote control.

The higher the value, the greater the contrast. Use this to set the peak white level after you have previously adjusted the Brightness setting to suit your selected input and viewing environment.

+30

+50

Operation 29

+70

-30

Adjusting Color

Highlight Color in the PICTURE menu and adjust the values by pressing / on the projector or remote control.

Lower setting produces less saturated colors. If the setting is too high, colors on the image will be overpowering, which makes the image unrealistic.

Adjusting Tint

Highlight Tint in the PICTURE menu and adjust the values by pressing / on the projector or remote control.

The higher the value, the more reddish the picture becomes. The lower the value, the more greenish the picture becomes.

Adjusting Sharpness

Highlight Sharpness in the PICTURE menu and adjust the values by pressing /

on the projector or remote control.

The higher the value, the sharper the picture becomes. The lower the value, the softer the picture becomes.

Adjusting Brilliant Color

Highlight Brilliant Color in the PICTURE menu and select by pressing / on the projector or remote control.

This feature utilizes a new color-processing algorithm and system level enhancements to enable higher brightness while providing truer, more vibrant colors in picture. It enables a greater than 50% brightness increase in mid-tone images, which are common in video and natural scenes, so the projector reproduces images in realistic and true colors. If you prefer images with that quality, select On. If you don’t need it, select Off.

On is the default and recommended selection for this projector. When Off is selected, the Color Temperature function is not available.

Selecting a Color Temperature

Highlight Color Temperature in the PICTURE menu and adjust the values by pressing / on the projector or remote control.

The options available for color temperature* settings vary according to the signal type selected.

1. T1: With the highest color temperature, T1 makes the image appear the most

bluish white than other settings.

2. T2: Makes images appear bluish white.

3. T3: Maintains normal colorings for white.

4. T4: Makes images appear reddish white.

*About color temperatures:

There are many different shades that are considered to be "white" for various purposes. One of the common methods of representing white color is known as the “color temperature”. A white color with a low color temperature appears to be reddish white. A white color with a high color temperature appears to have more blue in it.

Operation30

3D Color Management

In most installation situations, color management will not be necessary, such as in classroom, meeting room, or lounge room situations where lights remain on, or where building external windows allow daylight into the room.

Only in permanent installations with controlled lighting levels such as boardrooms, lecture theaters, or home theaters, should color management be considered. 3D Color Management provides fine color control adjustment to allow for more accurate color reproduction, should you require it.

Proper color management can only be achieved under controlled and reproducible viewing conditions. You will need to use a colorimeter (color light meter), and provide a set of suitable source images to measure color reproduction. These tools are not provided with the projector, however, your projector supplier should be able to provide you with suitable guidance, or even an experienced professional installer.

3D Color Management provides six sets (RGBCMY) of colors to be adjusted. When you select each color, you can independently adjust its range and saturation according to your preference.

If you have purchased a test disc which contains various color test patterns and can be used to test the color presentation on monitors, TVs, projectors, etc. You can project any image from the disc on the screen and enter the 3D Color Management menu to make adjustments.

To adjust the settings:

1. Go to the PICTURE menu and highlight 3D Color Management.

2. Press MODE/ENTER and the 3D Color Management page displays.

3. Highlight Primary Color and press / to select a color from among Red,

Yellow, Green, Cyan, Blue, or Magenta.

4. Press to highlight Hue and press / to select its range. Increase in the

range will include colors consisted of more proportions of its two adjacent colors.

Please refer to the illustration to the right for how the colors relate to each other. For example, if you select Red and set its range at 0, only pure red in the projected

RED

picture will be selected. Increasing its range will include red close to yellow and red close to magenta.

5. Press to highlight Saturation and

adjust its values to your preference by pressing / . Every adjustment made

will reflect to the image immediately. For example, if you select Red and set its value at 0, only the saturation of pure red will be affected.

6. Press to highlight Gain and adjust its values to your preference by

pressing / . The contrast level of the primary color you select will be affected. Every adjustment made will reflect to the image immediately.

7. Repeat steps 3 to 6 for other color adjustments.

8. Make sure you have made all of the desired adjustments.

Magenta

Yellow

BLUE

GREEN

Cyan

Operation 31

9. Press MENU/EXIT to exit and save the settings.

Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a setting of “0” removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic.

Setting the presentation timer

The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function:

1. Go to the SYSTEM SETUP: Basic >

Presentation Timer menu and press MODE/ENTER to display the Presentation Timer page.

2. Highlight Timer Period and decide the time

period by pressing / . The length of time can be set from 1 to 5 minutes in 1-minute increments and 5 to 240 minutes in 5-minute increments.

If the timer is already on, the timer will restart whenever the Timer Period is reset.

3. Press to highlight Timer Display and choose if you want the timer to show

up on the screen by press

ing / .

Selection Description

Always Displays the timer on screen throughout the presentation time.

1 min/2 min/3 min Displays the timer on screen in the last 1/2/3 minute(s).

Never Hides the timer throughout the presentation time.

4. Press to highlight Timer Position and set the timer position by pressing

Top-Left Bottom-Left Top-Right Bottom-Right

5. Press to highlight Timer Counting Direction and select your desired

counting direction by pressing / .

Selection Description

Count Up Increases from 0 to the preset time.

Count Down Decreases from the preset time to 0.

Presentation Timer

Timer Period Timer Display Timer Position Timer Counting Direction

Sound Reminder

On Off

Always

Top-Left

Count Down

Off

MENU Back

6. Press to highlight Sound Reminder and decide if you want to activate

sound reminder by pressing / . If you select On, a double beep sound will be heard at the last 30 seconds of counting down/up, and a triple beep sound will be produced when the timer is up.

7. To activate the presentation timer, press and press / to highlight On

and press MODE/ENTER.

8. A confirmation message displays. Highlight Yes and press MODE/ENTER to

confirm. You will see the message “Timer is On” displaying on the screen. The timer starts counting at the time the timer is on.

Operation32

To cancel the timer, perform the following steps.

1. Enter the SYSTEM SETUP: Basic > Presentation Timer menu and highlight

Off. Press MODE/ENTER. A confirmation message displays.

2. Highlight Yes and press MODE/ENTER to confirm. You will see the message

“Timer is Off” displaying on the screen.

Hiding the image

In order to draw the audience's full attention to the presenter, you can use BLANK on the projector or remote control to hide the screen image. Press any key on the projector or remote control to restore the image. The word 'BLANK' appears at the lower right corner of the screen while the image is hidden.

You can set the blank time in the

SETUP: Basic > Blank Timer

SYSTEM

menu to let the projector return the image

automatically after a period of time when there is no action taken on the blank screen.

Once BLANK is pressed, the projector enters Economic mode automatically.

CAUTION

Do not block the projection lens from projecting as this could cause the blocking object to become heated and deformed or even cause a fire.

Locking control keys

With the control keys on the projector locked, you can prevent your projector settings from being changed accidentally (by children, for example). When the Panel Key Lock is on, no control keys on the projector will operate except

POWER.

1. Press / on the projector or remote

control or go to the

Basic > Panel Key Lock menu

SYSTEM SETUP:

, and

select On by pressing / on the projector or remote control.

2. A confirmation message displays. Select

Yes to confirm.

aerA

35.0mm

emaNledoM

/OGOL

mm0.54

To release panel key lock, press and hold / for 3 seconds on the projector or remote control.

You can also use the remote control to enter the SYSTEM SETUP: Basic > Panel Key Lock and press / to select Off.

• Keys on the remote control are still in use when panel key lock is enabled.

• If you press POWER to turn off the projector without disabling panel key lock, the

projector will still be in locked status the next time it is turned on.

Operation 33

Freezing the image

Press on the remote control to freeze the image. The word 'FREEZE' will display in the upper left corner of the screen. To release the function, press any key on the projector or remote control.

Even if an image is frozen on the screen, the pictures are running on the video or other device. If the connected devices have active audio output, you will still hear the audio even though the image is frozen on screen.

Operating in a high altitude environment

We recommend you use the High Altitude Mode when your environment is between 1500 m–3000 m above sea level, and temperature is between 0°C–35°C.

CAUTION

Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and temperature is between 0°C and 35°C. The projector will be over cooled, if you turn the mode on under such condition.

To activate the High Altitude Mode:

1. Press MENU/EXIT and then press /

until the SYSTEM SETUP: Advanced menu is highlighted.

2. Press to highlight High Altitude Mode

and press / to select On. A confirmation message displays.

3. Highlight Yes and press MODE/ENTER. Operation under "High Altitude Mode" may cause a higher decibel operating noise

level because of increased fan speed necessary to improve overall system cooling and performance.

If you use this projector under other extreme conditions excluding the above, it may display auto shut-down symptoms, which is designed to protect your projector from over-heating. In cases like this, you should switch to High Altitude Mode to solve these symptoms. However, this is not to state that this projector can operate under any and all harsh or extreme conditions.

WARNING

We recommend you use the High Altitude Mode by selecting it whenever your environment is higher than 1500 m. Do you want to turn the High Altitude Mode on?

Yes

Adjusting the sound

The sound adjustments made as below will have an effect on the projector speaker. Be sure you have made a correct connection to the projector audio input. See

"Connection" on page 13 for how the audio input is connected.

Muting the sound

To temporarily turn off the sound:

1. Press MENU/EXIT and then press / until the SYSTEM SETUP:

Advanced menu is highlighted.

2. Press to highlight Audio Settings and press MODE/ENTER. The Audio

Settings page displays.

3. Highlight Mute and press / to select On.

Operation34

Adjusting the sound level

To adjust the sound level:

1. Repeat steps 1-2 above.

2. Press to highlight Volume and press / to select a desired sound level.

Personalizing the projector menu display

The On-Screen Display (OSD) menus can be set according to your preferences. The following settings do not affect the projection settings, operation, or performance.

• Menu display time in the SYSTEM SETUP: Advanced > Menu Settings

menu sets the length of time the OSD will remain active after your last key press. The time length ranges from 5 to 30 seconds in 5-second increments.

Use / to select a suitable time frame.

• Menu position in the SYSTEM SETUP: Advanced > Menu Settings menu

sets the OSD position in five locations. Use / to select a preferred position.

• Language in the SYSTEM SETUP: Basic menu sets your familiar language for

the OSD menus. Use / to select your language.

• Splash Screen in the SYSTEM SETUP: Basic menu sets a preferred logo

screen to be displayed during projector start-up. Use / to select a screen.

Shutting down the projector

1. Press POWER and a confirmation

2. Press POWER a second time. The

3. The POWER indicator light is a steady

4. Disconnect the power cord from the wall

CAUTION

• To protect the lamp, the projector will not respond to any commands during the cooling

process.

• To shorten the cooling time, you can also activate the Quick Cooling function. See "Quick

Cooling" on page 40 for details.

• Do not unplug the power cord before the projector shutdown sequence is complete or

during the 90-second cooling down process.

• If the projector is not properly shut down, to protect the lamp, when you attempt to re-start

the projector, the fans will run for a few minutes to cool down. Press POWER again to start the projector after the fans stop and the POWER indicator light turns orange.

message displays prompting you. If you don't respond in a few seconds, the

message will disappear.

POWER indicator light flashes orange, the projection lamp shuts down, and the fans will continue to run for approximately 90 seconds to cool down the projector.

orange and fans stop.

socket if the projector will not be used in an extended period of time.

Operation 35

Menu operation

Menu system

Please note that the on-screen display (OSD) menus vary according to the signal type selected.

The menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu items are accessible.

Main menu Sub-menu Options

Off/Light Yellow/Pink/Light Green/Blue/Blackboard

Bottom-right/Top-right/Bottomleft/Top-left

Count Down/Count Up

1. DISPLAY

2. PICTURE

3. SOURCE

4. SYSTEM SETUP: Basic

Wall Color

Aspect Ratio Auto/Real/4:3/16:9 Keystone Position Phase H. Size Digital Zoom

PC source: Brightest/Presentation/Photo/Cinema/

Preset Mode

Reference Mode

Brightness Contrast Color Tint Sharpness Brilliant Color On/Off Color Temperature T1/T2/T3/T4

3D Color Management

Save Settings

Quick Auto Search On/Off

Presentation Timer

User 1/User 2 Video source: Brightest/Standard/Cinema/User 1/ User 2

PC source: Brightest/Presentation/Photo/Cinema Video source: Brightest/Standard/Cinema

Primary Color R/G/B/Y/C/M Hue Saturation Gain

Timer Period 1~240 minutes Timer Display Always/1 min/2 min/3 min/Never

Timer Position

Timer Counting Direction

Sound Reminder On/Off On/Off

Operation36

Language

4. SYSTEM SETUP: Basic

5. SYSTEM SETUP: Advanced

6. INFORMATI ON

Projector Position

Auto Power Off

Blank Timer

Panel Key Lock On/Off

Timer Controller

Splash Screen Black/Blue/InFocus

Quick Cooling On/Off

High Altitude Mode On/Off

Audio Settings

Menu Settings

Closed Caption

VGA Out On/Off

Lamp Settings

Security Settings

Reset All Settings

Current System Status

Mute On/Off

Volume

Menu display time

Menu position

Closed Caption Enable

Caption Version CC1/CC2/CC3/CC4

Lamp mode Normal/Economic

Reset lamp timer

Equivalent lamp hour

Change password

Power on lock On/Off

Front Table/Rear Table/Rear Ceiling/Front Ceiling

Disable/5 min/10 min/15 min/20

min/25 min/30 min

Disable/5 min/10 min/15 min/20 min/25 min/30 min

Disable/30 min/1 hr/2 hr/3 hr/4 hr/8 hr/12 hr

5 sec/10 sec/15 sec/20 sec/25 sec/30 sec

Center/Top-left/Top-right/Bottomright/Bottom-left

On/Off

• Source

• Preset Mode

• Resolution

• Color System

• Equivalent Lamp Hour

Operation 37

Description of each menu

FUNCTION

(default setting/ value)

Wall Color

(Off)

Aspect Ratio

(Auto)

Keystone

1. DISPLAY menu

(0)

Position

(0)

Phase

(depends on the selected input signal)

H. Size

(0)

Digital Zoom

(1.0X)

Preset Mode

(PC source: Brightest; Video source:

2. PICTURE menu

Standard)

Reference Mode

(Brightest)

Brightness

(50)

DESCRIPTION (default setting/value)

Corrects the projected picture’s color when the projection surface is not white. See "Using Wall Color" on page 29 for details.

There are four options to set the image's aspect ratio depending on your input signal source. See "Selecting the

aspect ratio" on page 26 for details.

Corrects any keystoning of the image. See "Correcting

keystone" on page 25 for details.

Displays the position adjustment page. To move the projected image, use the directional arrow keys. The values shown on the lower position of the page change with every key press you made until they reach their maximum or minimum.

Adjusts the clock phase to reduce image distortion.

Adjusts the horizontal width of the image.

Magnifies or reduces the projected image. See "Magnifying and

searching for details" on page 26 for details.

Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See

"Selecting a picture mode" on page 28 for details.

Selects a picture mode that most suits your need for the image quality and further fine-tune the image based on the selections listed on the same page below. See "Setting the User 1/User 2

mode" on page 29 for details.

Adjusts the brightness of the image. See "Adjusting Brightness"

on page 29 for details.

Contrast

(0)

Color

(0)

Operation38

Adjusts the degree of difference between dark and light in the image. See "Adjusting Contrast" on page 29 for details.

Adjusts the color saturation level -- the amount of each color in a video image. See "Adjusting Color" on page 30 for details.

FUNCTION

(default setting/ value)

Tint

(0)

Sharpness

2. PICTURE menu

(15)

DESCRIPTION (default setting/value)

Adjusts the red and green color tones of the image. See

"Adjusting Tint" on page 30 for details.

The function is only available when Video or S-Video with NTSC system is selected.

Adjusts the image to make it look sharper or softer. See

"Adjusting Sharpness" on page 30 for details.

Brilliant Color

(On)

Color Temperature

(T1)

3D Color Management

Save Settings

3. SOURCE

Quick Auto Search

(On)

4. SYSTEM SETUP: Basic

Presentation Timer

(Off)

Language

(English)

Projector Position

(Front Table)

Adjusts white peaking while maintaining correct color presentation. See "Adjusting Brilliant Color" on page 30 for details.

See "Selecting a Color Temperature" on page 30 for details.

See "3D Color Management" on page 31 for details.

Saves the settings made for User 1 or User 2 mode.

See "Switching input signal" on page 23 for details.

Reminds the presenter to finish the presentation within a certain time frame. See "Setting the presentation timer" on

page 32 for details.

Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 20 for details.

The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See "Choosing a location" on page

9 for details.

Auto Power Off

(Disable)

Allows the projector to turn off automatically if no input signal is detected after a set period of time. See "Setting Auto Power

Off" on page 44 for details.

Operation 39

FUNCTION

(default setting/ value)

Blank Timer

4. SYSTEM SETUP: Basic

(Disable)

Panel Key Lock

(Off)

DESCRIPTION (default setting/value)

Sets the image blank time when the Blank feature is activated, once elapsed the image will return to the screen. See "Hiding

the image" on page 33 for details.

Disables or enables all panel key functions except POWER on the projector and keys on the remote control. See "Locking

control keys" on page 33 for details.

Timer Controller

(Disable)

Splash Screen

(InFocus logo)

5. SYSTEM SETUP: Advanced menu Quick

Cooling

(On)

High Altitude Mode

(Off)

Audio Settings

Menu Settings

Sets the auto-shutdown timer. The timer can be set to a value between 30 minutes and 12 hours.

Allows you to select which logo screen will display during projector start-up. Three options are available: InFocus logo, Black screen, or Blue screen.

Selecting On enables the function and the projector cooling time will be shortened to a few seconds.

If you attempt to restart the projector right after the quick cooling process, it may not be turned on successfully and will rerun its cooling fans.

A mode for operation in high altitude areas. See "Operating in a

high altitude environment" on page 34 for details.

Mute (Off) Volume (5)

See "Adjusting the sound" on page 34 for details.

Menu display time (15 sec)

Sets the length of time the OSD will remain active after your last key press. The range is from 5 to 30 seconds in 5-second increments.

Menu position (Center)

Sets the On-Screen Display (OSD) menu position.

Operation40

FUNCTION

(default setting/ value)

Closed Caption

5. SYSTEM SETUP: Advanced menu

VGA Out

(Off)

Lamp Settings

Security Settings

Reset All Settings

DESCRIPTION (default setting/value)

Closed Caption Enable (Off)

Activates the function by selecting On when the selected input signal carries closed captions.

• Captions: An on-screen display of the dialogue, narration, and sound effects of TV programs and videos that are closed captioned (usually marked as "CC" in TV listings).

Caption Version (CC1)

Selects a preferred closed captioning mode. To view captions, select CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary language in your area).

Selecting On enables the function. The projector can output a VGA signal when it is in standby mode and the D-SUB IN and D-SUB OUT sockets are correctly connected to devices. See

"Connecting a monitor" on page 14 for how to make the

connection.

Enabling this function slightly increases the standby power consumption.

Lamp mode (Normal)

See "Setting Lamp mode as Economic" on page 44 for details.

Reset lamp timer

See "Resetting the lamp timer" on page 48 for details.

Equivalent lamp hour

ee "Getting to know the lamp hour" on page 44 for details

on how the total lamp hour is calculated.

Change password

You will be asked to enter the current password before changing to a new one.

Power on lock (Off)

See "Utilizing the password function" on page 21 for details.

Returns all settings to the factory preset values.

The following settings will still remain: Position, Phase, H. Size, User 1, User 2, Language, Projector Position, High Altitude Mode, Security Settings.

Operation 41

FUNCTION

(default setting/ value)

6. INFORMATION menu

Current System Status

DESCRIPTION (default setting/value)

Source

Shows the current signal source.

Preset Mode Shows the selected mode in the PICTURE menu.

Resolution

Shows the native resolution of the input signal.

Color System

Shows input system format, NTSC, PAL, SECAM, or RGB.

Equivalent Lamp Hour

Displays the number of hours the lamp has been used.

Operation42

Maintenance

Care of the projector

Your projector needs little maintenance. The only thing you need to do on a regular basis is to keep the lens clean.

Never remove any parts of the projector except the lamp. Contact your dealer if other parts need replacing.

Cleaning the lens

Clean the lens whenever you notice dirt or dust on the surface.

• Use a canister of compressed air to remove dust.

• If there is dirt or smears, use lens-cleaning paper or moisten a soft cloth with lens cleaner and gently wipe the lens surface.

CAUTION

Never rub the lens with abrasive materials.

Cleaning the projector case

Before you clean the case, turn the projector off using the proper shutdown procedure as described in "Shutting down the projector" on page 35 and unplug the power cord.

• To remove dirt or dust, wipe the case with a soft, lint-free cloth.

• To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral pH detergent. Then wipe the case.

CAUTION

Never use wax, alcohol, benzene, thinner or other chemical detergents. These can damage the case.

Storing the projector

If you need to store the projector for an extended time, please follow the instructions below:

• Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please refer to "Specifications" on page

51 or consult your dealer about the range.

• Retract the adjuster feet.

• Remove the battery from the remote control.

• Pack the projector in its original packing or equivalent.

Transporting the projector

It is recommended that you ship the projector with its original packing or equivalent.

Maintenance 43

Lamp information

Getting to know the lamp hour

When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer. The method of calculating the equivalent lamp hour is as follows:

Total (equivalent) lamp hour = 1 (hours used in Economic mode) + 4/3 (hours used in Normal mode)

See "Setting Lamp mode as Economic" below for more information on Economic mode.

The lamp hour in Economic mode is calculated as 3/4 of that in Normal mode. That is, using the projector in Economic mode helps to extend the lamp hour by 1/

To obtain the lamp hour information:

1. Press MENU/EXIT and then press / until the SYSTEM SETUP:

Advanced menu is highlighted.

2. Press to highlight Lamp Settings and press MODE/ENTER. The Lamp

Settings page displays.

3. You will see the Equivalent lamp hour information displaying on the menu.

4. To leave the menu, press MENU/EXIT.

You can also get the lamp hour information on the INFORMATION menu.

Extending lamp life

The projection lamp is a consumable item that normally can last up to 3000-4000 hours with proper usage. To keep the lamp life as long as possible, you can do the following settings via the OSD menu.

Setting Lamp mode as Economic

Using Economic mode reduces system noise and power consumption by 20%. If the Economic mode is selected, the light output will be reduced and result in darker projected pictures.

Setting the projector in Economic mode also extends the lamp operation life. To set Economic mode, go into the SYSTEM SETUP: Advanced > Lamp Settings >

Lamp mode menu and press / .

Setting Auto Power Off

This function allows the projector to turn off automatically if no input source is detected after a set period of time to prevent unnecessary waste of lamp life.

To set Auto Power Off, go into the SYSTEM SETUP: Basic > Auto Power Off menu and press / . The time period can be set from 5 to 30 minutes in 5-minute increments. If the preset time lengths are not suitable for your presentation, select Disable. The projector will not automatically shut down in a certain time period.

Maintenance44

Timing of replacing the lamp

When the Lamp indicator lights up red or a message appears suggesting it is time to replace the lamp, please install a new lamp or consult your dealer. An old lamp may cause a malfunction in the projector and in some instances the lamp may explode.

CAUTION

The Lamp indicator light and Temperature warning light will light up if the lamp becomes too hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp or Temp indicator still lights up after turning the power back on, please contact your dealer. See "Indicators" on

page 49 for details.

The following lamp warning displays will remind you to change the lamp.

Status Message

The lamp has been in operation for 3000 hours. Install a new lamp for optimal performance. If the projector is normally run with Economic selected (See "Setting Lamp

mode as Economic" on page 44), you may

continue to operate the projector until the 3950 hour lamp warning appears.

Notice

Order Replacement Lamp

Lamp > 3000 Hours

The lamp has been in operation for 3950 hours. A new lamp should be fitted to avoid the inconvenience when the projector runs out of lamp time.

The lamp has been in operation for 4000 hours.

It is strongly recommended that you replace the lamp at this age. The lamp is a consumable item. The lamp brightness diminishes with use. This is normal lamp behavior. You can replace the lamp whenever you notice that the brightness level has significantly diminished. If the lamp is not replaced beforehand, it must be replaced after 4000 hours usage.

The lamp MUST be replaced before the projector will operate normally.

Notice

Replace Lamp Soon

Lamp > 3950 Hours

Notice

Replace Lamp Now

Lamp > 4000 Hours Lamp usage time exceeded

Notice

Lamp-usage time exceeded

Replace lamp (refer to Reference Guide) Then reset lamp timer

Maintenance 45

Replacing the lamp

WARNING

Hg - Lamp contains mercury. Manage in accordance with local disposal laws. See www.lamprecycle.org

• To reduce the risk of electrical shock, always turn the projector off and disconnect the power cord before changing the lamp.

• To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before replacing the lamp.

• To reduce the risk of injuries to fingers and damage to internal components, use caution when removing lamp glass that has shattered into sharp pieces. Before replacing the lamp, clean the lamp compartment and dispose of cleaning materials. Be careful of sharp edges in the lamp compartment. Wash hands after lamp replacement.

• Only InFocus certified lamps are tested with this projector. Use of other lamps may cause electrical shock and fire.

1. Turn the power off and disconnect

the projector from the wall socket. If the lamp is hot, avoid burns by waiting for approximately 45 minutes until the lamp has cooled.

2. Turn the projector over. Then

loosen the screws on the lamp cover.

3. Remove the lamp cover from the

projector.

WARNING

• Do not turn the power on with the lamp cover removed.

• Do not insert your fingers between the lamp and the projector. The sharp edges inside the projector may cause injuries.

4. Loosen the screw that secures the

lamp.

Maintenance46

5. Pull out the lamp connector from a

slot in the lamp compartment. Disconnect it from the projector as illustrated.

6. Lift the handle so that it stands up.

Use the handle to slowly pull the lamp out of the projector.

CAUTION

• Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector.

• Do not place the lamp in locations where water might splash on it, children can reach it, or near flammable materials.

• Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images.

7. Insert the new lamp into the

lamp compartment and make sure it fits in the projector.

8. Reconnect the lamp

connector and place it back into its slot to be flush with the projector.

Maintenance 47

9. Tighten the screw that secures the

lamp.

CAUTION

• Loose screw may cause a bad connection, which could result in malfunction.

• Do not over tighten the screw.

10. Ensure the handle is fully laid flat

and locked in place.

11. Replace the lamp cover on the

projector.

12. Tighten the screws that secure the

lamp cover.

CAUTION

• Loose screw may cause a bad connection, which could result in malfunction.

• Do not over tighten the screws.

13. Restart the projector.

CAUTION

Do not turn the power on with the lamp cover removed.

Resetting the lamp timer

14. After the startup logo, open the On-

Screen Display (OSD) menu. Go to the

SYSTEM SETUP: Advanced > Lamp Settings menu. Press MODE/ENTER.

The Lamp Settings page displays. Press to highlight Reset lamp timer and press MODE/ENTER. A warning message displays asking if you want to reset the lamp timer. Highlight Reset and press MODE/ENTER. The lamp time will be reset to '0'.

CAUTION

Do not reset if the lamp is not new or replaced as this could cause damage.

Maintenance48

Notice

Reset Lamp Timer?

Reset

Cancel

Indicators

Light Status & Description

Power Temp Lamp

Power events

Orange Orange Orange

Orange Off Off

Green

Flashing

Green Off Off

Orange

Flashing

Orange

Flashing

Off Off

Lamp events

Orange

Flashing

Off Off Red

Off Red

Thermal events

Off Red Off

Off Red Red

Off Red Green

Off Red Orange

Red Red Red

Red Red Green

Red Red Orange

Green Red Red

Green Red Green

Green Red Orange

Orange Red Red

Orange Red Green

Orange Red Orange

Off Green Red

Off Green Green

The projector has just been connected to a power outlet.

Stand-by mode

Powering up

Normal operation

1. The projector needs 90 seconds to cool down as it was abnormally shut down without the normal cooling down process. Or

2. The projector needs to cool for 90 seconds after the power is turned off.

The projector has shutdown automatically. If you try to re-start the projector, it will shutdown again. Please contact your dealer for assistance.

1. The projector needs 90 seconds to cool down. Or

2. Please contact your dealer for assistance.

The projector has shutdown automatically. If you try to re-start the projector, it will shutdown again. Please contact your dealer for assistance.

Maintenance 49

Troubleshooting

The projector does not turn on.

Cause Remedy

There is no power from the power cable.

Attempting to turn the projector on again during the cooling process.

No picture

Cause Remedy

The video source is not turned on or connected correctly.

The projector is not correctly connected to the input signal device.

The input signal has not been correctly selected.

The lens cover is still closed. Open the lens cover.

Blurred image

Cause Remedy

The projection lens is not correctly focused.

The projector and the screen are not aligned properly.

The lens cover is still closed. Open the lens cover.

Plug the power cord into the AC inlet on the projector, and plug the power cord into the power outlet. If the power outlet has a switch, make sure that it is switched on.

Wait until the cooling down process has completed.

Turn the video source on and check that the signal cable is connected correctly.

Check the connection.

Select the correct input signal with the SOURCE key on the projector or remote control.

Adjust the focus of the lens using the focus ring.

Adjust the projection angle and direction as well as the height of the unit if necessary.

Remote control does not work

Cause Remedy

The battery is out of power. Replace the battery with new one.

There is an obstacle between the remote control and the projector.

You are too far away from the projector.

Remove the obstacle.

Stand within 8 meters (26 feet) of the projector.

The password is incorrect

Cause Remedy

You do not remember the password.

Troubleshooting50

Please see "Entering the password recall

procedure" on page 22 for details.

Specifications

Projector specifications

All specifications are subject to change without notice.

General

Product name Digital Projector Model name X16 X17

Optical

Resolution 800 x 600 SVGA 1024 x 768 XGA Display system 1-CHIP DMD Lens F/Number F = 2.56 to 2.8, f = 21 to 23 mm Lamp 185 W lamp

Electrical

Power supply AC100–240V, 2.9 A, 50/60 Hz (Automatic) Power consumption 285 W (Max)

Mechanical

Dimensions 264 mm (W) x 113 mm (H) x 225 mm (D) Weight 5.29 lbs (2.4 Kg)

Input terminal

Computer input RGB input D-Sub 15-pin (female) x 1 Video signal input S-VIDEO Mini DIN 4-pin port x 1 VIDEO RCA jack x 1 SD/HDTV signal input Analog – D-Sub <–> Component RCA jack x 3

Output terminal

RGB output D-Sub 15-pin (female) x 1 Speaker 5 watt x 1

Control terminal

RS-232 serial control 9 pin x 1

Environmental Requirements

Operating temperature 0°C–40°C at sea level Operating relative

humidity Operating altitude • 0–1499 m at 0°C–35°C

(through RGB input)

10%–90% (without condensation)

• 1500–3000 m at 0°C–30°C (with High Altitude Mode on)

Specifications 51

Dimensions

264 mm (W) x 113 mm (H) x 225 mm (D)

264

225

113

Timing chart

Supported timing for PC input

Horizontal

Resolution

640 x 480

720 x 400 31.469 70.087 28.3221 720 x 400_70

800 x 600

1024 x 768

1280 x 800 49.65 59.96 83.458 SXGA_60

1280 x 1024 63.981 60.020 108.000 SXGA3_60

1280 x 960 60.000 60.000 108 1280 x 960_60 640 x 480@67Hz 35.000 66.667 30.240 MAC13 832 x 624@75Hz 49.722 74.546 57.280 MAC16

1024 x 768@75Hz 60.241 75.020 80.000 MAC19 1152 x 870@75Hz 68.68 75.02 100.00 MAC21

Frequency

(kHz)

31.469 59.940 25.175 VGA_60

37.861 72.809 31.500 VGA_72

37.500 75.000 31.500 VGA_75

43.269 85.008 36.000 VGA_85

37.879 60.317 40.000 SVGA_60

48.077 72.188 50.000 SVGA_72

46.875 75.000 49.500 SVGA_75

53.674 85.061 56.250 SVGA_85

48.363 60.004 65.000 XGA_60

56.476 70.069 75.000 XGA_70

60.023 75.029 78.750 XGA_75

68.667 84.997 94.500 XGA_85

Ver tical

Frequency

(Hz)

Pixel

Frequency

(MHz)

Mode

Specifications52

Supported timing for Component-YPbPr input

Signal Format Horizontal Frequency (kHz) Vertical Frequency (Hz)

480i(525i)@60Hz 15.73 59.94

480p(525p)@60Hz 31.47 59.94

576i(625i)@50Hz 15.63 50.00 576p(625p)@50Hz 31.25 50.00 720p(750p)@60Hz 45.00 60.00 720p(750p)@50Hz 37.50 50.00

1080i(1125i)@60Hz 33.75 60.00 1080i(1125i)@50Hz 28.13 50.00

Displaying a 1080i(1125i)@60Hz or 1080i(1125i)@50Hz signal may result in slight image vibration.

Supported timing for Video and S-Video inputs

Video mode

NTSC 15.73 60 3.58

PAL 15.63 50 4.43

SECAM 15.63 50 4.25 or 4.41

PAL-M 15.73 60 3.58

PAL-N 15.63 50 3.58

PAL-60 15.73 60 4.43

NTSC4.43 15.73 60 4.43

Horizontal

Frequency (kHz)

Vertical Frequency

(Hz)

Color sub-carrier

Frequency (MHz)

Specifications 53

Copyright information

Copyright 2008 by InFocus Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of InFocus Corporation.

Disclaimer

InFocus Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, InFocus Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes.

*DLP and Digital Micromirror Device (DMD) are trademarks of Texas Instruments. Others are copyrights of their respective companies or organizations.

InFocus X17, X16 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Table of contents

Introduction

Projector features

Shipping contents

Standard accessories

Optional accessories

Projector exterior view

Controls and functions

Projector and remote control

Positioning your projector

Choosing a location

Obtaining a preferred projected image size

How to determine the position of the projector for a given screen size

How to determine the recommended screen size for a given distance

Projection dimensions

Connection

Connecting a computer or monitor

Connecting a computer

Connecting a monitor

Connecting Video source devices

Connecting a Component Video source device

Connecting an S-Video source device

Connecting a composite Video source device

Operation

Starting up the projector

Using the menus

Utilizing the password function

Setting a password

If you forget the password

Entering the password recall procedure

Changing the password

Disabling the password function

Switching input signal

Adjusting the projected image

Adjusting the projection angle

Auto-adjusting the image

Fine-tuning the image size and clarity

Correcting keystone

Magnifying and searching for details

Selecting the aspect ratio

Optimizing the image

Selecting a picture mode

Using Wall Color

Fine-tuning the image quality in user modes

Setting the presentation timer

Hiding the image

Locking control keys

Freezing the image

Operating in a high altitude environment

Adjusting the sound

Personalizing the projector menu display

Shutting down the projector

Menu operation

Menu system

Description of each menu

Maintenance

Care of the projector

Cleaning the lens

Cleaning the projector case

Storing the projector

Transporting the projector

Lamp information

Getting to know the lamp hour

Extending lamp life

Timing of replacing the lamp

Replacing the lamp

Indicators

Troubleshooting

Specifications

Projector specifications

Dimensions

Timing chart

Copyright information