InFocus IN2100 User Manual

Quick Start

Guide de Démarrage Rapide
Schnellstart-Anleitung
Guía de Inicio Rápido
Guida di Consultazione Rapida
Snelstartgids
Guia de Início Rápido
Snabbstarthandbok

Краткое руководство

⾔⪬G㐐㣅G㙼⇨㉐

ᖿ䗳ܹ䮼ᣛ

Panduan Ringkas

010-0734-02 !*010-0734-02*

DISPERINDAG No. 0287/1.824.51/09.03

Regulatory model V2000 and M2100

2

3

1

Please read the safety instructions booklet

!

before setting up the projector.

Unpack the box

1

USB Cable Computer Cable

Here’s what’s included:

Projector Remote Carry Case

Power Cable

Save the box and packing materials.

Put batteries in the remote

2

The remote uses 2 AA batteries.

Please dispose of batteries in an environmentally proper manner.

Buy a Full-Featured Remote and Other Custom Accessories

Status Indicator Panel

The top of your projector includes
a convenient indicator panel with
symbols that light up to show
important status.

For details, see Troubleshooting.

www.infocus.com/store

Power/Standby Service Required

High Temperature Replace Lamp

Connect source

Audio Out

L R

Video

Out

S-Video

Out

3

Color-coded connections make it easy.
You can connect more than one source if needed.

Connect to: Computer

Computer Cable (included)

Computer

OR

Got an Apple computer?

You may need an adapter. For more
information, see How-To Guides at
www.infocus.com/support/howto

Connect to: DVD, VCR

1 Connect video using a Composite Video cable or an S-Video cable

www.infocus.com/store part no. SP-CPSTVID-5M or SP-SVIDEO-10M

2 Connect audio using a Mini Plug Audio Y-Cable

Available from A/V dealer or retailer

OR

Composite Video Cable

S-Video Cable

Mini Plug Audio Y-Cable

*Also for game console or cable

box.





DVD or VCR*

Good

Better

OR

Connect to: Other kinds of sources

How-To Guides are available at www.infocus.com/support/howto

!

i

4

Turn on projector and source

Connect the power cord to the

1

projector and to an electrical
outlet

The power light on the projector will light amber.

Slide open the lens cover

2

Turn on the projector

3

Touch the power light (or press power on the remote).
The power light will start blinking green.

Wait for the lamp to warm up

4

After a few seconds, the power light will stop blinking

5-10 sec.

and turn green. It can take a minute for the lamp to
reach full brightness.

Warning: Do not look directly into the lens while

the projector is being used.

Turn on computer or other source

5

You may need to press a specic key combination to activate
your laptop’s external video port. On most laptops, hold
down the FN key while pressing a key labeled CRT/LCD, LCD/
VGA, a monitor icon , or similar. Key combos for popular
models:

Apple F7 HP/Compaq Fn+F4 or Fn+F6 Sony Fn+F7
Dell Fn+F8 IBM ThinkPad Fn+F7 Toshiba Fn+F5
Fujitsu Fn+F10
Complete laptop activation chart at www.infocus.com/support

Important: If there is still no video, restart your

computer (rst make sure it’s connected to the
projector and the projector is turned on).

source

Change source if needed

6

If needed, press source (on the projector or remote)
to view the source. You may have to press it more than
once.

1

2

Adjust the picture

5

Height

1

1 Hold down the release button

under the front of the projector.

2 Lift the front of the projector to

the desired height.

3 Release the button.

Keystone

2

keystone

Press the keystone buttons to make
the picture square.

Zoom and focus

3

Zoom
(rear)

focus
(front)

Projector Location

As distance increases, the
image gets larger and
moves upwards.

Lens center line

Diagonal

Screen Size

60" / 1.5m 6.48’ / 1.98m 7.80’ / 2.38m
80" / 2m 8.64’ / 2.63m 10.40’ / 3.17m
90" /2.286m 9.72’ / 2.96m 11.70’ / 3.57m
150" / 3.8m 16.20’ / 4.94m 19.50’ / 5.94m

60" / 1.5m 6.21’ / 1.89m 7.74’ / 2.36m
80" / 2m 8.34’ / 2.54m 10.36’ / 3.16m
90" / 2.286m 9.40’ / 2.86m 11.68’ / 3.56m
150" / 3.8m 15.77’ / 4.81m 19.55’ / 5.96m

Interactive Screen Size and Distance

www.infocus.com/calculator

Distance to Screen

Minimum Maximum

IN2112 and IN2114

IN2116

Calculator

Adjust zoom rst, then focus the
center of the image.

Buy a Screen and Other Accessories

www.infocus.com/store

Need Help?

help

Press the Help button at
any time to get help with
connecting sources and
improving the picture.

To ip the image, turn on the Ceiling

Ceiling mount?

Mount setting in the Setup menu.

Using the menus

1 Press menu, then press or to review menus.
2 Press select to enter a menu, then press or to review

settings.

3 Press select to change a setting. If this shows more choices,

press or to update the setting, then press select or menu
to save it.

4 Press menu to go back. Press it again to remove the menu.

Note: Most picture settings are disabled (gray) unless a source is being displayed.

Controlling your presentations

Connect the USB cable between the projector and your computer (see step 3), then press

and to move through your presentation slides.

Note: Most picture settings are disabled (gray) unless a source is being displayed.

Use LitePort Source

6

7

(IN2114 and IN2116 only)

View photos from a USB ash drive

Copy JPEG pictures to a USB ash drive, then plug the drive
into the projector’s LitePort connector. The slideshow starts
automatically. Press arrow keys to change slides, press select
to see thumbnails and change folders, press select again to
return to the slideshow.

Turn o the projector

Press the power button

The power light on the projector will blink while the fan cools
the lamp. If you need to unplug the projector, wait until the
fan stops and the power light stops blinking and stays on.

Note: While the power light is blinking, button presses on the
projector and remote are ignored.

READ THE REFERENCE GUIDE

(

)

Download it at www.infocus.com/support

The Reference Guide is available in multiple languages. It covers advanced setup and operation,

including instructions for LAN/network functions (IN2114 & IN2116 only) and lamp replacement.

TROUBLESHOOTING

auto image

auto image

source

!

(

)

If there is no picture or the picture is blank

If the power light is o, make sure the power cord is connected and plugged into a live
electrical outlet. If the power light is amber and not blinking, touch the power light (or
press power on the remote).

Check video source and cables. Make sure the video source (computer, DVD player, VCR,
etc.) is turned on and cables are securely connected between the source and the projector.

If your computer is connected using DisplayLink (not VGA), please see the DisplayLink
Manager User’s Guide for more troubleshooting information.

Make sure your computer’s video port is enabled. Press the key combination that activates
your laptop’s external video port (see step 4). If there is still no image, restart your laptop.

Press the Source button. You may need to press it several times to view the correct
source.

Press the Auto Image button.

If “Signal out of range” is shown, or the picture looks bad

Press the Auto Image button. If that doesn’t help (and the source is a computer), reduce
your computer’s display resolution or vertical refresh rate.

If the replace lamp light is on

Turn the projector o and wait at least one minute, then turn it on again. If the replace
lamp light turns on again, the lamp needs to be replaced. For lamp replacement
instructions, see the Reference Guide, which can be downloaded at

www.infocus.com/support

Only InFocus genuine lamps are tested for use in this projector.

If the high temperature light is on

Turn the projector o and remove anything that may be blocking the air vents on
its side. Leave the projector o for at least one minute to let it cool before turning it on
again. Important: Continuous operation at high temperature may reduce the lifetime of
the lamp and/or projector.

If the service required light is on

Turn the projector o and wait at least one minute, then turn it on again. If the
service required light turns on again, the projector needs to be serviced. See below for
service contact information.

More troubleshooting options are in the Reference Guide

Download it at www.infocus.com/support

Warning: In the unlikely event of a lamp rupture, particles may be ejected from the
projector. Keep out of the area under and around the projector while the projector is in
use. See the safety instructions booklet for more details.

Questions? We’re here to help!

Visit us at: www.infocus.com/support

We’re here to support you with your new purchase. We can help you with…

• Determining screen sizes

• Documentation in other languages

• Connecting your sources (TV, DVD, Cable/Satellite, Game, etc.)

• Selecting optional accessories

• Product warranty protection plans

USA, Canada, Latin America
Customer Support Telephone
[phone]
TOLL FREE: 877-388-8360
Mon-Fri, 6 am – 5 pm Pacic

Asia Pacic
Customer Support Telephone
Singapore: 65-6603-9871
China: 800-888-9288
Australia: 1300-290-922
Australia Direct Sales: 61430-223-138
New Zealand: 008000-4636287
Mon-Fri, 9 am - 5 pm SGT
[e-mail]

Europe, Middle East, Africa
Customer Support Telephone
France: 0800 905-993
Germany: 0800 181-3649
Italy: 0800 877-238
Spain: 900 993-163
UK: 0800 028-6470
Other: 008000 463-6287
Mon-Fri, 08:00 - 17:00 CET
[e-mail]

Hg - Lamp contains mercury. Manage in accordance with local disposal laws.
See www.lamprecycle.org

Declaration of Conformity
Manufacturer: InFocus Corporation, 13190 SW 68th Parkway, Suite 200, Portland, Oregon 97223-8368 USA
We declare under our sole responsibility that this projector conforms to the following directives and norms: EuP Directive: 2005/32/
EC, EMC Directive 2004/108/EC, EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3, Low Voltage Directive 2006/95/EC, Safety: IEC
60950-1:2005(MOD).

Trademarks
Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. IBM is a trademark or registered
trademark of International Business Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered trademarks of
Microsoft Corporation. Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated. DLP® and the DLP
logo are registered trademarks of Texas Instruments and BrilliantColor™ is a trademark of Texas Instruments. InFocus, In Focus, and INFOCUS
(stylized) are either registered trademarks or trademarks of InFocus Corporation in the United States and other countries.

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Changes or modications to this equipment that are not expressly approved by InFocus Corp. may void the user’s authority to operate the
equipment.

Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Agency Approvals
cMETus. Other specic Country Approvals may apply. Please see product certication label.

Input ratings: 100-240Vac, 2.5A, 50-60Hz

InFocus reserves the right to alter product oerings and specications at any time without notice.