InFocus IN112, IN114, IN116 User Manual

Regulatory model IN112/IN114/IN116

P/N PA139-4000-00
DISPERINDAG No. 0287/1.824.51/09.03

2 31

Please read the safety instructions

TEMP/LAMP

POWER

booklet before setting up the projector.

Unpack the box

1

2

Here's what's included:

Projector

Computer Cable

Save the box and packing materials.

Power Cable

Remote

Documentation Pack

Put batteries in the remote

The remote uses 2 AAA batteries.

Please dispose of batteries in an environmentally proper manner.

Buy a Full-Featured Remote and Other Custom Accessories

Status Indicator Panel

The top of your projector includes
a convenient indicator panel with
symbols that light up to show
important status.

For details, see Troubleshooting.

www.infocus.com/store

Video Out

HDMI Out

Audio Out

L R

Connect source

3

Color-coded connections make it easy.
You can connect more than one source if needed.

Connect to: Computer (using VGA)

Computer Cable (included)

Computer

OR

Got an Apple computer?

You may need an adapter. For more
information, see How-To Guides at
www.infocus.com/support/howto

Connect to: DVD, VCR

Connect video using either a Composite Video cable, an S-Video cable

1

or an HDMI cable
Connect audio using a Mini Plug Audio Y-Cable

2

Available from A/V dealer or retailer

(not needed for HDMI)

HDMI Cable

S-Video Cable

OR

Composite Video Cable





Mini Plug Audio Y-Cable

(not needed for HDMI)



Best

Better

Good

*Also for game console, cable box,
HDTV Receiver

OR

DVD, VCR*

i

5-10 sec.

4

Turn on projector and source

Connect the power cord to the projector

1

and to an electrical outlet

The power light on the projector will light blue.

Turn on the projector

2

Press power (on the projector or remote).
The power light will light blue.

Wait for the lamp to warm up

3

It will take a minute for the lamp to reach full brightness.

Warning:

projector is being used.

Turn on computer or other source

4

You may need to press a speci c key combination to activate

your laptop's external video port. On most laptops, hold
down the FN key while pressing a key labeled CRT/LCD, LCD/
VGA, a monitor icon , or similar. Key combos for popular
models:

Apple F7 HP/Compaq Fn+F4 or Fn+F6 Sony Fn+F7
Dell Fn+F8 IBM ThinkPad Fn+F7 Toshiba Fn+F5
Fujitsu Fn+F10

Complete laptop activation chart at www.infocus.com/support

Important:

computer ( rst make sure it's connected to the

projector and the projector is turned on).

Change source if needed

5

If needed, press

and to highlight the desired source, and press the

on the projector (or

different source.

Do not look directly into the lens while the

If there is still no video, restart your

SOURCE

(on the projector or remote), use

SELECT

on the remote) to choose a

2

1

5

Adjust the picture

Height

1

Lift the front of the projector to

1

the desired height.
Rotate the foot under the front

2

of the projector.

Keystone

2

keystone

Press the keystone buttons to make
the picture square.

Need Help?

Press the Help button on the
remote at any time to get help
with connecting sources and
improving the picture.

Interactive Screen Size and Distance

Calculator

www.infocus.com/calculator

Buy a Screen and Other Custom

Accessories

www.infocus.com/store

Ceiling mount?

To ip the image, turn on the

setting in the

Mount

Basic

Ceiling

menu.

Zoom and focus

3

Adjust zoom rst, then focus the

center of the image.

Zoom

Focus

SOURCE

PRESET

TEMP/LAMP

POWER

Using the menus

6

Press

1

options.
To enter a submenu, highlight the desired submenu and

2

press on the projector or
To adjust a menu setting, highlight the desired menu

3

option and press or .
Press the

4

Most picture settings are disabled (gray) unless a source is being

Note:

displayed.

, then press or to review the menu

MENU

Select

button to exit the menu system.

MENU

Turn off the projector

Press the power button

The power light on the projector will blink while the fan cools
the lamp. If you need to unplug the projector, wait until the
fan stops.

on remote.

Note: While the power light is blinking, button presses on the
projector and remote are ignored.

READ THE REFERENCE GUIDE

Download it at www.infocus.com/support

The Reference Guide is available in multiple languages. It covers advanced setup and

operation, including lamp replacement instructions.

TROUBLESHOOTING

TEMP/LAMP

POWER

If there is no picture or the picture is blank

If the power light is off,

into a live electrical outlet, and then press the
remote.

Check video source and cables.

player, VCR, etc.) is turned on and cables are securely connected between the
source and the projector.

Make sure your computer's video port is enabled.

that activates your laptop's external video port (see step
image, restart your laptop.

Press the SOURCE button

highlight the desired source. Then press the on the keypad (or the
button on the remote) to activate the source.

Press the Auto Image button.

make sure the power cord is connected and plugged

POWER

Make sure the video source (computer, DVD

on the projector or remote and use

button on the keypad or

Press the key combination

4

). If there is still no

and to

SELECT

If "Signal out of range" is shown, or the picture looks bad

Press the Auto Image button.

reduce your computer's display resolution or vertical refresh rate.

If that doesn't help (and the source is a computer),

If "Replace lamp" is shown

Turn the projector off and wait at least one minute, then turn it on again. If
the replace lamp message is displayed again, the lamp needs to be replaced.

For lamp replacement instructions,

downloaded at
Only InFocus genuine lamps are tested for use in this projector.

www.infocus.com/support

see the Reference Guide, which can be

If the projector is overheating

Turn the projector off and remove anything that may be blocking the air vents
on its sides.

turning it on again.
reduce the lifetime of the lamp and/or projector.

Leave the projector off for at least one minute to let it cool before

Important:

Continuous operation while overheating may

More troubleshooting options are in the Reference Guide

Download it at www.infocus.com/support

Warning:

the projector. Keep out of the area under and around the projector while the
projector is in use. See the safety instructions booklet for more details.

In the unlikely event of a lamp rupture, particles may be ejected from

Questions? We’re here to help!

Visit us at: www.infocus.com/support

We’re here to support you with your new purchase. We can help you with…

• Determining screen sizes

• Documentation in other languages

• Connecting your sources (TV, DVD, Cable/Satellite, Game, etc.)

• Selecting optional accessories

• Product warranty protection plans

USA, Canada, Latin America

Customer Support Telephone

[phone]

TOLL FREE:

877-388-8360

Mon-Fri, 6 am - 5 pm Pacic

Asia Pacic

Customer Support Telephone
Singapore:
China:
Australia:
Australia Direct Sales:
New Zealand:

65 6603 9871

800-888-9288

1300-290-922

61430-223-138

008000-4636287

Mon – Fri, 9 a.m. – 5 p.m. SGT
[e-mail]

Hg - Lamp contains mercury. Manage in accordance with local disposal laws.
See www.lamprecycle.org

Declaration of Conformity

Manufacturer: InFocus Corporation, 13190 SW 68th Parkway, Suite 200, Portland, OR 97223-8368 USA
We declare under our sole responsibility that this projector conforms to the following directives and norms: ErP Directive 2009/125/
EC, EMC Directive 2004/108/EC, EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3, Low Voltage Directive 2006/95/EC, Safety:
IEC 60950-1: 2005;EN 60950-1:2006 +A11:2009.

Trademarks

Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. IBM is a trademark or registered
trademark of International Business Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered trademarks
of Microsoft Corporation. Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated. DLP® and
the DLP logo are registered trademarks of Texas Instruments and BrilliantColor™ is a trademark of Texas Instruments. InFocus, In
Focus, and INFOCUS (stylized) are either registered trademarks or trademarks of InFocus Corporation in the United States and other
countries.

NOTE: This product is covered electrical and electronic equipment under the European Union's Waste from Electrical and
Electronic Equipment ("WEEE") Directive (2002/96/EC). The WEEE Directive requires that covered equipment be collected and
managed separately from typical household waste in all EU member states. Please follow the guidance of your local
environmental authority or ask the shop where you purchased the product for collection or recycling options.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

Changes or modications to this equipment that are not expressly approved by InFocus Corp. may void the user’s authority to operate

the equipment.

Canada

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB­003 du Canada.

Agency Approvals

cULus. Other specic Country Approvals may apply. Please see product certication label.

Input ratings:

InFocus reserves the right to alter product offerings and specications at any time without notice.

100-240Vac, 2.6A, 50-60Hz

Europe, Middle East, Africa

Customer Support Telephone
France:

0800 905-993

Germany:
Italy:
Spain:
UK:
Other:

0800 181-3649

0800 877-238

900 993-163

0800 028-6470

008000 463-6287

Mon-Fri, 08:00 - 17:00 CET
[e-mail]