Infinity Reference 3022cf, Reference 6022i, Reference 4022i, Reference 5022i, Reference 6022si Specifications

c

a

r

a

u

d

i

o

INFINITY®REFERENCE SPEAKERS

Looking for a more moving audio experience? Take Infinity®car audio for a ride.

Innovative materials and breakthrough engineering have always put Infinity products out

in front of the competition. So expect extreme output from these speakers, but be

prepared for accuracy and detail that may surprise you. Infinity Reference Series

loudspeakers continue to be the top-selling premium speakers in the world. For instance,

the 6-1/2-inch Reference coaxial model has been the number-one-selling car audio

multielement speaker for four years straight. With proprietary features such as patent-

pending Plus One®cones, true 4-ohm topology, UniPivot™(patent no. 6,002,780) edge-driven

tweeters and the industry-leading Intermount III (patent no. 6,505,705) and I-Mount

(patent no. 5,859,917) mounting systems, as well as the Starfish™tweeter-mounting

adapter, Reference Series speakers leave the competition scrambling to keep up.

™

m u l t i e l e m e n t s

PLUS ONE®CONES

This patent-pending technology

delivers a cone with more surface

area than that in competing models

of the same size. This increase can

be as much as 30 percent, depending

on the individual speaker model. The

benefit is increased bass output and

maximized efficiency.

TEXTILE-DOME TWEETERS

TO ENSURE PROPER IMAGING

POLYPROPYLENE WOOFER CONES

TRUE 4-OHM TOPOLOGY

All Reference Series speakers

include reduced voice-coil impedance

to extract the most power possible

from any and all amplifiers designed

to drive loads of 4 ohms or less. Many

factory-installed systems incorporate

2-ohm speakers and include amplifiers

designed to drive those loads. Merely

replacing those reduced-impedance

speakers with conventional 4-ohm

models is hardly an upgrade, since

the power output from the amplifier

will be reduced. True 4-ohm topology

addresses this as well.

EDGE-DRIVEN

UNIPIVOT

PLUS ONE

EDGE-DRIVEN, TEXTILE­DOME TWEETERS

These are not commonly used W-domes,

but fully edge-driven dome tweeters

like those found in better home audio

speakers. The benefit is increased

power handling and reduced

distortion at high output levels.

4022i

4" (100mm) Two-Way Loudspeaker

Plus One®(patent pending) woofer cone

Edge-driven, textile-dome tweeter

2-Ohm impedance

Sensitivity: 92dB

Frequency response: 85Hz – 21kHz

Power handling, RMS: 35 watts

Power handling, peak: 105 watts

5022i

5-1/4" (130mm)
Two-Way Loudspeaker

Plus One®(patent pending) woofer cone

Edge-driven, textile-dome tweeter
with UniPivot™(patent no. 6,002,780)

2-Ohm impedance

Sensitivity: 92dB

Frequency response: 67Hz – 21kHz

Power handling, RMS: 45 watts

Power handling, peak: 135 watts

6022i

6-1/2" (160mm)
Two-Way Loudspeaker

Plus One®(patent pending) woofer cone

Edge-driven, textile-dome tweeter
with UniPivot™(patent no. 6,002,780)

Intermount III (patent no. 6,505,705)
woofer-mounting system

2-Ohm impedance

Sensitivity: 93dB

Frequency response: 53Hz – 21kHz

Power handling, RMS: 60 watts

Power handling, peak: 180 watts

6022si

6-1/2" (160mm ) Two-Way
Shallow-Mount Loudspeaker

Plus One®(patent pending) woofer cone

Edge-driven, textile-dome tweeter

Intermount III (patent no. 6,505,705)
woofer-mounting system

2-Ohm impedance

Sensitivity: 93dB

Frequency response: 53Hz – 21kHz

Power handling, RMS: 50 watts

Power handling, peak: 150 watts

9622i

6" x 9" Two-Way Loudspeaker

Plus One®(patent pending) woofer cone

Edge-driven, textile-dome tweeter with

™

UniPivot

(patent no. 6,002,780)

2-Ohm impedance

Sensitivity: 94dB

Frequency response: 46Hz – 21kHz

Power handling, RMS: 100 watts

Power handling, peak: 300 watts