
System Board User’s Manual
Carte Mère Manuel Pour Utilisateur
System-Platine Benutzerhandbuch
Manual del Usuario de Placas Base
Руководство ПользователяРуководство Пользователя
Руководство Пользователя
Руководство ПользователяРуководство Пользователя
935-CK8045-500
86510523

1
Quick Setup
Quick Setup Guide
Copyright
This publication contains information that is protected by copyright. No part of it
may be reproduced in any form or by any means or used to make any
transformation/adaptation without the prior written permission from the copyright
holders. This publication is provided for informational purposes only. The
manufacturer makes no representations or warranties with respect to the
Guide
contents or use of this manual and specifically disclaims any express or implied
warranties of merchantability or fitness for any particular purpose. The user will
assume the entire risk of the use or the results of the use of this document.
Further, the manufacturer reserves the right to revise this publication and make
changes to its contents at any time, without obligation to notify any person or
entity of such revisions or changes. © 2005. All Rights Reserved.
Trademarks
Product names or trademarks appearing in this manual are for identification
purpose only and are the properties of the respective owners.
Caution
To avoid damage to the system, use the correct AC input voltage range
To reduce the risk of electric shock, unplug the power cord before removing the
system chassis cover for installation or servicing. After installation or servicing,
cover the system chassis before plugging the power cord.
Battery: 1. Danger of explosion if batter y incorrectly replaced. 2. Replace only
with the same or equivalent type recommend
used batteries according to the battery manufacturer’s
Notice
The system board and accessories in the package may not come similar to the
information stated in this manual. This may differ in accordance to the sales region
or models in which it was sold. For more information about the standard
package in your region, please contact your dealer or sales representative.
FCC and DOC Statement on Class B
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to
• Consult the dealer or an experienced radio TV technician for help.
Notice:
1. The changes or modifications not expressly approved by the party
2. Shielded interface cables must be used in order to comply with the emission
..
.
..
by the manufacturer. 3. Dispose of
instructions.
which the receiver is connected.
responsible for compliance could void the user's authority to operate the
equipment.
limits.
2

Table of Contents
Quick Setup Guide
1
Chapter 1
Quick Setup Guide.............................................
Chapter 2
English......................................................................
Chapter 3
Français....................................................................
Chapter 4
Deutsch...............................................................................
Chapter 5
Español............................................................................
Chapter 6
Русский.......................................................................
14
17
20
23
26
4
Guide
Quick Setup
The user’s manual in the provided CD contains detailed information about the system board. If, in some
cases, some information doesn’t match those shown in this manual, this manual should always be regarded as the most updated version.
Le manuel d’utilisateur dans le CD muni contient renseignement détaillé au sujet de carte de système. Si,
en quelque cas, quelque renseignement n’appareille de ce que dit dans ce manuel, ce manuel doit
toujours être considéré comme la plus nouvelle version.
Das Benutzerhandbuch in der angebotenen CD enthält detaillierte Informationen über die Hauptplatine.
Wenn in manchen Fällen manche Informationen nicht denjenigen Informationen dargestellt in diesem
Handbuch entsprechen, soll dieses Handbuch als die meist aktualisierte Ausgabe gelten.
El uso explicativo contene información detalle sobre la sistema board en el CD preparativo. Si en algún
caso, la información no es igual con el uso explicativo, necesita ver el uso explicativo, esque es más
nuevo.
В руководстве пользователя на предоставляемом CD диске содержится подробная
информация о материнской плате. Иногда напечатанное руководство может не
совпадать руководством на CD, так как последнее наиболее часто обновляется и
является самым свежим.
3

1
Quick Setup Guide
Chapter 1 - Quick Setup Guide
System Board Layout
Guide
Quick Setup
4

Jumpers
Clear CMOS Data
PS/2 Power Select
JP2
X
JP7
X
1-2 On: 5V
1-2 On: Normal
(default)
(default)
Quick Setup Guide
312312
2-3 On:
Clear CMOS Data
312312
2-3 On: 5VSB
1
Guide
Quick Setup
Important:
The 5VSB power source of your power supply must support
≥
720mA.
5

1
Quick Setup Guide
USB Power Select
Guide
Quick Setup
System Memory
USB 1-4
(JP5)
USB 5-10
(JP6)
X
(default)
1-2 On: 5V
X
(default)
3
2
1
3
2
1
2-3 On: 5VSB1-2 On: 5V
312312
2-3 On: 5VSB
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2
USB ports, the 5VSB power source of your power supply must
support ≥1.5A. For 3 or more USB ports, the 5VSB power source of
your power supply must support ≥2A.
DDR 3
DDR 2
DDR 1
DDR 3
-
-
-
9
1 DIMM
2 DIMMs
3 DIMMs
DDR 1
DDR 2
9
99
99
Install DIMMs according to the sequence
of the DDR socket indicated in the
illustration. In other words, if you are
installing one DIMM only, you must install it
in DDR 1 and so on. Refer to the table
above.
6

Rear Panel I/O Ports
Quick Setup Guide
1
PS/2
Mouse
PS/2
K/B
S/PDIF-out
Parallel
S/PDIF-in USB 1-2 USB 3-4
COM
I/O Connectors
S/PDIF-out/in and CD-in Connectors
W
S/PDIF-out
S/PDIF-in
Left audio
channel
Ground
Ground
Right audio
channel
1
W
4
CD-in
LAN
Line-in
Line-out
Mic-in
J3
W
+5V
Key
SPDIF out
GND
SPDIF in
Optical
S/PDIF
Guide
Quick Setup
1
5
Note:
DO NOT use RCA S/PDIF and optical S/PDIF at the same time.
7

1
Quick Setup Guide
Universal Serial Bus Ports
Guide
Quick Setup
USB 4
USB 3
FDD and IDE Connectors
USB 2
USB 1
W
W
USB 5-6
USB 7-8
USB 9-10
W
2
1
VCC
VCC
+Data
-Data
-Data
+Data
N. C.
Ground
10
9
Key
Ground
34
33
40
39
40
39
X
X
21
FDD
21
IDE 2
21
IDE 1
8

Audio (Rear Audio and Front Audio)
Rear audio
Line-in
Line-out
Mic-in
W
Quick Setup Guide
Front audio
AuD_L_Out
AuD_R_Out
MicGND
N. C.
W
10
9
Mic Power
1
2
Key
AuD_Vcc
AuD_L_Return
AuD_R_Return
1
Guide
Quick Setup
Light Blue
Lime
Pink
PCI Express Slots
PCI Express x1
PCI Express x1
PCI Express x16
2-channel
Line-in
Line-out
Mic-in
4-channel
Rear R/L
Front R/L
Mic-in
6-channel
Rear R/L
Front R/L
Center/Subwoofer
9

1
Quick Setup Guide
Serial ATA Connectors
Guide
Quick Setup
SATA 1
(J11)
GND
7
RXP
RXN
GND
TXN
TXP
1
GND
17
X
17
SATA 2
(J13)
7
1
GND
RXP
RXN
GND
TXN
TXP
GND
SATA 4
(J10)
SATA 3
(J2)
Important:
Before creating RAID, make sure you have installed the Serial/Parallel
ATA drives and connected the data cables otherwise you won’t be
able to enter the NVIDIA RAID BIOS utility.
10

Quick Setup Guide
IrDA Connector
IRRX
N. C.
Ground
IRTX
51
Note:
The sequence of the pin functions on some IR cable may be
reversed from the pin function defined on the system board. Make
sure to connect the cable connector to the IR connector according to
their pin functions.
VCC
W
1
Guide
Quick Setup
Cooling Fan Connectors
31
Sense
Power
System fan
X
Ground
X
CPU fan
Sense
Power
Ground
Chipset fan
31
Sense
X
Power
3
1
Ground
11

1
Quick Setup Guide
LEDs
Guide
Quick Setup
Power Connectors
DRAM
Power LED
Standby
Power LED
12
+12V
4
3
+12V
Ground
Ground
X
2
1
+3.3VDC
-12VDC
COM
PS_ON#
COM
COM
COM
X
+5VDC
+5VDC
+5VDC
COM
NC
Important:
To ensure that adequate power is provided, we strongly recommend
that you use a minimum of 400 Watt (or greater) power supply.
13 1
+3.3VDC
+3.3VDC
COM
+5VDC
COM
+5VDC
COM
PWR_OK
+5VSB
+12VDC
+12VDC
+3.3VDC
1224

Front Panel Connectors
Quick Setup Guide
ATX-SW
PWR-LED
1
Guide
Quick Setup
HD-LED
(Primary/Secondary IDE LED)
Reserved
ATX-SW
(ATX power switch)
Reserved
RESET
(Reset switch)
SPEAKER
(Speaker connector)
PWR-LED
(Power/Standby LED)
J19
2
X
1
HD-LED
RESET
Pin
Pin Assignment
3
HDD LED Power
5
HDD
14
N. C.
16
N. C.
8
PWRBT+
10
PWRBT-
18
N. C.
20
N. C.
7
Ground
9
H/W Reset
13
Speaker Data
15
N. C.
17
Ground
19
Speaker Power
2
LED Power (+)
4
LED Power (+)
6
LED Power (-) or Standby Signal
20
19
SPEAKER
13