Infinity KAPPA 124.7W, KAPPA 104.7W, KAPPA 122.7W, KAPPA 102.7W User Manual
INFINITY®KAPPA®SUBWOOFERS
Looking for a more moving audio experience? Take Infinity®car audio
for a ride. Innovative materials and breakthrough engineering have
always put Infinity products out in front of the competition. So
expect extreme output from Kappa
accuracy and detail that may surprise you. Infinity Kappa Series
subwoofers incorporate a ton of technological advances that serve
to deliver great-sounding bass in a variety of enclosures.
®
subs, but be prepared for
subwoofers
SELECTABLE IMPEDANCE
This provides easy configuration of
the voice coils. With Kappa subwoofers,
there are no more confusing series and
parallel connections of voice coils,
and the connection of separate woofers
in multisubwoofer systems is easier.
NEODYMIUM MOTOR WITH
ALUMINUM HEATSINK
An aluminum extrusion provides a heatsink
for the motor’s steel parts. Neodymium
provides more magnetic energy in a smaller
space, which reduces overall weight, and is
inherently magnetically shielded.
THREE-INCH-DIAMETER
VOICE COILS
provide plenty of heat-dissipating surface
area for high power handling. Many other
woofers at comparable prices use smaller,
2-inch coils. Kappa woofers handle more power.
VENTED POLEPIECE
reduces air compression under the dust
cap, minimizing mechanical noise, and
provides more constant mechanical Q for
reduced distortion.
MEDIUM Q DESIGN
provides great performance in sealed,
vented or band-pass enclosures. Sealed
enclosures for Kappa woofers can be ±30
percent of the recommended volume.
Optimum vented boxes do not require
superlong ports.
TESTED TO ENSURE
THEY’LL STAND UP
Infinity subwoofers are tested according
to the strictest and most demanding
reliability-testing regimen ever designed
for car audio speakers. They are shaken,
baked, frozen and dropped, all while they’re
operating, and attempts are even made to
destroy them with signals up to 10 times their
rated power. When they’ve passed those tests,
the subs are subjected to their RMS and peak
power limits for 100 hours. Many competing
subs are tested for only eight hours.
EXTRACT ALL THE POWER
FROM ANY AMPLIFIER
Kappa Series subwoofers are available in
two configurations that provide either a
2-ohm or 8-ohm impedance, or 1-ohm or
4-ohm impedance. That’s enough flexibility
to provide an optimum load to any amplifier.
kappa 102.7w
10" (250mm) SelectableImpedance Subwoofer
Woven-glass-fiber woofer cone
Neodymium motor with aluminum heatsink
Impedance selection switch
V
ented polepiece
Impedance: 1 or 4 ohms
Power handling, RMS: 300 watts
Power handling, peak: 900 watts
250 Crossways Park Drive, Woodbury, NY 11797 USA
516.674.4INF (4463) Fax 516.682.3556
www.infinitysyst
© 2008 Harman International Industries, Incorporated.
All rights reserved. Part No. INFKAPSUBPI3-08
Features, specifications and appearance
are subject to change without notice.
Designed, edited and digitally produced by the
Harman Consumer Group Marketing & Design Center,
Woodbury, NY.
Infinity and Kappa are trademarks of
Harman International Industries, Incorporated,
registered in the United States and/or other countries.
ems.com
kappa 104.7w
10" (250mm) SelectableImpedance Subwoofer
Woven-glass-fiber woofer cone
Neodymium motor with aluminum heatsink
Impedance selection switch
V
ented polepiece
Impedance: 2 or 8 ohms
Power handling, RMS: 300 watts
Power handling, peak: 900 watts
kappa 122.7w
12" (300mm) SelectableImpedance Subwoofer
Woven-glass-fiber woofer cone
Neodymium motor with aluminum heatsink
Impedance selection switch
V
ented polepiece
Impedance: 1 or 4 ohms
Power handling, RMS: 300 watts
Power handling, peak: 900 watts
kappa 124.7w
12" (300mm) SelectableImpedance Subwoofer
Woven-glass-fiber woofer cone
Neodymium motor with aluminum heatsink
Impedance selection switch
V
ented polepiece
Impedance: 2 or 8 ohms
Power handling, RMS: 300 watts
Power handling, peak: 900 watts
Loading...