Indesit IWC81051 Schematic

Model type:
IWC81051CECOEU

Commercial code:
78720

General notes

Technical Documentation guidelines

----------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------

You can find herewith some generic information to simplify cunsulting of technical documentation:

1. Models of same range share the same exploded views, which report the richest set of spare parts:generally, a model does not

necessarly have a related spare part for each particular shown on exploded views.

2. Some spare parts can not be represented directly on the exploded views (instruction booklets, specific kit, etc...). You can find

those codes in the spare parts list with the same reference of particular where spares are installed or with references 099, 999.

Instruction booklets, once managed, appear with 000 reference.

3. On the higher right site of each exploded view there is a serial number which indicates the beginning of the production of

certain range:some models might have more than an exploded view for a given category, each distinguished by a different serial

no.and linked to another spare parts list, In this case, serial no. is required to supply the right spare part code. Exploded view to be

considered is the one with a more recent serial no. but previous than the one of the model that needs assistance.

4.Exploded views might require further updates even after publishing. Addition of new spares will go on following the already

existing numeration references. Revision number of an exploded view is shown into last four digits of serial number into upper

right hand corner.

5.The spare parts list associated to an exploded view shows related codes of spares managed for a certain model; for each spare

part other informations are available:

REF: reference no of spare into a table; SUBSTITUTE: list of spare(s) which can replace a code but that keeps same functional

characteristics

INDUSTRIAL CODE: list of variables of a model (shown into model label) where such spare is used; NOTICE: code of

information(s) to refer to complete technical intervention, track for changes or to find correct spare part code.

6. Some notices, into a same section are generic therefore cannot be directly linked to a spare part. In order to assist a model in

the best way as possible, it is helpful to pay attention to all notices and constantly verify documentation updates

7.Technical documentation cover shows model name and its commercial codes

mod.IWC81051CECOEU page

2

1180160N Exploded views

mod.IWC81051CECOEU page

3

1180160N Spare parts

list

Ref. Code From To S/N Substitute Description Notice Industrial

001 C00270552 top cover white(pw) 595x588

002 C00270822 cabinet indesit basic pw rad.

005 C00270548 pushbutton white pw on/off

006 C00283372 1 x C00293476 control led indesit basic 3 knobs

007 C00270601 support display module ecotime

008 C00270550 option button (5) pw indesit

010 C00292206 pw control panel+handle

011 C00270544 wash timer knob white pw pw

012 C00270603 spin/temperat. regulation knob

013 C00270980 door frame and glass assy pw

014 C00270986 door handle kit indesit ecotime

015 C00116556 plinth white

016 C00087084 foot

017 C00083828 foot spring (11x8.5mm)

018 C00046667 wiring stop

018 C00064550 drain hose holder

021 C00267086 rear cover - white pw radom.

022 C00145769 transit bolt

023 C00141387 cable clamp hose

024 C00064755 drain hose collar

025 C00096210 screw self tapping

026 C00255430 door hinge

031 C00112735 cap serial port

099 C00087815 timer screw 1/2 t4,2x12.7

099 C00272394 screw vite plst 3x12 tsp

mod.IWC81051CECOEU page

4