Quick guide
EN
THANK YOU FOR BUYING AN INDESIT PRODUCT
In order to receive a more complete assistance, please
register your product on www . indesit . com/ register
FIRST TIME USE
Wait at least two hours, after the installation, before connecting
the appliance to the power supply. Connect the appliance to the
power supply it starts the operation automatically. The ideal storage
temperatures for the food are preset in the factory.
CONTROL PANEL
1. 2. 3. 1. Temperature Alarm Indicator
ON/STANDBY
Press the button for 3 seconds to turn the appliance o. In Stand-by
mode the light in the refrigerator compartment does not turn on. Press
the button again briey to reactivate the appliance.
Note: this does not disconnect the appliance from the power supply.
TEMPERATURE ALARM INDICATOR
FAST FREEZING
To freeze the compartment quickly or 24
hours before placing large amounts of fresh
food to be frozen, activate the “Fast Freezing”
function by pressing the “Temperature” button
repeatedly until the 3 indicator lights ash and then remain lit.
The function deactivates automatically after 60 hours and the
temperature setting returns to the value prior to activation of the
function. To deactivate the function manually, press the “Temperature”
button.
Note: The food to be frozen must not be touching already frozen food.
Before using the appliance carefully read the Safety
Instruction.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally lled
appliance. Position the antibacterial anti-odour lter in the fan as
demonstrated in the lter packaging (if available). If the audible signal
sounds, it means that the temperature alarm has intervened: press the
button to switch o the acoustic alarms.
2. Fast Freezing
3. Freezer compartment temperature
FREEZER COMPARTMENT TEMPERATURE
The three green lights indicate the set freezer compartment
temperature.
A dierent temperature can be set using the “Temperature”
button.
The following adjustments are possible:
Recommended setting:
- Freezer compartment: -18°C
To avoid food waste, please refer to the recommended setting and storage
times found in the online user manual.
* Available only on certain models
HOW TO STORE FRESH FOOD
FREEZER COMPARTMENT
Freezing fresh food
1. It is advisable to set the temperature colder or turn on the Fast Freeze/
Fast Cool* at least four hours before removing the food from the
freezer compartment, to prolong the preservation of the food during
the defrosting phase.
2. To defrost, unplug the appliance and remove the drawers. Leave
the door open to allow the frost to melt. To prevent the water from
escaping during the defrost, it is advised that you place an absorbent
cloth on the bottom of the freezer compartment and wring it out
regularly.
3. Clean the inside of the freezer compartment and dry it carefully.
Legend
FREEZER DRAWERS
FREEZING ZONE DRAWER
(Max cool zone)
Suggested to freeze fresh/cooked food
4. Turn the appliance back on and put the food back inside. To remove
the frost on the STOP FROST* accessory, follow the CLEANING.
Ice cubes*
Fill 2/3 of the ice tray with water and put it back in the freezer
compartment. Do not, under any circumstances, use sharp or pointed
objects to remove the ice.
The quantity of fresh food that can be frozen in a specic time period is
indicated on the rating plate.
Load limits are determined by baskets, aps, drawers, shelves etc. Make
sure that these components can still close easily after loading.
Light system (depending on model)
This product contains a light source of energy
eciency class G
This product contains a light source of energy
eciency class G
GENERAL INFORMATION
The drawers, baskets and shelves should be kept in their current position
unless otherwise specied in this quick guide. The light system inside the
refrigerator compartment uses LED lights, allowing for better lighting than
with traditional light bulbs, as well as for very low energy consumption.
This product contains 4 lateral light sources of
energy eciency class A
This product contains 4 lateral light sources of
energy eciency class A and a top light source
of energy class G
This product contains a top light source of
energy eciency class G
Doors and lids of the refrigeration appliance should be removed before
disposal in the landll, to avoid children or animals getting trapped inside.
* Available only on certain models
TROUBLESHOOTING
What to do if... Possible reasons Solutions
The control panel is
switched o, the appliance
does not work.
The inside light does not
work.
The temperature inside the
compartment is not cold
enough.
The front edge of the
appliance, at the door striker
seal, is hot.
The red
and a sound signal is
activated.
The red
a sound signal is activated
and the
activated.
icon is ashing
icon is ashing,
icon is
The appliance may be in On / Stand-by
mode.
There may be an appliance power
supply problem.
The light may need to be replace. Models with LED lights: contact the authorised Technical Assistance
The appliance may be in On / Stand-by
mode.
There could be various causes (see
“Solutions”).
This is not a defect. It prevents
condensation from forming.
Door open alarm
It is activated when the refrigerator and/
or freezer compartments door remains
open for a prolonged period of time.
Blackout alarm
This activates when there is a prolonged
interruption to the power supply which
has caused an increase in temperature
in the freezer compartment.
Note: until the blackout alarm is
deactivated, you cannot set a dierent
temperature for the product.
Turn the appliance on pressing the On/Stand-by button. Check that:
• there is not a power outage;
• the plug is properly inserted in the power socket and the mains
double-pole switch (if present) is in the correct position (i.e. allows
the appliance to be powered);
• the household electrical system protection devices are ecient;
• the power cable is not damaged.
Service.
Turn the appliance on pressing the On/Stand-by button.
Check that:
• the doors close properly;
• the appliance is not installed near a heat source;
• the set temperature is adequate;
• the circulation of air through the ventilation of the appliance is
ensured.
No solution is necessary.
To turn the sound signal o, close the open door of the product.
Before turning o the sound signal, it is recommended that you pay
attention to the temperature shown on the temperature display,
corresponding to the highest temperature reached in the freezer
compartment during the power cut. To turn the sound signal o,
briey press the “Turn o sound alarm” button.
After pressing the button, the temperature display will again show
the temperature set. If the freezer compartment has not yet reached
the optimal temperature for the preservation of the food, the
freezer compartment temperature alarm may activate (see freezer
compartment temperature alarm). Check the condition of the food
before consuming it.
The red
(without ashing), a sound
signal is activated and the
freezer temperature display
is ashing.
The red
light up, a sound signal is
activated and the letter “F”
is ashing on the display.
* Available only on certain models
icon is lit up
icon will
Policies, standard documentation and additional product information can be found by:
• Visiting our website docs . indesit . eu
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product's identication plate.
The model information can be retrieved using the QR-Code indicated on the energy label. The label also includes
the model identier that can be used to consult the https://eprel.ec.europa.eu database portal.
Freezer compartment temperature
alarm
The freezer compartment temperature
alarm indicates that the compartment
is not at the optimum temperature. This
may occur: when using for the rst time,
after defrosting and/ or cleaning, when
freezing large quantities of food or
when the door to the freezer does not
close completely.
Malfunction alarm
The alarm indicates the malfunction of a
technical component.
To turn o the sound signal, briey press the “Turn o sound alarm”
button (the temperature display will stop ashing). When the
optimum temperature conditions have been reached, the red icon will
automatically turn o. If the freezer compartment temperature alarm
continues, contact the Authorised Technical Assistance Service.
Call the authorized Technical Assistance Service. To turn the sound
signal o, briey press the “Turn o sound alarm” button.
400011502187
Loading...