Indesit 8211 User Manual

DISPLAY OPERATION

G I ON P

A

B

C

ON/OFF

FRIDGE

RESET

ALARM

ECOECO

D

We recommend in an y case that you
read the instruction booklet carefully

E

and that you follow the instructions
that appear on the display (in the

F

form of scrolling text P).

J K L MH

How to turn the fridge and freezer on and off

To turn the appliance on and off, keep the on/off button (A) pressed for more than two seconds. The fridge
compartment can be tur ned off by keeping the on/off fridge button (B) pressed for more than two seconds.
Repeat this to turn it back on.

How to adjust the temperature

To set the temperature required, press the mode button (D) repeatedly until the temperature of the fridge
compartment (G) or of the freezer compartment (H) begins to flash. No w you can set the new v alue by pressing
adjust-select (buttons E and F to increase or lower the temperature respectively). To confirm your selection,
press the mode button (D) within ten seconds.

How to select and set individual functions: eco (I), super cool (J), super freeze (K),
holiday (L) and ice-party (M)

T o select the desired function, press the mode b utton (D) button repeatedly until the symbol is bordered with red.
Now press adjust-select + (E) to set this function, which is highlighted in blue. To confirm your selection, press
the mode button (D) within ten seconds.

How to deselect a function previously set

To deselect the function previously set, press the mode button (D) repeatedly until the symbol is bordered with
red. No w press adjust-select - (F) to deselect this function. To confirm your selection, press the mode button (D)
within ten seconds.

How to turn alarm buzzers and visual warnings off

Press the reset alarm (C) button to silence the alarm buzzer. Press it again to eliminate the scrolling text from the
display.
If the alarm sounding is the one warning you that the door is open, just shut the latter to turn it off.

How to set the time and date on the display

Press the mode button (D) until the clock digits start flashing and then use the adjust-select button (E and F) to
set the correct time. It is subsequently necessary to confirm the setting by pressing the mode button (D). T o set
the date, press mode (D) again and repeat this procedure.

How to select the language (Italian, French, English, Spanish or Portuguese)

To select the desired language, press the mode button (D) until the text for the language setting appears. Use
adjust-select (E and F) to select the language you wish. Confirm this subsequently by pressing the mode button
(D).
The first time the appliance is switched on, the display will automatically request that you set the language
desired. T o set the latter , just follow the above-mentioned procedure.

Warning! Should the displa y indicate the words “DEMO MODE”, the appliance is on demo mode (the appliance

does not produce cold air despite the fact that the display and indoor light are on). To exit this mode, keep the
mode button (D), adjust-select + (E) and adjust-select - (F) buttons pressed at the same time f or more than three
seconds. The refrigerator can thus oper ate normally.