Inateck WP1002 Instruction Manual

www.inateck.com

Instruction Manual

WP1002
Wireless Presenter

WP1002 Wireless Presenter

Instruction Manual (EN)

I. Packing list

● WP1002*1

● USB Receiver*1

● Users manual*1

II. WP1002 Diagram

III. Specs

IV. Function

Note: 1. In Mac system Keynote software, only support page up,

page down, play/esc and blank screen functions.

2. Non-support hyperlink function for WPS office.

V. Operating Hints

1. Pull the Mini USB receiver out of presenter, and plug into
computer available interface, and then it works.

Press to emit laser; release the button, the laser disappears.

①Working Indicator
②Low Battery Indicator: Press any key, if Indicator blinks quickly,

please replace the battery.

Single press to “Page Up”
Long press to “Play/Esc” (For PowerPoint only)

Single press to “Page Down”
Long press to “Blank Screen” ( For PowerPoint full slideshow only)

Single click to “Select Hyperlink” ( For PowerPoint full slideshow only)
Long press to “Switch Windows”

Single click to “Open Hyperlink” ( For PowerPoint full slideshow only)
Long press to “Close Window”

Push upwards to Power On； Push downwards to Power Off.

LED

Tab

Enter

Power
Switch

Product Name
Product Model
RF Frequency
Control distance
Laser distance
Battery
Working voltage
Sleep current
Dimension

Wireless Presenter
Inateck WP1002

2.4GRF
100m
Up to 200m
<1mW or <5mW
AAA X1
＜30uA
135*22.2*13.8mm

2. Upon the first installation on Mac, Keyboard Set Assistant may
appear and prompt that the keyboard cannot be identified. Just
click “Continue” to finish the installation, and then the presenter
will work accordingly.

3. The receiving distance of Mini USB receiver will be decreased by
disturb of electronic devices around.

4. If no operation for the presenter, it will enter into the sleep mode
automatically, press any key to awaken.

VI. Battery Installation

Note

● Ensure battery polarity (+) (-) is correct.

● Do not leave bad or exhausted battery in the device.

● Please remove battery if device is not used for a long period.

● If the device does not function correctly or if the operating range

becomes reduced, try to replace the battery with new one.

VII. Safety Measures

1. To avoid possible eye damage, never point the device at people
especially their faces, or look directly into the device’s laser beam.

2. Avoid pointing the device’s laser beam at a mirror or other highly
reflective surface.

3. Keep the device away from children.

4. Never view the device’s laser beam using telescopic devices,
such as a microscope or binoculars.

5. Any attempt to disassemble, adjust or repair the device may result
in exposure to laser light or other safety hazards.

Website: Hp://www.inateck.com

Email: [e-mail]

(Service me: Mon - Fri 9:00AM - 5:00PM CET)

Tel: [phone]