Page 1
w w w . i n a t e c k . com
FE2004
Page 2
- 2 -
FE2004 Portable Enclosure
Instruction Manual
Screw less and tool free design, precise and high quality crafting, unique ergonomic
appearance and structure, light and convenient to carry
Supports all standard 2.5“ SATA hard drives with a height of up to 9.5 mm
High-quality plastic and galvanized steel material, exquisite design
LED for fast and informative information about operation status, supports Plug & Play,
no computer restart necessary
Compatible operating system environments: Windows XP/Vista/7/8, MacOS 9.0 and
higher
Packing list:
FE2004 Enclosure x1
USB3.0 data cable x1
Instruction manual x1
I. FE2004 Introduction
Featuring advantages like small weight, slim form and high portability, 2.5” drives always
were received in a positive way by computer enthusiasts. Portable drive enclosures in this
way became the most important choice for users regarding solutions for storage mediums.
The stability of a storage medium directly influences the safety and life span of data
and
drives.
To accommodate these factors, Inateck developed and introduced a new
enclosure
named FE2004, supporting 2.5” HDD/SSD with a height of up to 9.5 mm in a USB3.0
environment. The casing is casted using highly robust and stable ABS plastics, featuring a
precise and high class workmanship. It is the ideal solution when quick and convenient
swapping of 2.5” drives without the utilisation of tools i
s wanted. The installation and
swapping of many drives was never any easier, the expansion of data storage capacity
never any more convenient.
High speed interface and high compatibility
Page 3
- 3 -
Scheme image of the enclosure:
LED indicator for power
and transfer status
USB3.0 interface
Front Side
II. Technical data
Product name Portable 2.5” HDD/SSD Enclosure
Product type Inateck FE2004
Weight 75g
Colour Black
Supported drives 2.5” SATA I/II/III HDD/ SSD
Interface USB3.0
Maximum height of drives Height of up to 9.5mm supported
Hot Plug, Plug & Play Supported
Licences CE, FCC
Measurements 130mm length x 83mm width x 13mm height
Operation environment Storage: -40 to 70 °C; Operation: 5 to 55 °C
Supported operating systems Windows2000/XP/Vista/7/8; Mac 9.0 or above
Page 4
- 4 -
III. Hard drive installation steps
a. Push it according to the arrow direction, take off the cover
b. According to the direction of the arrow as shown below, carefully put into
2.5inch HDD enclosure to make it connect the connector.
c. Push the cover according to the arrow direction, finish installation.
1
2
Page 5
- 5 -
d. Insert the one port of USB data cable to connect HDD enclosure, the other
port connect to the computer. After find the devices, lower right corner of
computer will have a mobile hardware prompt, disk management will also
have one.
IV. Instruction for the removal of drives
Please note: Before the removal of the data storage device, please stop all data access
and transfer to the device, so that the storage can be normally removed. Forced removal
may lead to damage or loss of crucial data. To prevent any data loss, please strictly follow
the steps for removal below!
a. Removal from Windows systems: Right
click on the hardware or USB device
removal symbol in the status bar, click on the periphery to be removed. When
the system notification reading “the device can now be safely removed.”
shows up, you can remove the data storage.
Page 6
- 6 -
Another way to remove the data storage is through the device manager
(“Computer” -> “Device Manager” -> “Drives” -> Click on “Remove” for the drive
to be removed, so that the drive can be detached safely.
b. Removal from Macintosh systems: Please choose the symbol for “Portable
drives / devices”, choose the menu function “Remove” from the drop down menu
by right clicking onto the symbol. You may also drag the “Portabl
e device” to the
rubbish bin. Now, the device can be s
afely removed.
Page 7
- 7 -
Page 8
Loading...