Inateck BTSP-10 plus Instruction Manual

www.inateck.com

Instruction Manual

BTSP-10 plus
Bluetooth Speaker

BTSP-10 plus Bluetooth Speaker

Instruction Manual (EN)

I. Packing list

● BTSP-10 plus*1

● USB Charging Cable*1

● 3.5mm Audio Cable*1

● Manual*1

● Carrying Bag*1

II. BTSP-10 plus Diagram

① ② ③

④
⑤
⑥
⑦

① Bluetooth button：

- Used to connect this speaker to another device’s Bluetooth signal

- Play and Pause audio

- Answers and ends calls

② Volume down
③ Volume up
④ 5V Micro USB Power Port

- Used to recharge the speaker’s battery

⑤ Power Switch

- Turns the speaker on and off

⑥ 3.5mm audio input

- Connect a 3.5mm audio cable from this port to another device to play audio
from that device

⑦ Indicator Light

III. Specs

IV. Powering on/off

There is a power switch located on the side of the speaker (#5 on
the diagram). Push the switch to turn it on & off.

V. Connecting the speaker

Wireless/Bluetooth

This speaker can connect wirelessly to devices that have Bluetooth.
Use the following steps:

1. Press the Bluetooth button for 6 seconds

2. The light on the front will be flashing red and blue light
alternately, indicating that the speaker is in pairing mode

3. Go to your device’s Bluetooth connection screen and choose
“Inateck BTSP”

4. If you are asked for a password,type 0000

5. The blue light will stop flashing and your speaker will be
connected

*The method of connecting Bluetooth may vary with your device.
Please refer to your device’s manual or manufacturer if the above
steps do not work.

Wired

There is a 3.5mm port on the side (#6 on the diagram) of the
speaker which can be used to connect to another device by using
the included 3.5mm cable. If your device uses a port other than

3.5mm, then you will need an adaper cable.

Product Name
Product Model
Product Size
Charging Interface
Charging Current
AUX 3.5mm line input impedance
Input Sensitivity
Output Power
Time needed to fully charge Battery
Battery life while playing music
System Support

Bluetooth Speaker
Inateck BTSP-10 plus
165mm*60mm*45mm
USB
500mA

47kΩ

560MV
6W（3W*2）

3.5 hours
5-8 hours
WindowsXP/Vista/7/8; Mac; ios; Android

VI. Features

Multlmedia Controls

The buttons on this speaker can control the volume and perform
play/pause functions (Only while connected in Bluetooth mode).
+: Volume up

-: Volume down
Bluetooth Button: Play Pause

VII. Battery

Charging

Connect the 5V micro USB power port on the speaker to the USB
port of a power source such as a laptop or a USB wall adapter. A
micro USB cable is included for this use.

There is a light on top of the power switch that will indicate the
following charging statuses:

- Red: Charging

- Green: Fully charged

USB Cable

USB port on a
PC/ laptop

USB wall adapter

VIII. Warning/Caution

Speaker should be charged with phone USB chargers and computer
USB port only! Chargers for other devices such as tablets should not
be used. USB chargers that provide more than 1A while chargers
(ipad charger etc.) could severely damage speaker’s battery and
potentially cause malfunctions.

Website: Hp://www.inateck.com

Email: [e-mail]

(Service me: Mon - Fri 9:00AM - 5:00PM CET)

Tel: [phone]