Inalto ITLW55W, ITLW70W User Manual

Download

Page 1

MODELS

TOP LOADER

— ITLW55W ITLW70W ITLW80W ITLW100W

WASHING MACHINE

5.5KG 7KG 8KG 10KG

V 4.3

USER MANUAL

Page 2

User Manual

Welcome

Residentia Group Pty Ltd

ACN. 600 546 656 165 Barkly Avenue Burnley, Victoria Australia 3121

— Applico Ltd

635 Great South Road Penrose, Auckland 1061 New Zealand

—

InAlto

www.inalto.house

/ inalto.house / inalto.house

Congratulations on purchasing your new appliance!

The InAlto brand is proudly distributed within Australia by esidentia Group Pty Ltd and within New Zealand by Applico Ltd.

Please refer to the warranty card at the rear of this manual for information regarding your product’s parts and labour warranty, or visit online at:

– www.residentia.group – www.applico.co.nz – www.inalto.house

Both esidentia Group & Applico are customer obsessed and our Support Teams are there to ensure you get the most out of your appliance. Should you want to learn more about recommended usage, the various features of your appliance, and importantly taking care of the unit when cleaning, our Support Teams are here to help.

Telephone Contacts: – AU: 1300 11 4357 – NZ: 0800 763 448

It is important that you read through the following use and care manual thoroughly to familiarise yourself with the installation and operation requirements of your appliance to ensure optimum performance.

Again, thank you for choosing an InAlto appliance and we look forward to being of service to you.

Page 3

inalto.house

Contents

Welcome

Your Washing Machine

Operating Instructions

Safety Instructions

Installation

Cleaning & Maintenance

Troubleshooting

Your Receipt

Warranty Information

Technical Specications

Purchase Details

Page 4

User Manual

Safety Instructions

For your safety, the information in this manual must be followed to minimize the risk of re or explosion, electric shock, or to prevent property damage, personal injury or loss of life.

• This appliance is not intended for use by persons(including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied persons in order to avoid a hazard.

• The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.

• The openings must not be obstructed by a carpet.

Model

Washing

Capacity

Standard Water

Pressure

Explanation of the following signal words:

WARNING!

This signal word indicates a potentially dangerous situation which may result in death or serious injuries unless it’s avoided.

CAUTION!

This signal word indicates a potentially dangerous situation which may result in slight or minor injuries or damage to property and the environment.

NOTE!

This signal word indicates a potentially dangerous situation which may result in slight or minor injuries.

ITLW55W 5.5kg 0.03MPa~0.8MPa

ITLW70W 7.0kg 0.03MPa~0.8MPa

ITLW80W 8.0kg 0.03MPa~0.8MPa

ITLW100W 10.0kg 0.03MPa~0.8MPa

Page 5

inalto.house

WARNING!

POTENTIAL ELECTRIC SHOCK

• This appliance is for indoor use only.

• Do not position washing machine in a humid place.

• Do not insert your hands into running spin-dry tub.

• If the spin-dry tub does not stop within 15 seconds after opening the cover, please stop using the machine and have it repaired.

• Before performing any maintenance on the device, unplug the appliance from the mains.

• Always unplug the machine and turn o the water supply after use. The max. inlet water pressure, in pascals. The min. inlet water pressure, in pascals.

• To ensure your safety, power plug must be inserted into an earthed three-pole socket. Check carefully and make sure that your socket is properly and reliably earthed.

• Make sure that the water and electrical devices must be connected by a qualied technician in accordance with the manufacturer's instructions and local safety regulations.

RISK TO CHILDREN

• The appliance can be used by children aged from 8 years an d above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• Animals and children may climb into the machine. Check the machine before every operation.

• Young children should be supervised that they do not play with the appliance.

• Machine may be very hot during the operation. Keep kids and pets far away from the machine during the operation very wet rooms as well as in the rooms with explosive or caustic gas.

• Remove all packaging before using the appliance.

Otherwise, serious damage may result.

• The washing machine with single inlet valve only can be connected to the cold water supply. The product with double inlet valves should be correctly connected to the hot water and cold water supply.

• Plug must be accessible after installation.

RISK OF EXPLOSION

• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible or explosive substances( such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.) This may result in re or explosion.

• Before hand thoroughly rinse items of washing by hand.

CAUTION!

INSTALLING THE PRODUCT

• This washing machine is for indoor use only.

• It isn't intended to be built-in using.

• The openings must not be obstructed by a carpet.

• Washing machine shall not be installed in bath room or very wet rooms as well as in the rooms with explosive or caustic gases.

• Remove all packaging before using the appliance. Otherwise, serious damage may result.

• Plug must be accessible after installation.

RISK OF DAMAGING THE APPLIANCE

• Your product is only for home use and is only designed for the textiles suitable for machine washing.

• Do not climb up and sit on top cover of the machine.

• Do not lean against machine door.

• Cautions during Handling Machine:

1. The accumulated water shall be drained out of

the machine.

2. Handle the machine carefully. Never hold each protruded part on the machine while lifting. Machine door can not be used as the handle during the conveyance.

3. This appliance is heavy. Transport with care.

• Please do not close the door with excessive force.

• Do not wash carpets.

OPERATING THE APPLIANCE

• Before washing the clothes at rst time, the product should be operated in one round of the whole procedures without the clothes inside.

• Do not wash ammable and explosive or toxic solvents.

• Do not use gasoline and alcohol etc. as detergents.

• Please only select the detergents suitable for machine washing, especially for drum.

• Make sure that all pockets are emptied. Sharp and rigid items such as coin, brooch, nail, screw or stone etc. may cause serious damages to this machine.

• Please check whether the water inside the drum has been drained before opening its door. Please do not open the door if there is any water visible.

• Be careful of burning when the product drains hot washing water.

• Never rell the water by hand during washing.

• After the program is completed, Please wait for two minutes to open the door.

Page 6

User Manual

Your Washing Machine

PRODUCT DESCRIPTION

Top lid Water inlet valve

Frame

Power cord and plug

Control panel

Cabinet

Drain hoseAdjustable feet

NOTE!

The product line chart is for reference only, please refer to real product as standard.

Handle

ACCESSORIES

Inlet hose

assembly

NOTE!

If the drain hose is already installed on the machine, then there is no spring clamper and drain hose in the accessories.

Cabinet

baseboard

User

manual

Screw Spring

clamper

Drain hose

Page 7

inalto.house

Installation

INSTALLATION INSTRUCTIONS It’s recommended to use the washing machine on its own dedicated power outlet for both convenience and safety. The power outlet must be grounded.

IMPORTANT!

If the power cord is damaged, it must be replaced by Residentia Group or one of it’s authorised service representatives. Please contact 1300 11 HELP (4357) and ensure the appliance is completely disconnected from the power supply.

WARNING!

• Stability is important to prevent the product from moving!

• Make sure that the product should not stand on the power cord.

Before installing the machine, the location must be:

1. Rigid, dry, and a level surface

2. Avoiding direct sunlight

3. Sucient ventilation

4. Room temperature is above 0 °C

5. Kept far away from the heat resources such as coal or gas.

UNPACKING THE WASHING MACHINE

WARNING!

• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.

• There is a risk of suocation! Keep all packaging well away from children.

1. Remove the cardboard box and styrofoam packing.

2. Lift the washing machine and remove the base packing.

3. Remove the tape securing the power supply cord and drain hose.

4. Remove the inlet hose from the drum.

INSTALLATION OF THE DRAIN HOSE

Drain hose inserted

into the drain

Clamping spring

Page 8

User Manual

Operating Instructions

WARNING!

To prevent leakage or water damage, follow the instructions in this chapter carefully:

• Do not kink, crush, modify, sever or protract the inlet hose or drain hose.

• Position drain hose properly ,otherwise damage might result of water leakage.

• If drain hose is too long, do not force it into washing machine as it will cause abnormal noises.

Use an upper drain system to place the end of drain hose:

LEVELLING THE WASHING MACHINE

WARNING!

The lock nuts on all four feet must be screwed tightly against the housing.

1. Check if the legs are closely attached to the cabinet. If not, please turn them to their original positions tighten the nuts.

2. Check alignment of the product with a spirit level and if required, correct.

3. Loosen the lock nut and turn the feet until it closely contacts with to the oor.

4. After being locked properly, press four corners again to make sure that they has been adjusted properly.

Page 9

inalto.house

SELECTION OF TAP Please select appropriate tap.

Ordinary faucet

CONNECTION OF INLET HOSE, TAP AND WASHING MACHINE

Screw tap Special washing

machine tap

1. Connection between ordinary tap and inlet hose.

a) Loosen clamp nut to show 5mm thread

b) Loosen four bolts

c) Set connecting base on tap and tighten bolts evenly

d) Tighten clamp nut

e) Press slide bushing, insert inlet hose into connecting base

2. Connection between screw tap and inlet hose.

tap with threads and inlet hose

f) Connection nished

special tap for washing machine

g) After connection and installation, check if there is water leakage

Page 10

User Manual

Operating Instructions (Continued)

PREPARATION BEFORE WASHING

CAUTION!

• Before washing, please make sure it’s installed properly.

• Before washing it at rst time, the washing machine shall be operated in one round of the whole procedures without clothes in as follows.

Plug in

WASHING

Power On

NOTE!

• If default is selected, step 2, 3 can be skipped.

Open tap

Select Program

Load and Close door

Select Water Level

Add detergent

Start up

AFTER WASHING

Buzzer will beep after washing nished and the power supply will be cut o automatically. Then unload the laundry.

Page 11

inalto.house

WASHING MATTERS NEEDING ATTENTION

• The working condition of the washer should be(0-40)°C. If used under 0°C, the inlet valve and draining system may be damaged. If the machine is placed under condition of 0°C or less, then it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose are not frozen before use.

• Please check the labels and the explanation of using detergent before wash. Use non-foaming or less-foaming detergent suitable for machine washing properly.

Check the label

Put small clothes into the

pillow slip

WARNING!

• When washing a single clothes, it may easily cause great eccentricity and give alarm due to great unbalance. Therefore it is suggested to add one or two more clothes to be washed together so that draining can be done smoothly.

• Don’t washing the clothes touching with kerosene, gasoline, alcohol and other ammable materials.

Take out the items out of

the pockets

Turn easy-pilling and

long-pile fabric inside out

Knot the long strips,zip or

button

Separate clothes with

dierent textures

THE USAGE OF DETERGENT AND WASHING POWDER

• Add liquid detergent to the left compartment of the detergent drawer.

• Add power detergent to the right side compartment of the detergent drawer.

• As for the agglomerated or ropy detergent or additive, before they are poured into the detergent box, it is suggested to use some water for dilution to prevent the inlet of detergent box from being blocked and overowing while lling water.

• Please choose suitable type of detergent for the various washing temperature to get the best washing performance with less water and energy consumption.

Page 12

User Manual

Operating Instructions (Continued)

WATER LEVEL:

Select water level according to clothing categories, degree of soiling and washing habits of customers.

Press this button to set your Water Level, where 1 is low and 8 is high.

A solid indicator light indicates the water levels to the left (1, 3, 5, 7) and a ashing indicator light indicates the water levels to the right (2, 4, 6, 8).

DISPLAY:

The display shows the settings, estimated time remaining, options, and status messages for your washer. The display will remain on through the cycle.

When LED ashing, it means the time that delay to start the machine. When LED lighting, it means the program time that remaining.

CAUTION!

• If there is any break in the power supply while the machine is operating, a special memory stores the selected program and when the power is restarted.

DELAY:

After selecting a Program, press the Delay button to choose a delayed start time. Press Start/Pause to commence the delay operation.

To switch the delayed start o, simply press the button until the delay light is o. If the program has already started, press the Power button to reset the program.

WASH FUNCTION:

Press this button to select your wash function. I.e. Soak, Wash, Rinse or Spin, or a combination of these.

Page 13

inalto.house

WATER TEMPERATURE:

Press this button to select your water temperature. When both the Hot and Cold indicators are lit, your washing machine will be set to use Warm water.

RINSE:

START/PAUSE:

After selecting your desired wash settings, press this button to start your wash cycle.

You can also use this button to pause the washing machine during operation.

POWER:

Press this button to turn your washing machine On or O.

Press this button to select your desired amount of times to rinse.

FAST MODE:

CHILD LOCK:

Simultaneously press the Rinse and Program buttons to activate the child lock. Repeat this process to deactivate the child lock.

NOTE!

• The Child Lock function will

lock all buttons except Power.

PROGRAM:

Press this button to select your wash program type. A solid indicator indicates the programs to the left, whereas a ashing indicator indicates the programs to the right.

Fast Mode can save between 20-40% of your cycle time by strengthening the washing beats.

Simultaneously press the Program and Temperature buttons to activate Fast Mode. Repeat this process to deactivate Fast Mode.

Page 14

User Manual

Operating Instructions (Continued)

PERSONALISED WASH PROGRAM SETTING

Users can select washing program according to actual demand, set rinsing times, water volume and delay amount.

→

Power On

OPERATIONS OF WASHING PROCESS

Users can set single process or combinations of washing, rinsing and spinning freely according to demand. Detailed operations as follows for dierent models:

ONE TOUCH SMART WASH

Power On

SPIN

Program Water Level Function

→

→ →→

Rinse

Start

→→ →

Temperature Delay Start

→

Power On

WASH + RINSE + SPIN

Power On

NOTE!

• There are other process combinations just like the above.

Keep pressing the Function button

until the Spin light is the only one on

→

Keep pressing the Function

button until the Wash, Rinse

and Spin lights are all on

→

Start

Press Rinse seperately,

set desired setting

→

Start

Page 15

inalto.house

WASHING PROGRAMS

• MIX

Suitable to wash cotton, linen, ax. jute clothes

• NORMAL (STANDARD)

Standard fabric washing program, suitable to wash ramie cotton fabric. Wash for once, rinsing for twice, the spin time is a little long.

• JEANS

Suitable to wash heavy stained/wearable clothes.

• SOFT

The tempo is soft, slow washing and spinning speed, to make the lightest wear and deformation.

• STRONG

The wash time is longer, the stream is stronger, so the washing eect is better.

• HEAVY

Suitable to wash heavy stained/wearable clothes.

• QUICK 15'

Suitable to wash light stained clothes and summer clothes.

• FAST MODE

Fast Mode can save between 20-40% of your cycle time by strengthening the washing beats.

Start up Fast Mode: Power on, select "Normal", "Soft", "Mix", "Strong" or "Jeans" program, then press FAST MODE button combinations.

Cancellation of Fast Mode function: The function can be cancelled by pressing Fast Mode combination buttons (Program and Temperature) or Power o.

• FUZZY WEIGHTING

The washing machine will select the water level automatically according to the load weight.

1. When there's water in the tub, this function is not available;

2. Before press [Start/Pause] button, if consumer selected the water level, there will be no fuzzy weighting function;

3. After press [Start/Pause] button, the washing machine will run the fuzzy weighting function. Consumer can also select the water level to set the water level as needed.

Page 16

User Manual

Cleaning & Maintenance

CLEANING AND CARE

WARNING!

• Before you begin maintenance, please unplug the machine and close the tap.

CLEANING THE CABINET Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overow, use the wet cloth to wipe it o immediately. No sharp items are allowed.

NOTE!

• Formic acid and its diluted solvents or equivalent are forbidden, such as alcohol, solvents or chemical products, etc.

CLEANING THE INLET FILTER

NOTE!

• Inlet lter must be cleaned if there is less water.

Washing the lter in washing machine:

1. Screw o the inlet pipe from the rear of the machine.

2. Pull out the lter with long pliers and reinstall it back after being washed.

3. Use a brush to clean the lter.

4. Reconnect the inlet pipe.

Lint lter clean:

1. There is a built-in lint lter in your washer. It can help to collect lint during washing cycle.

2. It is suggested to clean the lint lter every 10 cycles.

3. Take it out and clean the lter with water. Then place it back into the washer.

Magic lter

Normal lter

Page 17

inalto.house

CLEANING THE DRAIN PUMP FILTER (NOT APPLICABLE FOR MODEL ITLW55W)

WARNING!

• Be careful of the hot water!

• Allow detergent solution to cool down.

• Unplug the machine to avoid electrical shock before washing.

• Drain pump lter can lter the yarns and small foreign matters from the washing.

• Clean the lter periodically to ensure the normal operation of washing machine.

Drain the water out

of the pump, using a

container to collect

Clean the lter

Open the lter by turning

to the counter clockwise

Restore it and adjust the

convex place to align at the

pump hole

Remove foreign objects

Tighten the pump

cover clockwise

CAUTION!

• Make sure that valve cap and emergency drain hose are reinstalled properly, cap plates should be inserted aligning to hole plates otherwise water may leak;

• Some machines don’t have emergency drain hose, so step 2 and step 3 can be skipped. Rotate lower cover cap directly to make water run into basin.

• When the appliance is in use and depending on the program selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has nished the cycle, and is empty. When replacing the cover, ensure it is securely re-tightened.

Page 18

User Manual

Troubleshooting

OPERATION IN CASE OF EMERGENCY

In the event of an emergency you should:

• Switch o all controls.

• Switch the washing machine o at the power point or at the fuse box.

• Call the Residentia Support Team on 1300 11 HELP (4357).

Some minor faults can be xed by referring to the instructions given in the Troubleshooting section below. There is also a self-help section online at https://support.residentiagroup.com.au/

DESCRIPTION INSPECTION ITEMS

• If the power is o or the fuse is burned out.

• If the power supply voltage is too low.

• If the water amount reaches to the required water level.

No washing

(The washer will not work if the water amount does not reach the required water level)

• If it is set to "Delay" washing mode. (It will only start to work until the reservation time reached)

No water ﬂows in

Abnormal draining

Abnormal spin

• If the power is o or the fuse is burned out.

• If the water supply is cut o or the water pressure too low.

• If the inlet hose is properly connected and the water tap is opened.

• If the ﬁltering screen of inlet valve is blocked by dirt.

• If the coil of inlet valve is damaged. (The slight electromagnetic sound is normal phenomenon when the inlet valve is switched on)

• If the "Start / Pause" button is pressed after the power switch is pressed.

• If the water drain hose is placed very high.

• If the end of water drain hose is sealed in pond.

• If the internal rubber ring of drain valve is blocked by dirt.

• If the door lid is closed.

• If all clothing piled largely at one side of barrel or the clothing is excessively placed.

• If the washer is not placed in stable condition or it is placed in inclination state. (The ground is not ﬂat).

• If the motor belt is loosened.

Page 19

inalto.house

When the washing machine experiences a fault, please contact the Residentia Group support team on:

Telephone: 1300 11 HELP (4357).

WARNING! Never dismantle the washing machine.

ERROR MESSAGES AND SOLUTIONS

INDICATION REASON SOLUTION

"E1" displays Alarm for

abnormal water intake.

"E2" displays Alarm for water drain

has not ﬁnished.

"E3" displays Alarm for lid not closed

before wash and spin.

"E4" displays

Alarm for washing stay

at one side.

Other If problems still occur, please contact

Check the water tap is opened

or not

Check the water level

sensor and drain pump

Close the lid, Press "Start" button

Manually balance clothes

in the barrel by hand.

the support team with the number at

the top of this page.

Page 20

User Manual

This page is intentionally left blank

Page 21

inalto.house

Technical Specications

Below outlines the technical specications for your InAlto Washing Machine.

ITLW55W ITLW70W ITLW80W ITLW100W

Size

Net Weight

Rated Input Power

Rated Capacity of

Wash and Spin

Rated Voltage

Rated Frequency

Maximum water

pressure permitted in

the water inlet

Minimum water

pressure permitted in

the water inlet

515w � 525d � 910h

(mm)

31kg 38kg 39kg 45kg

400W 450W 480W 600W

5.5kg

(dry clothes)

230-240V~ 230-240V~ 230-240V~ 240V~

50Hz 50Hz 50Hz 50Hz

0.03MPa 0.03MPa 0.03MPa 0.03MPa

0.8MPa 0.8MPa 0.8MPa 0.8MPa

550w � 565d � 935h

(mm)

7.0kg

(dry clothes)

580w � 596d � 968h

(mm)

8.0kg

(dry clothes)

601w � 630d � 1000h

(mm)

10.0kg

(dry clothes)

NOTE:

This product is subject to continuous improvement, specication are subject to change without prior notice. This product was tested in accordance with AS/NZS 2040.2 and AS/NZS6400 using program: Standard, which is the program recommended for a normally soiled cotton load at rated capacity.

Page 22

User Manual

Attach your receipt to this page

Page 23

inalto.house

Purchase Details

For future reference, please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice.

STORE DETAILS

STORE NAME

ADDRESS

TELEPHONE

PURCHASE DATE

PRODUCT DETAILS

MODEL NO.

SERIAL NO.*

Page 24

User Manual

Warranty Information

AUSTRALIA WARRANTY TERMS & CONDITIONS LAUNDRY APPLIANCES

This document sets out the terms and conditions of the product warranties for Residentia Group Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appliance.

1. IN THIS WARRANTY (a) ‘acceptable quality’ as referred to in clause 10 of this

warranty has the same meaning referred to in the ACL;

(b) ‘ACL’ means Trade Practices Amendment (Australian

Consumer Law) Act (No.2) 2010;

purchased by you accompanied by this document;

(d) ‘ASR’ means Residentia Group authorised service

representative;

(e) ‘Residentia Group’ means Residentia Group Pty Ltd

of 165 Barkly Ave, Burnley VIC 3121, ACN 600 546 656 in respect of Appliances purchased in Australia;

(f ) ‘major failure’ as referred to in clause 10 of this

warranty has the same meaning referred to in the ACL and includes a situation when an Appliance cannot be repaired or it is uneconomic for Residentia Group, at its discretion, to repair an Appliance during the

Warranty Period; (g) ‘Warranty Period’ means: (i) where the Appliance is used for personal,

domestic or household use (i.e. normal single family use) as set out in the instruction manual, the Appliance is warranted against manufacturing defects for 24 months, following the date of original purchase of the Appliance;

(h) ‘you’ means the purchaser of the Appliance not having

purchased the Appliance for re-sale, and ‘your’ has a

corresponding meaning.

2. This warranty only applies to Appliances purchased

and used in Australia and is in addition to (and does

not exclude, restrict, or modify in any way) any

non-excludable statutory warranties in Australia.

3. During the Warranty Period Residentia Group or its

ASR will, at no extra charge if your Appliance is readily

accessible for service, without special equipment and

subject to these terms and conditions, repair or replace

any parts which it considers to be defective. Residentia

Group or its ASR may use remanufactured parts to

repair your Appliance. You agree that any replaced

Appliances or parts become the property of Residentia

Group. This warranty does not apply to light globes,

batteries, lters or similar perishable parts.

4. Parts and Appliances not supplied by Residentia Group

are not covered by this warranty.

Page 25

inalto.house

5. You will bear the cost of transportation, travel and delivery of the Appliance to and from Residentia Group or its ASR. If you reside outside of the service area, you will bear the cost of:

(a) travel of an authorised representative; (b) transportation and delivery of the Appliance to and

from Residentia Group or its ASR, in all instances, unless the Appliance is transported by Residentia Group or its ASR, the Appliance is transported at the owner’s cost and risk while in transit to and from Residentia Group or its ASR.

6. Proof of purchase is required before you can make a claim under this warranty.

7. You may not make a claim under this warranty unless the defect claimed is due to faulty or defective parts or workmanship. Residentia Group is not liable in the following situations (which are not exhaustive):

(a) the Appliance is damaged by: (i) accident (ii) misuse or abuse, including failure to properly

maintain or service (iii) normal wear and tear (iv) power surges, electrical storm damage or

incorrect power supply (v) incomplete or improper installation (vi) incorrect, improper or inappropriate operation (vii) insect or vermin infestation (viii) failure to comply with any additional instructions

supplied with the Appliance; (b) the Appliance is modied without authority from

Residentia Group in writing;

been removed or defaced;

(d) the Appliance was serviced or repaired by anyone

other than Residentia Group, an authorised repairer or ASR.

8. This warranty, the contract to which it relates and the

relationship between you and Residentia Group are governed by the law applicable where the Appliance was purchased.

10. For Appliances and services provided by Residentia Group in Australia, the Appliances come with a guarantee by Residentia Group that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the Appliance repaired or replaced if the Appliance fails to be of acceptable quality and the failure does not amount to a major failure. The benets to you given by this warranty are in addition to your other rights and remedies under a law in relation to the Appliances or services to which the warranty relates.

11. At all times during the Warranty Period, Residentia Group shall, at its discretion, determine whether repair, replacement or refund will apply if an Appliance has a valid warranty claim applicable to it.

12. To enquire about claiming under this warranty, please follow these steps:

(a) carefully check the operating instructions, user manual

and the terms of this warranty;

(b) have the model and serial number of the Appliance

available;

13. You accept that if you make a warranty claim, Residentia Group and its ASR may exchange information in relation to you to enable Residentia Group to meet its obligations under this warranty.

IMPORTANT Before calling for service, please ensure that the steps in point 12 have been followed.

→ Service: Please call 1300 11 HELP (4357) → Spare parts: Please call 1300 11 SPARE (7727)

9. To the extent permitted by law, Residentia Group excludes all warranties and liabilities (other than as contained in this document) including liability for any loss or damage whether direct or indirect arising from your purchase, use or non use of the Appliance.

The Australian Consumer Law requires the inclusion of the following statement with this warranty: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Page 26

User Manual

This page is intentionally left blank

Page 27

inalto.house

Warranty Information

NEW ZEALAND WARRANTY TERMS & CONDITIONS LAUNDRY APPLIANCES

To help care for your investment, be sure to register your appliance online. Registration will help you if you need to arrange service in the future, and serves as a record of your purchase – including critical information like model number and serial number – that you can refer to at any time.

Simply visit the below website, or ask your retailer for help: https://inalto.house/nz /registration

WARRANTY:

These products are covered by a warranty for a period of 24 months from the date of purchase, subject to the following conditions*. The warranty covers rectiﬁcation free of charge of any fault arising from defective materials or components, or faulty workmanship or assembly. * The conditions above mentioned are:

1. That the purchaser carefully follows all instructions

packed with the product;

2. That the purchaser and/or installer carefully follows

the installation instructions provided and complies with electrical wiring regulations, gas and/or plumbing codes;

3. That the purchaser carefully follows instructions

provided in the owner’s handbook relating to the proper use and care of the product and does not use the product for any purpose other than the domestic use for which it has been designed;

4. Commercial use of the product for professional or

industrial purposes will void this warranty.;

5. That the product was purchased and installed in

New Zealand;

6. That this warranty does not extend to:

a) optional glass lids for hobs apart from claims

which relate to mechanical or physical damage

thereof at the date of purchase; b) ‘consumable’ parts such as light bulbs or ﬁlters; c) damage to ceramic glass caused by liquid or solid

spill-overs, lack of maintenance, or impact; d) damage to surface coatings caused by

cleaning or maintenance using products not

recommended by the owner’s handbook; e) defects caused by normal wear and tear,

accident, negligence, alteration, misuse or

incorrect installations; f) a product dismantled, repaired or serviced by any

serviceman other than an authorised

service agent; g) a product not in possession of the original

purchaser; h) damage caused by power outages or surges i) damage caused by pests (eg. rats,

cockroaches etc.)

7. That if the product is a freestanding microwave oven or small appliance it must be returned to the dealer/ retailer for servicing. These products, unless stated otherwise, have a 12 month warranty from original date of purchase with 24 months on the microwave magnetron; Waste disposers have a 12 month warranty.

8. The provision of service under this warranty is limited by a 25km boundary from the retailer where the product was purchased except for microwaves. Such travelling outside of these limits will incur commercial cost to be paid by you, regulated by the number of kilometres travelled beyond the 25km limit (50km return trip). Microwaves are to be delivered to the nearest authorised service agent by the customer.

Please refer to your user manual for any further conditions that may apply to your speciﬁc model.

Nothing herein contained shall be construed in any way as excluding or limiting your rights under the Consumer Guarantees Acts 1993.

For Service please visit www.applico.co.nz/service or contact the dealer/retailer from whom you purchased the product from or call the 0800 number listed below. If you are unable to establish the date of purchase, or the fault is not covered by this warranty, or if the product is found to be in working order, you will be required to bear all service call charges.

Registration of this warranty constitutes acceptance of the terms and conditions of this warranty.

Should you require any assistance, please call Customer Services on 0800 763 448.

Distributed by Applico Ltd. www.applico.co.nz July 2019

After registering your appliance online, we recommend you ﬁll out the below information for your reference and keep this warranty card in a safe place.

THIS WARRANTY IS VALID IN NEW ZEALAND ONLY.

Page 28

AN INITIATIVE BY RESIDENTIA GROUP

TEL. 1300 11 4357 [email protected] WWW.RESIDENTIA.GROUP