Inalto ICGW91, ICGW90S, ICGW71, ICGW70S User Manual
MODEL CODE/S
PRODUCT
DOCUMENT
ICGW71
ICGW70S
ICGW91
ICGW90S
GAS
COOKTOP
USER
MANUAL
USER MANUAL
PAGE 02
Dear Customer, Congratulations on purchasing your new gas cooktop.
The Inalto brand is proudly distributed within Australia
by Residentia Group Pty Ltd.
Please refer to the warranty card at the rear of this
manual for information regarding your product’s
parts and labour warranty, or visit us online at
www.residentiagroup.com.au.
At Residentia Group, we are customer obsessed and
our Support Team are there to ensure you get the most
out of your appliance. Should you want to learn more
about recommended cooking temperatures, the various
features of your cooktop, and importantly taking care
of your appliance when cleaning, our Support Team are
here to help. You can use our online Support Centre at
anytime by visiting http://support.residentiagroup.com.
au, or you can contact us via phone by dialling 1300 11
HELP (4357).
It is important that you read through the following use
and care manual thoroughly to familiarise yourself with
the installation and operation requirements of your
appliance to ensure optimum performance.
Again, thank you for choosing an Inalto appliance and
we look forward to being of service to you.
Kind Regards,
The Residentia Team
T 1300 11 4357
E info@residentiagroup.com.au
W residentiagroup.com.au
ACN
600 546 656
Residentia Group
PO Box 581
Stanhope Gardens
NSW Australia 2768
PAGE 03
PAGE CONTENT
04 SAFETY
INSTRUCTIONS
06 YOUR INALTO
COOKTOP
08 INSTALLATION
INSTRUCTIONS
18 CLEANING &
MAINTENANCE
19 TECHNICAL
DATA
20 WARRANTY
INFORMATION
22 PURCHASE
DETAILS
23 NOTES
USER MANUAL
SAFETY INSTRUCTIONS
PAGE 04
Your safety is of the utmost importance to. Please
make sure that you read this instruction booklet
before attempting to install or use the appliance. If
you are unsure of any of the information contained
in this booklet, please contact the Retailer where you
purchased your unit from.
The appliance should only be installed and connected
by a suitably qualified and authorised person, strictly in
accordance with the manufacturer's instructions. Please
see the specific section of this user manual that refers to
installation.
IMPORTANT!
The gas supply to the cooktop must be cut off before any
adjustments or maintenance work is undertaken.
WARNING
When using this product, basic precautions should always
be taken including the following:
► The appliance is designed for domestic household use
and for the cooking and frying of domestic foodstuffs.
► Care should be taken to ensure that the units and work
surfaces that you build the appliance into, meet with
the relevant standards.
► Not for use in Marine craft, caravans or mobile homes.
IMPORTANT!
The adjacent furniture and all materials used in the
installation must be able to withstand a minimum
temperature of 65°C above the ambient temperature
of the room it is located in, whilst in use.
► Certain types of vinyl or laminate kitchen cabinetry
are particularly prone to heat damage or discolouration
at temperatures above the guidelines given.
► Any damage caused by the cooktop being installed in
contravention of this temperature limit, will be the
liability of the owner.
► Your new cooktop is guaranteed against electrical or
mechanical defects, subject to certain exclusions that
are noted in the Warranty Terms and Conditions (at the
rear of this user manual). The foregoing does not affect
your statutory rights.
► The use of this cooktop for any other purpose or in any
other environment, without the express agreement
of Residentia Group, will invalidate any warranty or
liability claim.
► You should not use this appliance to store items on or
as a work surface.
► No modifications to the appliance are permitted by
Residentia Group.
► You should not store or place flammable or highly
flammable liquids/materials on top of or near the
appliance. Items made from aluminium, plastic
or plastic film should also be kept away from the
appliance, as they may fuse to the surface.
► Repairs may only be carried out by authorised service
agents.
► Your Inalto cooktop is not to be used by children or
persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction.
► Any film or stickers that are present on the cooktop
when it is delivered should be removed before use.
► Care should be used when utilising the cooktop,
otherwise there is a risk of burns being caused.
► You should not allow the electrical connection cables to
come into contact with the cooktop surface when it is
hot or any hot cookware.
► If fat and oil overheats, then it can ignite extremely
quickly. For this reason, when cooking with fat and oil
the appliance should not be left unattended.
► Make sure that all of the cooking zones are switched off
after use.
► Cleaning of the cooktop should be carried out on a
regular basis, once the cooktop has cooled down.
► Great care should be taken whilst using this appliance
and when following the cleaning procedure.
► You should not use a steam jet or any other high
pressure cleaning equipment to clean the appliance.
PAGE 05
DECLARATION OF CONFORMITY
This appliance complies with the following European
Directives:
— 2006/95/CE General regulations / Low tension
— 2009/142/CE Concerning gas appliances
— 1935/2004/CE 90/128/EEC This appliance is suitable to
come in contact with food
— 2004/108/CE Electromagnetic compatibility
— AS4551- Domestic gas cooking appliances
— Low voltage – 73/23
— Safety standards – EN 60335-1, EN30-1-1, AS/NZS 3350-
1,3350-2-6
The manufacturer declares that the cooktop is built using
certified materials and requires the appliance to be installed
in accordance with the standards currently in force. This
cooktop should only be used by a trained person and for
domestic purposes only.
UNPACKING
During transportation, protective packaging was used to
protect the appliance against any damage. After unpacking,
please dispose of all elements of packaging in a way that will
not cause damage to the environment. All materials used for
packaging the appliance are environmentally friendly; they
are 100% recyclable and are marked with the appropriate
symbol.
► During unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept out of
reach of children.
DISPOSAL OF THE APPLIANCE
Old appliances should not simply be disposed of with
normal household waste, but should be delivered to a
collection and recycling centre for electric and electronic
equipment. A symbol shown on the product, the instruction
manual or the packaging shows that it is suitable for
recycling.
Materials used inside the appliance are recyclable and are
labelled with information concerning this. By recycling
materials or other parts from used devices you are
making a significant contribution to the protection of our
environment.
Information on appropriate disposal centres for used
devices can be provided by your local authority.
USER MANUAL
YOUR INALTO COOKTOP
SPECIFICATIONS
PAGE 06
Connection points
diagram (left):
1. Front of cooktop
2. Gas connection point
3. Electrical connection point.
Above: ICGW71 & ICGW70S Above: ICGW91 & ICGW90S
MODEL PRODUCT DIMENSIONS
ICGW71 700mm, 510mm, 40mm 560mm x 480mm Gas: XXmm (from left), XXmm (from rear)
ICGW70S 700mm, 510mm, 40mm 560mm x 480mm Gas: XXmm (from left), XXmm (from rear)
ICGW91 860mm, 510mm, 40mm 830mm x 480mm Gas: XXmm (from left), XXmm (from rear)
ICGW90S 860mm, 510mm, 40mm 830mm x 480mm Gas: XXmm (from left), XXmm (from rear)
MODEL BURNERS NG OTHER
ICGW71
ICGW70S
ICGW91
ICGW90S
W×D×H
1 x 14.4 MJ/h triple crown (wok) burner
1 x 10.8 MJ/h rapid burner
2 x 6.5 MJ/h semi-rapid burners
1 x 3.6 MJ/h auxiliary burner
1 x 14.4 MJ/h triple crown (wok) burner
1 x 10.8 MJ/h rapid burner
2 x 6.5 MJ/h semi-rapid burners
1 x 3.6 MJ/h auxiliary burner
1 x 14.4 MJ/h triple crown (wok) burner
1 x 10.8 MJ/h rapid burner
2 x 6.5 MJ/h semi-rapid burners
1 x 3.6 MJ/h auxiliary burner
1 x 14.4 MJ/h triple crown (wok) burner
1 x 10.8 MJ/h rapid burner
2 x 6.5 MJ/h semi-rapid burners
1 x 3.6 MJ/h auxiliary burner
CUTOUT DIMENSIONS W×D CONNECTION POINT LOCATIONS
DIAGRAMS ABOVE
Electrical: XXmm (from right), XXmm (from rear)
Electrical: XXmm (from right), XXmm (from rear)
Electrical: XXmm (from right), XXmm (from rear)
Electrical: XXmm (from right), XXmm (from rear)
Front control operation
Automatic ignition
Heavy duty cast iron pan stands
Flame failure safety device on each burner
Side control operation
Automatic ignition
Heavy duty cast iron pan stands
Flame failure safety device on each burner
Front control operation
Automatic ignition
Heavy duty cast iron pan stands
Flame failure safety device on each burner
Front control operation
Automatic ignition
Heavy duty cast iron pan stands
Flame failure safety device on each burner
COOKTOP COMPONENTS
Your Inalto cooktop is supplied with:
► LPG conversion jets (optional use)
► Regulator
► Sealing strip
PAGE 07
BurnerMin.panbasediameterincm
Smallburner
10
Mediumburner
12
Largeburner
14
Wokburner
14
BurnerMin.panbasediameterincm
Smallburner
10
Mediumburner
12
Largeburner
14
Wokburner
14
Max.diameterattopofpanincm
Smallburner
22
Mediumburner
22
Largeburner
24
Wokburner
24
CONTROLS
The following symbols will appear on the control panel, next to each control knob:
¬ Gas off Large flame: maximum setting Small flame: minimum setting
► The minimum setting is at the end of the anti-clockwise rotation of the control knob.
► All operation positions must be selected between the maximum and minimum position.
► Never select a knob position between the maximum and off position.
Burner indicator
► The symbol above indicates which gas burner the knob operates.
AUTOMATIC IGNITION WITH FLAME FAILURE SAFETY DEVICE
Your Inalto cooktop is fitted with a flame failure safety device on each burner, which is designed to stop the flow of gas to
the burner head in the event of the flame going out.
To ignite a burner:
► Press in the control knob of the burner that you wish to light and turn it anti-clockwise to the maximum position.
► If you keep the control knob depressed, the automatic ignition for the burner will operate.
► You should hold down the control knob for 10 seconds after the flame on the burner has lit.
► After this 10-second interval, turn the control knob to your required setting between the maximum and minimum
setting symbols.
► To switch the burner off, turn the control knob fully clockwise to the gas off position.
► In case of power failure, the burners can be lit by carefully using a match.
SUITABLE PANS
► Refer to the chart below and ensure that the pan diameter falls within the minimum and maximum diameters given
for the burner to you using. A pan base which is too small will be unstable on the pan support. If the pan diameter is
too large, flames can spread out to the sides and damage or burn the worktop, wall claddings or surrounding units
and also parts of the cooktop. The manufacturer cannot be held liable for this type of damage.
▷ Wide, shallow pans are preferable to tall, narrow ones. They will heat up faster.
▷ Select pans which are suitable for the burner they are to be used on. In general: use larger diameter pans on the large
burners, and smaller diameter pans on the small burners.
▷ Pans with thick bases are preferable as these distribute heat more evenly. With thin bases, there is a danger of food
overheating in places. Stir the food frequently.
▷ Any heat-resistant pans can be used on a gas burner.
▷ Always place the pan on the pan support supplied with the cooktop. Do not place a pan directly on top of the burner.
▷ Remember when purchasing new pans that manufacturers usually refer to the diameter at the top of the pan in their
documentation.
▷ Use a lid whenever possible to minimise heat loss.
▷ When using a wok make sure that the base does not touch the burner. A distance of 1 cm should be maintained
between the burner and the base of the wok pan above it.
Warning! Place pots and pans flat on the cooktop trivets to ensure they do not tip over. Slight tilting cannot
always be avoided.
USER MANUAL
PAGE 08
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
It’s important to carefully read the following installation instructions before beginning the installation of your cooktop.
IMPORTANT!
► AS/NZS5601.1 Gas Installations - current edition
► NZS 5261 – Code of Practice for the Installation of Gas Burning Appliances and Equipment (New Zealand)
► Local gas fitting regulations
► AS/NZS 3000 – Electrical Installations (Wiring Rules)
► Building codes
► Installation Instructions
POSITIONING
The adjacent cabinetry and wall materials must be able to withstand a minimum temperature rise of 65°C above the
ambient temperature of the room.
The installation must be carried out by a suitably qualified and authorised person, in accordance with
the current version of the following:
760MM
NOT ALLOWED: RECOMMENDED:
► This appliance has been designed for use within a kitchen.
Important! The cooktop must not be installed in a bathroom or shower room.
This appliance is classified as Class 3 and therefore is to be built into a kitchen unit (depending on size) or 600mm deep
worktop, providing the following minimum distances are allowed:
► The minimum clearance from a combustible surface shall be a 200 mm horizontal distance from the periphery of any
gas burner (AS 5601). Where the horizontal clearance is less than 200mm, that vertical surface must be protected by
a non-combustible material for 150mm above the cooktop surface across the entire length (depth, width), indicated
below. The 150mm protected surface may be ceramic tiles or another approved non-combustible material.
► For the installation of your rangehood, a minimum safety clearance of at least 760 mm above the burner cap must be
maintained. For any flammable objects (i.e. utensil rails, wall cabinets, shelves, etc) a minimum clearance of at least
760 mm above the burner cap must be maintained between them and the cooktop below.
Loading...