Impex SM-2000 Owner's Manual

NOTE:

Please read all instructions

carefully before using this

product

Safety Notice

Hardware Identifier

Assembly Instruction

Parts List

Warranty

Ordering Parts

MARCY SMITH MACHINE

SM 2000

Model

SM 2000

Retain This

Manual for

Reference

07-30-01

OWNER'S

MANUAL

IMPEX FITNESS PRODUCTS

14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746

Tel: [phone] Fax: [phone]

www.impex-fitness.com

[e-mail]

TABLE OF CONTENTS

BEFORE YOU BEGIN....................................................................................……….. 1

IMPORTANT SAFETY NOTICES...................................................................……….. 2

HARDWARE IDENTIFIER.....….....................................................................……….. 3

ASSEMBLY INSTRUCTIONS.........................................................................……….. 4

EXPLODED DIAGRAM................................................................................................ 12

PARTS LIST…………………………………………………………………………………...13

WARRANTY.................................................................................................…………. 14

ORDERING PARTS.......................................................................................………… 14

BEFORE YOU BEGIN

Thank you for selecting the MARCY SMITH MACHINE SM 2000 by IMPEX
FITNESS PRODUCTS. For your safety and benefit, read this manual carefully
before using the machine. As a manufacturer, we are committed to provide you
complete customer satisfaction. If you have any questions, or find there are
missing or damaged parts, we guarantee you complete satisfaction through
direct assistance from our factory. To avoid unnecessary delays,

TOLL-FREE customer service number.

provide immediate assistance to you.

Our Customer Service Agents will

please call our

Toll-Free Customer Service Number

1-800-999-8899

Mon. - Fri. 9 a.m. - 5 p.m. PST

www.impex-fitness.com

[e-mail]

1



IMPORTANT SAFETY NOTICE

PRECAUTIONS

This exercise machine is built for optimum safety. However, certain precautions apply
whenever you operate a piece of exercise equipment. Be sure to read the entire manual
before you assemble or operate your machine. In particular, note the following safety
precautions:

Keep children and pets away from the machine at all times. DO NOT

1.

leave children unattended in the same room with the machine.

2. Only one person at a time should use the machine.

3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms, STOP the workout at once. CONSULT A PHYSICIAN
IMMEDIATELY.

4. Position the machine on a clear, leveled surface. DO NOT use the machine
near water or outdoors.

5. Keep hands away from all moving parts.

6. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the machine. Running
or aerobic shoes are also required when using the machine.

7. Use the machine only for its intended use as described in this manual. DO
NOT use attachments not recommended by the manufacturer.

8. Do not place any sharp object around the machine.

9. Disabled person should not use the machine without a qualified person or
physician in attendance.

10. Before using the machine to exercise, always do stretching exercises to
properly warm up.

11. Never operate the machine if the machine is not functioning properly.

12. A spotter is recommended during exercise.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR
PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF
35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL
INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES NO
RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY
OR THROUGH THE USE OF THIS PRODUCT.

SAVE THESE INSTRUCTIONS.

2
3

ASSEMBLY INSTRUCTION

Tools Required to Assemble the Machine: Two Adjustable Wrenches and Allen Wrenches
NOTE: It is strongly recommended this machine to be assembled by two or more people to
avoid possible injury.

STEP 1 (See Diagram 1)

A.) Connect the Main Base Frame (#3) to both Left & Right Base Frames (#1) & (#2). Secure

them with one Bracket (#7), two M10 x 3” Allen Bolt (#4), four ∅ ¾” Washers (#5), and two
M10 Aircraft Nuts (#6) on each end of the Main Base Frame.

B.) Attach one Front Vertical Beam (#9) to Left Base Frame (#1). Secure it with two M10 x 2 ¾”

Carriage Bolts (#11), ∅ ¾” Washers (#5), and M10 Aircraft Nuts (#6). Repeat the same
procedure to install the other Vertical Beam to the Right Base Frame (#2). Insert the Guide
Rods (#16) into the hole on the Left & Right Base Frame. Secure them with two M8 x 3/8”
Allen Set Screws (#60).

C.) Attach th e Middle Vertical Beam (#8) to the Main Base Frame (#3 ). Attach the Rear Stabilizer

(#10) to the rear of the Main Base Frame (#3). Secure them all together with two M10 x 3”
Allen Bolts (#4), four ∅ ¾” Washers (#5), and two M10 Aircraft Nuts (#6).

4