Impex NS-1101U User Manual

NOTE:

Please read all instructions

carefully before using this

product

Table of Contents

Safety Notice

Hardware Pack

Assembly Instruction

Parts List

Warranty

Ordering Parts

Magnetic-Resistance

Upright Bike

NS-1101U

Model

NS-1101U

Retain This

Manual for

Reference

120315

ASSEMBLY &

OWNER'S MANUAL

IMPEX® INC.

2801 S. Towne Ave, Pomona, CA 91766

Tel: (800) 999-8899 Fax: (626) 961-9966

www.impex-fitness.com

info@impex-fitness.com

TABLE OF CONTENTS

BEFORE YOU BEGIN...................................................................................…. 1

IMPORTANT SAFETY NOTICES..................................................................…. 2

WARNING LABEL PLACEMENT……………………………………………………. 3

HARDWARE PACK……….....…....................................................................…. 4

ASSEMBLY INSTRUCTIONS........................................................................…. 6

EXPLODED DIAGRAM………………………………………………………………. 13

PARTS LIST...................................................................................................… 14

CARE, MAINTENANCE, AND STORAGE………………………………………… 15

OPERATING NOTES………………………………………………………………… 15

COMPUTER…………………………………………………………………………… 16

EXERCISE GUIDELINES……………………………………………………………. 17

WARRANTY.................................................................................................…. 19

ORDERING PARTS.....................................................................................….. 19

BEFORE YOU BEGIN

Thank you for selecting the MARCY Magnetic-Resistance Upright Bike NS-1101U by

®

IMPEX

INC. For your safety and benefit, read this manual carefully before using the bike. As a manufacturer, we are committed to provide you complete customer satisfaction. If you have any questions, or find there are missing or damaged parts, we guarantee you complete satisfaction through direct assistance from our factory. To avoid unnecessary delays, please call our TOLL-FREE customer service number. Our Customer Service Agents will provide immediate assistance to you.

Toll-Free Customer Service Number

1-800-999-8899

Mon. - Fri. 9 a.m. - 5 p.m. PST

www.impex-fitness.com

info@impex-fitness.com

1

IMPORTANT SAFETY NOTICE

PRECAUTIONS

This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions:

1. Keep children and pets away from the machine at all times. DO NOT leave

children unattended in the same room with the machine.

2. Only one person at a time should use the machine.

3. If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.

4. Position the machine on a clear, leveled surface. DO NOT use the machine near water or outdoors.

5. Keep hands away from all moving parts.

6. Always wear appropriate workout clothing when exercising. DO NOT wear robes or other clothing that could become caught in the machine. Running or aerobic shoes are also required when using the machine.

7. Use the machine only for its intended use as described in this manual. DO NOT use attachments not recommended by the manufacturer.

8. Do not place any sharp object around the machine.

9. Disabled person should not use the machine without a qualified person or physician in attendance.

10. Before using the machine to exercise, always do stretching exercises to properly warm up.

11. Never operate the machine if the machine is not functioning properly.

12. Read all warnings posted on the exercise bike.

13. Inspect the exercise bike for worn or loose component prior to use. Tighten/replace any loose or wore components prior to use.

14. Care should be taken in mounting or dismounting the exercise bike.

15. This exercise bike is for consumer and home use only.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT. SAVE THESE INSTRUCTIONS.

2

WARNING LABEL PLACEMENT

The Warning Labels and Caution Label shown here have been placed on the Rear Stabilizer. If the labels are missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the labels in location shown.

3

HARDWARE PACK

NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size.

NO. DESCRIPTION IDENTIFIER Q’TY

7 Spacer 1

20 M8 x 3” Allen Bolt

16 Ø ¾” Curved Washer

21 Ø ½” Lock Washer

5 M5 x 1” Philips Screw

8 T-shaped Lock knob

Allen wrench

Crossing wrench

4

1

COMPONENTS FOR ASSEMBLY

5

ASSEMBLY INSTRUCTION

 Tools Required For Assembling the Machine: One Crossing Wrench and Allen Wrench,

provided by manufacturer.

 NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury.

STEP-1

A.) Attach the Front Stabilizer (#19) to the Main Frame (#26). Secure it with two M8 x 3” Allen Bolts (#20),

two Ø ½” Lock Washers (#21), and two Ø ¾” Curved Washers (#16).

B.) Attach the Rear Stabilizer (#29) to the Main Frame (#26). Secure it with two M8 x 3” Allen Bolts (#20),

two Ø ½” Lock Washers (#21), and two Ø ¾” Curved Washers (#16).

6

STEP 2

A.) Thread the Left Pedal (#27) counterclockwise into the Crank (#28). B.) Thread the Right Pedal (#25) clockwise into the Crank (#28).

7

STEP 3

A.) NOTE: Extra help may be needed to hold the Front Post (#4) while connecting the cables

and wires.

B.) Remove the four M8 x ¾” Allen Bolts (#15) and four Ø ¾” Curved Washers (#16) pre-installed by

factory from Front Post (#9). Slide the Front Cover (#18) onto the Front Post (#9).

C.) Attach the Front Post (#9) to the Main Frame (#26). Connect the Middle Computer Wire (#4) from

the bottom of the Front Post to the Lower Computer Wire (#22) from the Main Frame.

D.) Pull the tension connector from the Upper Tension Cable (#17) and slide in between the opening

on the connector on the Lower Tension Cable (#23). Pull the Upper Tension Cable upward and

slide the wire through the slot on the bracket. E.) Drop down the Upper Tension Cable so the fitting sits firmly on top of the bracket. F.) Secure the Front Post to the Main Frame with the four M8 x ¾” Allen Bolts (#15) and four Ø ¾”

Curved Washers (#16).

8

STEP 4

A.) Attach the Handle (#2) to the Front Post (#9). B.) Insert the two Pulse Sensor Wires (#3) through the open slot on Front Post and then pull up and

out of the Front Post. C.) Clamp the Handle to the Front Post. Secure it with T-shaped Lock Knob (#8), Spacer (#7), and

the Clamp Cover (#6).

9

STEP 5

A.) Connect the Middle Computer Wire (#4) to the computer wire. B.) Connect the two Pulse Sensor Wires (#3) to the sensor wire from Computer (#1). C.) Slide the Computer onto the Front Post (#9). Secure it with one M5 x 1” Philips Screw

(#5).

10

STEP 6

A.) Insert the Seat Post (#14) into the Main Frame (#26). Use the Quick Release Knob (#24) to

securely lock the Seat in position.

B.) Remove M5 x 5/8” Philips Screw (#10) pre-installed by factory from Front Post (#9). Attach

the Water Bottle Rack (#11) to Front Post (#9). Secure it with two the M5 x 5/8” Philips Screws (#10) previously removed from the Rack.

11

STEP 7

A.) Attach the Seat (#13) onto the Seat Post (#14). Secure the Seat with pre-installed round bracket,

bolt, and nuts underneath the Seat.

B.) Place the Water Bottle (#12) into the Water Bottle Rack (#11).

12

EXPLODED DIAGRAM

13

PARTS LIST

PART NO. DESCRIPTION SPEC. QUANTITY

1 Computer 1 2 Handle 1 3 Pulse Sensor Wire 2 4 Middle Computer Wire 1 5 Philips Screw M5 x 1” 1 6 Clamp Cover 1 7 Spacer 1 8 T-shaped Lock Knob 1

9 Front Post 1 10 Philips Screw M5 x 5/8” 2 11 Water Bottle Rack 1 12 Water Bottle 1 13 Seat w/Towel Bracket 1 14 Seat Post 1 15 Allen Bolt M8 x ¾” 4 16 Curved Washer Ø ¾” 8 17 Tension Knob w/Upper Tension Cable 1 18 Front Cover 1 19 Front Stabilizer 1 20 Allen Bolt M8 x 3” 4 21 Lock Washer Ø ½” 4 22 Lower Computer Wire 1 23 Lower Tension Cable 1 24 Quick Release Knob 1 25 Right Pedal 1 26 Main Frame 1 27 Left Pedal 1 28 Crank 2 29 Rear Stabilizer 1

14

CARE, MAINTENANCE AND STORAGE

1. Inspect and tighten all parts each time you use the machine. Replace any worn parts immediately.

2. The bike can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents.

3. Store the bike IN-DOOR. Excess moisture and water would cause rust on the frame.

4. The Bike shall be placed at least 24 inches away from the wall or/and any other object such as furniture to provide safe access to and passage around the machine.

5. To avoid possible injury, the help of two or more people are needed when moving the machine around.

6. Disposal Instructions – The equipment can be safely disassembled and disposed without unreasonable hazards. Call your local recycle agency regarding details of recycling.

7. The maximum user weight is 300 lbs.

8. Assembled Dimension: L 37” x W 21” x H 56”

OPERATING NOTES

ADJUSTMENT

1. Use the Tension Knob on Front Post to adjust the resistance for exercise.

2. Use the T-shaped Lock Knob to adjust the Handle angle.

3. The seat height can be adjusted for 9 different height ranges from 34” to 43”. Loosen and

pull out the Lock Knob. Slide the Seat Post to selected scale marked on the Seat Post, then release the Lock Knob and securely fasten the Knob to lock the Seat Post.

4. The seat can be adjusted forward or backward and hold in position by using the Knob under

the sliding tube.

TRANSPORT

The Bike has a pair Roller End Caps on Front Stabilizer. To move, carefully hold and tilt the Handle, and then roll.

15

COMPUTER

Set Up Time and Date

1. To set up time and date; remove batteries for few seconds, and then place batteries back.

The computer will beep and display “8888” and then display Time/Date field.

2. Press “MODE” key to enter the Time or Date field.

3. Press “SET” key to set time/Date data.

4. After Time and Date has been set up, press “Mode” key to save all data entered.

When the Computer has been inactive for 4 minutes, it will go into idle mode: displaying only the Temperature, Time, and Date.

SCAN

Press “MODE” button, the computer will automatically scan TIME→DISTANCE→KJOULE→PULSE-SPEED/RPM for every 6 seconds.

Display Time Display the elapsed time. Max value is up to 99:59 Distance Display the distance traveled in Kilometers. Max value is 99.99 Kilometers.

Kjoule (Calories) Display the calorie consumption. 1Kjoule = 0.239Kcal. Pulse Display the heart pulse per minute during exercises.

Set Up Target Exercise Data

Press “MODE” button to switch between the Time, Distance, Kjoule (Calories), Pulse fields. Press “SET” button to enter value for each field.

Consult your physician to determine your normal resting heart rate Pulse value. The default value is 72.

Press “RESET” button to reset value to zero for each field. The computer will count down all set up values when exercise started.

Recovery

Press the “RECOVERY” button and hold onto the two Pulse Sensors on Handle with both hands. The computer will display “60” and start count down until zero to measure your heart rate recovery. Recovery ranges from F1 (fastest-best recovery) to F6 (slowest-worst recovery). Performing regular and continuous cardio exercises will help improve the Recovery score.

REPLACING BATTERY:

1. Remove the battery cover on the back of the computer. Replace two 1.5V (AA) batteries.

2. Make sure the batteries are installed correctly and the polarities are correct.

3. If the display is not clear or only partial segments appeared, remove the batteries and wait for

4. The battery life is approx. 3 months under normal usage.

5. When the batteries are removed, all the functional values will reset to zero.

Note: Please note all values on this computer are approximate and they are for comparison purpose only. Do not use these values for any medical or rehabilitation purpose.

1km = 0.62 miles.

15 seconds before re-install them.

16

EXERCISE GUIDELINES

Using your MAGNETIC BIKE

fitness, tone muscle and in conjunction with calorie controlled diet help you lose weight.

1. The Warm Up Phase

This stage helps get the blood flowing around the body and the muscles working properly. It will also reduce the risk of cramp and muscle injury. It is advisable to do a few stretching exercises as shown below. Each stretch should be held for approximately 30 seconds, do not force or jerk your muscles into a stretch - if it hurts, STOP.

SIDE BENDS OUTER THIGH

2. The Exercise Phase

This is the stage where you put the effort in. After regular use, the muscles in your legs will become more flexible. Work to your but it is very important to maintain a steady tempo throughout. The rate of work should be sufficient to raise your heartbeat into the target zone shown on the graph below.

will provide you with several benefits, it will improve your physical

FORWARD

BENDS

INNER THIGH

CALF / ACHILLES

This stage should last for a minimum of 12 minutes though most people start at about 15-20 minutes

17

3. The Cool Down Phase

This stage is to let your Cardio-vascular System and muscles wind down. This is a repeat of the warm up exercise e.g. reduce your tempo, continue for approximately 5 minutes. The stretching exercises should now be repeated, again remembering not to force or jerk your muscles into the stretch. As you get fitter you may need to train longer and harder. It is advisable to train at least three times a week, and if possible space your workouts evenly throughout the week.

MUSCLE TONING

To tone muscle while on your MAGNETIC BIKE you will need to have the resistance set quite

high. This will put more strain on our leg muscles and may mean you cannot train for as long as you would like. If you are also trying to improve your fitness you need to alter your training program. You should train as normal during the warm up and cool down phases, but towards the end of the exercise phase you should increase resistance making your legs work harder. You will have to reduce your speed to keep your heart rate in the target zone.

WEIGHT LOSS

The important factor here is the amount of effort you put in. The harder and longer you work the more calories you will burn. Effectively this is the same as if you were training to improve your fitness, the difference is the goal.

18

IMPEX® INC.

LIMITED WARRANTY

IMPEX Inc. ("IMPEX®") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's option.

All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained by calling IMPEX Customer Service Department at 1-800-999-8899. All freights for products return to IMPEX must be prepaid by the customer. This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an IMPEX authorized service center or for products used for commercial or rental purposes. No other warranty beyond that specifically set forth above is authorized by IMPEX.

IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or other damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other consequential damages or whatsoever natures. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.

The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you.

This warranty gives you specific legal right. You may also have other rights which vary from state to state.

Register on-line www.impex-fitness.com

IMPEX

2801 S. Towne Ave.

Pomona, CA 91766

ORDERING REPLACEMENT PARTS

Replacement parts can be ordered by calling our Customer Service Department toll-free at 1-800-999-8899 during our regular business hours: Monday through Friday, 9 am until 5 pm Pacific standard time.

info@impex-fitness.com

When ordering replacement part, always give the following information.

1. Model

2. Description of Parts

3. Part Number

4. Date of Purchase

®

INC.

19