Impact UP-7D User manual

UP-7D

7´ Parabolic Umbrella Diffuser

INSTRUCTIONS

Introduction

Thank you for choosing the Impact 7’ Parabolic Umbrella Diffuser. This
lighting accessory transforms your regular lighting umbrella into a
giant softbox, projecting a big, even wash over your subjects with only
a 1/2 stop loss in brightness. This diffuser is perfect for group shots or
scenarios where you need a wide, softened lighting result.

Instructions

1. Remove the diffuser from the
carrying case and unfold.

2. Put the umbrella shaft through
the hole in the center of
the diffuser and attach the
umbrella shaft to your strobe
normally.

2

3. Drape the fabric over the front
of the umbrella, putting the
diffuser over the edges of the
umbrella.

In the Box:

• Diffuser

• Carrying case

Specications UP-7D

Diameter 7´ (2.1 m)

Weight (diffuser only) 0.5 lb. (227 g)

4. Draw the sleeve of the
diffuser’s center hole over the
strobe.

5. Tighten the diffuser’s draw
string around the strobe head
to secure.

3

One-Year Limited Warranty

This IMPACT product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a period of
one (1) year from the original purchase date or thirty (30) days after replacement,
whichever occurs later. The warranty provider’s responsibility with respect
to this limited warranty shall be limited solely to repair or replacement, at the
provider’s discretion, of any product that fails during normal use of this product in
its intended manner and in its intended environment. Inoperability of the product
or part(s) shall be determined by the warranty provider. If the product has been
discontinued, the warranty provider reserves the right to replace it with a model
of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS
WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. This warranty provides you with specic legal rights, and
you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Impact Customer Service Department
to obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Impact along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.impactstudiolighting.com
or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

IMPACT is a registered trademark of the Gradus Group.

© 2014 Gradus Group LLC. All Rights Reserved.

GG1