Impact SRP-116, SRP-117, SRP-118, SRP-123, SRP-119 User manual

Wall Plate

SRP-115 SRP-123SRP-116SRP-117SRP-119

Thank you for choosing Impact.

The Impact SRP Wall Plates mount to any flat surface, including
set walls and apple boxes. You can use a wall plate as a low
stand by fixing it to the floor and mounting a fixture directly onto
the 5/8” stud or receiver. Since wall plates take up less room
than tripod legs, you can fit them into tighter spots where stands
or clamps are inconvenient to use.

The Impact SRP-115, 116, and 117 Wall Plates feature welded
steel baby pins 3”, 6”, and 9”, respectively, and the Impact SRP­119 has a baby pin set at a right angle. The SRP-123 features a
5/8” baby receiver that allows the plate to be used as a small
speaker or monitor platform, as well as a low stand. All wall
plates have eight anchor points, and all baby pin wall plates
feature a small hole for a safety cable (not included).

Specifications

• Stud size – 5/8” (SRP-115,
116, 117, 119)

• Receiver size – 5/8” (SRP-123)

• Color – silver

• Material – chrome steel