Impact BHE-106 User manual

Limited One Year Warranty

Impact Studio Lighting provides a limited warranty that this product is free from
defects in materials and workmanship to the original purchaser under normal use
for a period of one (1) year from the original purchase date or thirty (30) days after
replacement whichever occurs later. Our responsibility with respect to this
limited warranty shall be limited solely to repair or replacement, at its option, of
any product which fails during normal consumer use. To obtain warranty
coverage during the Warranty Period, contact your place of purchase (“Seller”)
to obtain a return merchandise authorization (“RMA”) number, and return to
Seller the defective product along with proof of purchase and the RMA number.
This warranty does not extend to damage or failure which results from misuse,
neglect, accident, alteration, abuse, improper installation or maintenance.
EXCEPT AS PROVIDED HEREIN, IMPACT STUDIO LIGHTING MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT
NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. This warranty provides you with specic legal
rights, and you may also have additional rights which vary from state to state.

© Copy right 2 013 Gradus G roup

For our other lighting equipment,

please visit our Web site

impact

BHE-106 Extension Arm 6″
with Spigot for Super Clamp

www.impactstudiolighting.com

Introduction

Thank you for choosing Impact .

Congratulations on your purchase of the Impact BHE-106 E xtension Arm 6 ″
with Spigot for Super Clamp. This extension arm features a baby (5 /8 inch)
receiver and comes with a double-ended 5/8 inch spigot, which has a
1/4″-20 and 3/8 inch threaded post on either side. T he ex tension arm
mounts to a super clamp, so you can mount a camera, lighting x ture, or
light modier to it.

Recommended Accessories

• Impact BHE-108 Flex Arm for Super Clamps

• Impact BHE-102 Heavy Dut y Flex Arm for Super Clamps

• Impact SRP-107 4.7 ″ Snap-in Pin for Super Clamps

• Impact F B-2 30L Compact Flash Bracket with Two Locking Shoes

• Impact BHE-104 Camera Bracket Plat form for Holding Arms

• Impact BHE-107 Two-Section Ar ticulated Arm

Visit our website at www.ImpactStudioL ighting.com for more Impact
accessories.

INSTRUCTIONS

Specications

Spigot size: 5/8 in.

Receiver size: 5/8 in.

Thread size: 1/4″-20 and 3/ 8 in.

Maximum load capacit y: 8 lb.

Warnings ⚠

• Please read and follow these instructions, and keep this manual in a

safe place.

• Handle the unit wit h care.

• Clean the unit with a sof t, dry cloth.

• Keep this unit away from children.

• Make sure everything is secure before proceeding.

• Make sure the item is intact and that there are no missing par ts.

• Do not exceed the maximum load capacity.

• Use caution when mounting a product at the maximum load capacit y.

• All photos are for illustrative purposes only.