Page 1
Beauty Dish Mounting Adapter
INSTRUCTIONS
Page 2
Introduction
Thank you for choosing Impact.
Congratulations on the purchase of your Impact Beaut y Dish Mount ing
Adapter. This adapter will mount your Impact Beauty Dish onto your strobe
light.
The Impact Beaut y Dish reects and diffuses light to create a shadowless
effect that offers greater contras t and texture than a soft box or an
umbrella. Because beaut y dishes produce a natural-looking catch light,
they are ideal for fashion and por trait photography.
Mounting Adapter
Catalog Number
BDA-ALI
BDA-BRO-L
BDA-BRO-S
BDA-COM
BDA-ELI
BDA-EXC
BDA-HEN
BDA-IMP
BDA-MUL-L
BDA-MUL-S
BDA-NOR-A
BDA-NOR-BPN
BDA-NOV
BDA-PHO
BDA-PRO
BDA-SPE
All photos are for illust rative purposes only. Flash units, lamp s, and light stands are
not included wit h the Impact Beauty Di sh unless purchased as a ki t.
Compatibility
Paul C. Buff Alien Bee, Einstein, White Lightning,
and Zeus; Balcar; Flashpoint
Broncolor Primo, Pulso, and Flashman
Broncolor Impact; Hasselblad Vista; Visatec
Comet; Dynalite SH and AH
Elinchrom; Impact EX; Calumet Genesis; Intert EX
SP Systems Excalibur
Hensel
Impact; Bowens; Calumet Travelite; Cowboy;
Intert Stellar; JTL; Photoex; Rime Lite; Westcott
Multiblitz Magnolite, Magnolux, Ministudio,
Variolite, and Xenolux; Flashpoint II
Multiblitz Prolite, Prolux, and Minilite
Norman Allure
Norman LH
Novatron
Photogenic; Norman Monolight
Profoto
Speedotron Black, and Brown M11
Page 3
Setting Up Your Beauty Dish
In order to mount your Impact Beauty Dish, you will need to purchase and
install the proper mounting adapter.
1 2
Remove the thumbscrew and
washer by rotating the
thumbscrew.
Slide the mounting adapter into the
brackets on the back of the beaut y
dish.
3 4
Inser t the thumbscrew and washer
into the threaded hole and rot ate
clockwise to tighten.
Note: For instructions on how to mount your Impact Beauty Dish, refer to
your strobe’s instruction manual.
Mount the Impact Beaut y Dish
onto your strobe ligh t.
Page 4
One-Year Limited Warranty
This IMPACT product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a period of
one (1) year from the original purchase date or thirty (30) days after replacement,
whichever occurs later. The warranty provider’s responsibility with respect
to this limited warranty shall be limited solely to repair or replacement, at the
provider’s discretion, of any product that fails during normal use of this product in
its intended manner and in its intended environment. Inoperability of the product
or part(s) shall be determined by the warranty provider. If the product has been
discontinued, the warranty provider reserves the right to replace it with a model
of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS
WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. This warranty provides you with specic legal rights, and
you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department
to obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Impact along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com
or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
IMPACT is a registered trademark of the Gradus Group.
© 2014 Gradus Group LLC. All Rights Reserved.
GG2
Loading...