Impact 10052590 User manual

Flash Cable Instructions

Introduction

This flash cable is made with high-quality, wear­resistant insulated wires. It connects your battery
pack to your flash. The mechanism ensures a
secure connection between the battery pack
and the cable. This cable is compatible with
major battery pack brands, including Quantum,
Lumedyne, Dynalite, and Impact.

Warnings

• Use only as instructed. Both terminal connectors
output high voltage.

• Only connect your flash unit to your battery pack
with a cable that is compatible with both.

• Do not use if any wire is exposed as a result of
damage or wear.

• Keep out of reach of children.

• Make sure the cable is firmly connected at both
ends when using your battery pack.

• Unplug this cable from the sockets on the
battery pack and flash unit when it is not in use.

Instructions

1. Plug the 5-pin metal connector of the cable rmly
into the output socket on your battery.

2. Plug the other end of the cable securely into the
compatible power port on your ash unit.

Flash Cable Instructions

For use with other battery pack brands, follow the instructions provided by the battery pack manufacturer.

Important! Load your flash unit with its standard batteries before connecting it to your battery pack. Most
compatible flash units require the standard batteries to be installed in order to power the computer functions that
allow the flash to work.

ONE-YEAR LIMITED WARRANTY

Impact provides a limited warranty to the original purchaser that this product is free from defects in materials and
workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30)
days after replacement, whichever occurs later. Impact’s responsibility with respect to this limited warranty shall be
limited solely to repair or replacement, at Impact’s discretion, of any product that fails during normal consumer use.
Inoperability of the product or part(s) shall be determined by Impact. If the product has been discontinued, we reserve
the right to replace it with a model of equivalent quality and function. To obtain warranty coverage, contact Impact to
obtain a return merchandise authorization (“RMA”) number, and return the defective product to Impact, along with the
RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk. This warranty
does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or
maintenance. EXCEPT AS PROVIDED HEREIN, IMPACT MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have
additional rights that vary from state to state.

www.impactstudiolighting.com

Copyright © 2013 Gradus Group

Made in China