Image 831.10815 User Manual
USER’S MANUAL
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through
direct assistance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained technicians on our customer hot line
will provide immediate assistance, free of charge to you.
CUSTOMER HOT LINE:
1-888-936-4266
Mon.–Fri., 8:00 am–6:30 pm;
Eastern Standard Time
(excluding holidays)
Model No. 831.108150
Serial No.
Write the serial number in the
space above for reference.
Patent Pending
CAUTION
Read all precautions and
instructions in this manual
before using this equipment.
Save this manual for reference.
Serial
Number
Decal
®
SEARS CANADA, INC., TORONTO, ONTARIO M5B 2B8
Visit our website at
www.imagefitness.com
new products, prizes,
fitness tips, and much more!
Warning Decal Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Choosing a Location for the Hydrotherapy Spa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using the Hydrotherapy Spa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Trouble-shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Limited 90-Day Spa Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Ordering Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
Note: A PART LIST and an EXPLODED DRAWING are attached in the center of this manual.
2
Table of Contents
The decals shown below have been placed on the spa. If a decal is missing, or if it is not legible, please
call our Customer Service Department toll-free at 1-888-936-4266, Monday–Friday, 8:00 am–6:30 pm
Eastern Standard Time (excluding holidays), to order a replacement decal. Apply the replacement decal
in the location shown.
Please take the time to read the important information on the decals shown at the left and then
remove the decals before you use the spa.
Warning Decal Placement
3
WARNING: To reduce the risk of drowning, electric shock, or serious injury, read the following
important precautions before using the spa.
READ AND FOLLOW ALL INSTRUCTIONS
1. It is the responsibility of the owner to ensure
that all users of the spa are adequately
informed of all precautions.
2. Use the spa only as described in the manual.
3. The spa is intended for home use only. Do
not use the spa in any commercial, rental or
institutional setting.
4. Use the spa only on a level surface. Do not
use the spa on carpet or other materials that
could be damaged by moisture. Do not use
the spa on rough or sharp surfaces such as
gravel or wood chips.
5. The spa will weigh approximately 2,339
pounds when it is assembled and filled with
water. Be sure that the location you select for
the spa will support this weight, plus the
weight of the occupants.
6. Inspect and tighten all parts regularly.
Replace any worn parts immediately.
7. DANGER—Risk of injury: Do not remove or
alter the covers on the suction fittings. Never
operate the spa if the suction guard is missing or broken. Keep hair and body away from
the suction guard. If you need to replace a
suction fitting, be sure that the flow rate of
the replacement is compatible.
8. Do not bring any object into the spa that
could puncture the liner.
9. Never insert any object into any opening.
10. Do not sit on the spa cover or place objects
on it; it is not designed to support weight.
11. Remove any water that may collect on the
spa cover.
12. Keep children and pets away from the spa
when it is not in use.
13. Keep all chemicals away from children and
pets.
14. The pH and chemical balance of the water
must be maintained as explained in this manual (see page 13). Failure to do so may cause
injury to users or damage to the spa jet unit,
and will void the warranty.
15. The water pump in the spa jet unit must be
primed before you use the spa the first time.
You must also prime the pump before using
the unit each time you refill the spa or clean
the filter. The spa jet unit may be seriously
damaged if the pump is not properly primed
(see PRIMING THE SPA JET UNIT on page
10).
16. DANGER—When connecting the power cord
(see PLUGGING IN THE SPA on page 10),
plug the power cord directly into a grounded
circuit capable of carrying 15 or more amps.
No other appliance should be on the same
circuit. Replace the power cord immediately
if damaged.
17. Do not use an extension cord with the spa.
This could damage the motor and the electrical system and it will void the warranty.
18. DANGER—If you will be using the spa outside, do not bury the power cord; you should
also keep the power cord away from lawn
mowers, hedge trimmers, and other similar
equipment.
19. WARNING—The power cord is equipped with
a Ground Fault Circuit Interrupter (GFCI),
located at the end of the power cord. The
GFCI must be tested before each use. To test
the GFCI, press the “test” button while the
spa jet unit is running. The spa jet unit
should shut off. Press the “reset” button.
The spa jet unit should resume normal operation. If the spa jet unit continues to run after
the “test” button is pressed, then the GFCI is
damaged. Do not use the spa until the GFCI
Important Safety Instructions
4
has been repaired or replaced by a qualified
electrician.
20. Keep all electrical appliances such as radios,
telephones, televisions, and lights at least
five feet (1.52 meters) away from the water.
21. DANGER—Risk of electric shock: Do not set
up the spa within five feet of any metal
objects or surfaces.
22. DANGER—Risk of drowning: Exercise
extreme caution to prevent unauthorized and
unsupervised use of the spa by children.
Children must always be supervised.
23. DANGER—To reduce the risk of drowning:
• Never use the spa alone;
• Children should not use the spa unless
they are supervised by an adult;
• Keep pets away from the spa at all times;
• Always replace and lock the spa cover
when the spa is not in use.
24. WARNING—To reduce the risk of injury: The
water temperature should never exceed
104°F (40°C). Temperatures between 100°F
(38°C) and 104°F (40°C) are considered to be
safe for healthy adults. However, if you plan
to remain in the spa for more than 10 to 15
minutes, a lower temperature is recommended. Lower temperatures are also recommended for children.
25. WARNING—To reduce the risk of injury:
Always use an accurate thermometer to
determine the water temperature before
using the spa.
26. WARNING—To reduce the risk of injury:
Pregnant women should consult with their
physician before using the spa. Pregnant
women should not use the spa if the water
temperature is above 100°F (38°C); the
unborn child could be seriously harmed.
27. DANGER—To reduce the risk of drowning:
Prolonged immersion in the spa may cause
hyperthermia, a dangerous condition which
occurs when the internal body temperature
rises several degrees above the normal body
temperature of 98.6°F (37˚). The symptoms of
hyperthermia are nausea, dizziness, drowsiness, and fainting. Effects include: a lack of
awareness, inability to perceive heat or danger, and a greater risk of drowning due to a
loss of consciousness. Special note:
Individuals suffering from hyperthermia may
be unable to realize that they must exit the
spa, and they also may be physically unable
to do so.
28. WARNING—To reduce the risk of drowning:
Heat from the water, in conjunction with alcohol or drugs can cause unconsciousness. Do
not use the spa if you are under the influence of drugs or alcohol.
29. WARNING—To reduce the risk of injury or
drowning: Consult your physician about possible side-effects of any medications you may
be taking before using the spa. Heat from the
water, in conjunction with some medications
may cause drowsiness and increase the risk
of drowning. Others can effect blood pressure, heart rate, and circulation.
30. WARNING—To reduce the risk of injury: It is
especially important for persons over the
age of 35 or persons with pre-existing health
problems, such as obesity, heart disease,
high or low blood pressure, circulatory problems, or diabetes to consult your physician
before using this product.
31. If you feel pain or dizziness at any time while
using the spa, discontinue use and contact a
physician.
WARNING: Read all instructions before using the spa. ICON assumes no responsibility for personal
injury or property damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
5
Thank you for selecting the IMAGE®RENEW 815. The
innovative spa offers the features and quality of a traditional hot tub at an affordable price. Best of all, the
spa is fully portable, so you can take it wherever there
is an electrical outlet. The spa allows you to relax and
unwind in the comfort of your own home.
For your benefit, read this manual carefully before
using the IMAGE
®
RENEW 815. If you have addition-
al questions, please call our Customer Service
Department toll-free at 1-888-936-4266,
Monday–Friday, 8:00 am–6:30 pm Eastern Standard
Time (excluding holidays). To help us assist you,
please note the product model number and serial
number before calling. The model number is
831.108150. The serial number can be found on a
decal attached to spa jet unit (see the front cover of
this manual).
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Dry Side
Jet Pack
Wood Surround
Note: When the
spa is filled with
water, the Wood
Surround may bow
slightly; this is a
normal condition.
Locking Buckle
Console
Spa Cover
Power Cord
Ground Fault Circuit
Interrupter (GFCI)
Wet Side
Jet Pack
Jets
Filter
Pillow
Locking Buckle
This Section
fits the Dry
Side Jet Pack
Before You Begin
6
There are many factors to consider when choosing a location to set up the spa. These factors vary depending
on whether you use the spa inside or outside. We have listed several factors you may wish to consider as you
decide where you want to use the spa.
If you set up the spa inside:
1. The spa will increase the level of humidity in your
home. The location you choose should be well
ventilated. You may need to install a ventilation
fan or use a dehumidifier.
2. The location must be close to an electrical outlet.
An extension cord cannot be used with the
spa
3. The spa should be close to a source of water.
4. Do not use the spa on carpet or other material
that may be damaged by moisture. We recommend that you place the spa on a water and stain
resistant, non-slip surface with a floor drain for any
water that may splash from the spa.
5. Be sure that the location you choose is stable. It
must be able to support the weight of the spa
when it is filled with water, plus the weight of the
occupants. The spa weighs approximately 2,339
pounds when filled with water.
6. Do not use the spa above a finished living area,
due to the risk of water damage.
7. Be sure that there is room around the spa to permit servicing of the unit. The diameter of the tub is
69”. You should allow for this size, plus the size of
the spa jet unit plus room to remove the cover,
when choosing the location.
8. Be sure to note any other considerations, such as
aesthetics or privacy concerns, that may affect the
safety or enjoyment of using the spa.
If you set up the spa outside:
1. You should check your local building codes concerning the use of outdoor spas.
2. The location must be close to an electrical outlet.
An extension cord cannot be used with the
spa.
3. The spa should be close to a source of water.
4. We recommend that you place the spa on a water
and stain resistant, non-slip surface.
5. Be sure that the location you choose is stable. It
must be able to support the weight of the spa
when it is filled with water, plus the weight of the
occupants. the spa weighs approximately 2,339
pounds when filled with water.
6. Think about environmental factors, such as rain,
wind, shade, sunlight, and so forth.
7. You should be able to monitor the use of the spa
from your home, to prevent unauthorized use by
children.
8. Be sure that there is room around the spa to permit servicing of the unit. The diameter of the tub is
69”. You should allow for this size, plus the size of
the spa jet unit plus room to remove the cover,
when choosing the location.
9. Be sure to note any other considerations, such as
aesthetics or privacy concerns, which may affect
the safety or enjoyment of using the spa.
Choosing a Location for the Hydrotherapy Spa
7
1. Before beginning assembly, be sure that you
have read and understand the information in the
box above and on page 6.
Place the Surround Bottom (45) and the preattached Spa Surround (9) on the ground in the
location you have chosen for assembly. Unfold the
Spa Surround until it is round.
Open the Inflatable Liner (29). Lay the floor of the
Inflatable Liner (the side with the triangular pattern)
on the bottom of the Spa Surround (9). Pull the liner
wall up, making sure that the three indicated
holes in the Inflatable Liner are centered in the
cutout in the Spa Surround.
Attach the flap on the top edge of the Inflatable Liner
(29) to the fastener strip on the edge of the Spa
Surround (9). Start the flap where the fastener strip
starts and pull the flap tight as you go around. Make
sure the three holes in the Inflatable Liner are
centered in the cutout in the Spa Surround (9),
as shown in the inset drawing.
1A
29
Before beginning assembly, carefully read the
following information and instructions:
• Place all parts in a cleared area and remove the
packing materials; do not dispose of the packing
materials until assembly is completed.
• Read all assembly steps before you begin.
• Assembly requires only the included air pump.
Note: The included flat wrench is not required for
assembly. The flat wrench is used to remove the
filter cap (see pages 10 and 11).
• Make sure that all parts are oriented as shown in
the drawings.
9
45
Holes
Cutout
Fastener
Strip
Assembly
1B
9
29
Flap
Fastener Strip
Cross
Section
View from the Outside
Cutout
Holes in Inflatable Liner
Loading...