Ilive ISB202S User Manual

International Support

To download this User’s Guide in English, Spanish, or French, or to get answers to
frequently asked questions, visit the support section at www.ilive.net.

Para descargar este Manual del Usuario en inglés, español y francés, o para obtener
respuestas a preguntas frecuentes, visite la sección de apoyo en www.ilive.net.

Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour
obtenir des réponses à des questions fréquemment posées, consultez la rubrique
d’assistance sur www.ilive.net.

Phone: [phone]
Email: [e-mail]
Parts Email: [e-mail]
Website: www.iliveelectronics.com

Green Initiative

Environmental Commitment to ‘Protect for Today and Sustain for Tomorrow’

2009 marked the ofcial launch of DPI, Inc.’s corporate campaign for a greener and cleaner world. DPI
is building upon environmental initiatives introduced at all of their facilities to help formulate and sustain
signicant and important conservation efforts within its manufacturing and marketing communities.
In addition to targeting and selecting energy efcient product features, and structuring ‘green ofce’
procedures, other initial program efforts include:

• Reduction of all packaging sizes

• Recyclable plastics for clamshell packages, with a plan to eventually replace plastic with
recyclable paper

• Recycled ber board in place of the polyfoam in packing boxes

• Recycled plastics in place of the virgin material in product construction

Warnings and Precautions

• WARNING: To prevent re or shock hazards, do not expose this unit to rain or moisture.

• WARNING: Do not place the unit on top of any soft, porous, or

sensitive surfaces to avoid damaging the surface. Use a protective
barrier between the unit and surface to protect the surface.

• WARNING : Where the mains plug or appliance coupler is used as the
disconnect device, such disconnect device shall remain readily operable.

• Note : This device uses an internal rechargeable lithium-ion battery that should
last the lifetime of the device. If you suspect your battery may be dead after
several attempts to charge, please contact 1-888-999-4215 for support.

• Never disassemble the unit or attempt to remove the battery as
that could cause leakage of an electrolytic substance.

FCCWarnings

WARNING:Changes or modications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Pairing a Bluetooth Device

1. Turn on the unit and press the Pair button. The
Pairing Indicator will ash blue quickly.

When pairing, remain within 3 feet of the unit.

2. Using the native controls on your Bluetooth device,
select the “ISB202” in your Bluetooth settings to pair.

If your device requests a password, enter the default password “ 0 0 0 0 ”. Refer to the user’s

manual for your specic device for instructions on pairing and connecting Bluetooth devices.

3. When successfully paired and connected, the Pairing Indicator
will display a solid blue light and a beep will sound from the unit.

After initial pairing, the unit will stay paired unless unpaired manually by the user or erased
due to a reset of the device.