iLive ID200B Firmware Update Instruction
Firmware Update
Important Software Updates
for 5th Generation iPod nano Users
Overview
Features of Updated Software
• Support of 5th generation iPod nano
Just as Apple continues to update and improve it’s software and hardware, iLive
works to remain up-to-date with the latest oerings from Apple.
Continue to check the iLive website (www.ilive.net) for future updates to your
ID200B.
Preparation
You will need all of the following.
• Computer connected to the Internet.
• CD drive that is capable of reading and writing CD disk
• Blank CD-R or CD-RW disc.
Checking your DVD Player’s Current Software Version
1. Power on DVD player.
2. Remove any CD or DVDs from the DISC DRAWER.
3. Press “9735” using the NUMBER KEYPAD on the remote.
4. Your DVD player’s current software version will be listed after “Software
datacode”. Write down this number for reference.
5. Go to www.ilive.net and click on the support tab. Then select ID200B from
the list of products.
6. Select DOWNLOADS, then compare your DVD player’s software datacode to
the code listed in the Firmware Update section. If your DVD player’s datacode
does not match the most recent rmware update, then your player can be
updated.
7. Press the OPEN/CLOSE button on the DVD player to exit the software menu.
Creating a Firmware Disk
1. Go to www.ilive.net and click on the support tab. Then select ID200B from
the list of products.
2. Select DOWNLOADS, then click on the most recent rmware update and save
le to your computer.
3. Load a blank CD into a CD writable drive.
4. Copy and Paste or Drag and Drop rmware le to CD drive, and write (burn)
le to CD.
Installing Updates
1. Power on DVD player.
2. Press the OPEN/CLOSE button to open the DISC DRAWER. Insert the
rmware disc. Press the OPEN/CLOSE button to close the DISC DRAWER.
The DVD player will read disk and automatically begin update process. The
update process will take several minutes.
3. The DVD player will automatically power o when the update is complete.
4. Once update is complete, power on the DVD player and remove update disk.
5. Press the SETUP button to access the system setup menu.
6. Select “Default Reset” and press the ENTER button.
7. Your DVD player is now updated.
The following events may cause the writing of the rmware update to the player to be halted and the
player to no longer operate properly.
• DO NOT unplug the power cord during the rmware update process.
• Avoid loss or interruption of power during the rmware update process.
• DO NOT press the power button on the unit during the rmware update process.
• Check the rmware update disc for dirt or scratches before beginning the rmware update
process.
WARNING: Do not adjust the region code on the DVD player. Changing the region
code can result in issues with your DVD player’s ability to read DVDs.
Customer Support: 1-314-621-2881iLive | ID200B
Loading...