Ikegami ICD-525KIT-OD, ICD-525KIT-IDA2, ICD-525KIT-IDA, ICD-525KIT-ID2, ICD-525KIT-ID User Manual
...
INSTRUCTION MANUAL
Color Camera
MODEL
ICD-525
ICD-525-TDN
e
OUTDOOR USE WARNING
WARNING – TO PREVENT FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
The apparatus shall not be exposed to
dripping or splashing and that no
objects filled with liquids, such as
vases, shall be placed on the
apparatus.
u
s
t
c
Ikegami Tsushinki Co., Ltd.
c
o
p
d
r
o
Thank you for choosing this Ikegami ICD-525 Camera.
Please read this Instruction Manual carefully to keep your Ikegami camera at
peak performance for longer service period.
This unit is a box -type 1 CCD (1/3” ) color camera which has also switchable
monochrome mode from color mode for low light condition (as night).
Contents
Page
1. Caution for Usage of Camera ..........................................................1
2. General ............................................................................................2
3. Future ...............................................................................................2
4.
Name and Function of Each Part ........................................................ 4
5. Connection .......................................................................................6
5-1. Power cable (AC24V IN/DC12V IN) ..........................................6
5-2. VIDEO OUT cable (VIDEO OUT) .............................................6
6. Operation .........................................................................................7
6-1. User Setup ................................................................................7
6-2. Names and functions of the setup buttons ...............................7
6-3. Setup mode procedures ...........................................................7
7. Focus EZ function ..........................................................................18
7-1. Screen Displays ......................................................................18
8. Warranty and after sale service .....................................................19
9. Specifi cations .................................................................................20
10. Exter nal Appearance .....................................................................22
11. Setup Flow Chart ...........................................................................23
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
CAUTION;
ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PART
RESPONSIBLE FOR COMPLIANCE COULD VOID THE USERS AUTHORITY TO
OPERATE THE EQUIPMENT.
Instructions for Disposal of Electrical and Electronic Equipment in
Private Households
Disposal of used Electric and Electronic Equipment
(Applicable in the European Union and other European countries with
separated waste disposal and collection methods)
This symbol on the product, or in the related documents in the package,
indicates that this product shall not be treated as normal household waste.
Instead, it should be taken to a proper applicable collection point or depot for
the recycling of electric and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent possible negative
consequences for the environment and human health, which could otherwise be caused
by inappropriate waste handling of this product. The recycling of materials will help to
conserve natural resources.
For more detailed information about recycling of this product, please contact your local city
authority, your household waste disposal service or the place where you purchased the
product.
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any of the ventilation openings. Install in accordance with
the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifi ers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong is provided for your safety. When the
provided plug does not fi t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11) Only use the attachments/accessories specifi ed by the manufacturer.
12) Use only with a cart, stand, tripod, bracket, or table specifi ed by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long
periods of time.
14) Refer all servicing to qualifi ed service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
15) CAUTION - These servicing instructions are for use by qualifi ed service
personnel only. To reduce the risk of electric shock, do not perform any
servicing other than that contained in the operating instructions unless
you are qualifi ed to do so.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
1. Caution for Usage of Camera
Do not expose the camera/internal mechanism in the water/rain
●
splashed and/or moisture environment.
Do not use the camera where the ambient temperature under -10
●
Celsius or over 50 Celsius. The image and component parts of camera
may be adversely affected and/or the camera may not function
correctly.
Do not remove the camera case, unless it is absolutely necessary for
●
installing and /or adjusting the camera. The precision electrical and
electronic components parts are inside the camera. The unneeded
removing case is causing fault the camera, and/or accident (e.g.
electric shock).
Power off the camera before installing and electrical connection the
●
camera.
Do not drop camera and/or give the shock on camera which are in
●
transit.
Do not touch the surface of Image Sensor with hand/fi ngers.
●
Do not aim the camera at Sun.
●
In case under high temperature condition, it may appear the FPN (Fixed
●
Pattern Noise) like rough on picture of camera. It is caused to Image
Sensor characteristic, not indicate a technical problem.
If the camera shoot the fi ne stripes object, it may appear the colored
●
Interference fringe (Moire) on picture of camera. It is not indicate a
technical problem.
1
2. General
This color camera is provided with a 1/3-inch approx. 480,000 pixels
CCD sensor and equipped with the color/black-and-white picture out put
switching. This camera produce the high quality color picture in a day light
condition, and high sensitivity picture in the night.
This CCTV camera features wide dynamic range, high sensitivity and high
resolution, and is equipped with Auto iris control function (can be selected
suited auto iris lens) and other functions. The ICD-525 is best suited for
general surveillance.
3. Future
(1) High-quality picture and high resolution
The high resolution of a horizontal resolution of 700 TV lines is assured.
The camera is designed for smear-free imaging and low noise. The
well-designed DSP, Digital Signal Processor, effectively enhances
details, which achieves crisp and sharp images with a high signal-to-
noise ratio.
(2) Day/Night change-over function
Depending on the surrounding brightness, the system automatically
switches over images from high-quality color images in the day time
to noise-reduced black and white images in the nighttime, always
providing clear images around the clock.
(3) Wide Light Dynamic Range (WDR)
The WDR function provides for very effective compensation of high light
and dark areas in screen. This situation may occur generally outside or
viewing from indoor to outdoor scenes. Even in large light fl uctuations,
bright-and-dark subjects can be captured and viewed clearly with a
natural appearance.
Automatic white balance (ATW: Automatic Tracking White Balance Control)
(4)
Thanks to the automatic follow-up white balance control (ATW), the
white balance adjusts itself no matter how great the subject's color
temperature fluctuates.
(
(5) AES
The AES function with sensitivity ratio of 1:1600 is incorporated for smooth
sensitivity control by variable step control, allowing the stable video output
equivalent to F1.5 to F50 Auto Iris to be obtained, even with a fi xed iris lens.
Automatic electronic shutter
)
2
(6) Automatic iris control
This function is available control voltage for DC type auto iris lens.
Almost all types of DC control auto iris CCTV lenses can be used.
(7) Lens fl ange back focus adjustment
An easy adjustment can be done by a rotating lens mount mechanism,
this may be useful to fi x/use auto iris zoom lenses.
(8) FOCUS EZ function
The level indicator is displayed to allow immediate judgment of focal
point. In addition, the focus of the auto-iris lens is released to allow
easy focusing without worrying about the depth of fi eld even in a bright
environment during the day light.
(9) Optimum Monitor Output Select function
The optimum picture quality can be obtained with this unique function
for CRT or LCD monitors. Sometimes, LCD, Liquid Crystal display type,
Flat Screen.
Monitor with digital process function shows different display
reproduction characteristics and you may choose this output selection
to have the best pictures on the monitor screen. The level indicator is
displayed to allow immediate judgment of focal point. In addition, the
focus of the auto-iris lens is released to allow easy focusing without
worrying about the depth of fi eld even in a bright environment during
the day light.
3
4.
Name and Function of Each Part
4
2
3
1
5
LENS
POWER
VIDEOOUT
6
9
AC24V50/60Hz230mA
〜
−＋
DC12V240mA
U
SETUP
L
R
D
7
8
10
E
4
Lens Mount (CS Mount)
①
Lens fi xing Mount for various CS Mount lens (C-mount adaptor can be
attached).
Fixing screw for Lens fl ange back focus adjustment
②
Loose the screw before fl ange back focus adjustment, and tight after
this adjustment.
Flange back focus adjustment mechanism
③
If it is unfocused picture even after adjust the focus ring of lens, fl ange
back focus adjustment shall be done (adjust the depth between lens
fi xing surface and CCD image capture face).
The screw holes for camera holder/mount
④
These screw holes are for fi xing the camera holder for wall or ceiling,
also tripod for photo camera.
The fi xing screw length for camera holder and tripod should be less
than 5.5mm as follows (1/4”-20UNC) size screw.
Video Output connector (Video out)
⑤
Video signal out connector for monitor/switcher.
Power Input connector (non polarity)
⑥
Enter the power of AC24V IN (±10%)/DC12V (DC10.5V to 15V).
Power indicator
⑦
LED: It is lit green when power on.
Auto iris lens connector (for DC control iris lens only)
⑧
This connector is used for connecting DC Iris control cable plug
(Applicable E4-191J-100 or equivalent) for DC type auto iris lens.
DC Iris System
●
— Connector cable leads —
2
4
Auto iris lens
1. Damping coil (-)
2. Damping coil (+)
3. Driving coil (+)
4. Driving coil (-)
1
3
* Connect the leads as shown above.
Please refer also to the instruction manual
3
of lens to be used.
to ⑩ Button for Set up
⑨
See page 7 “Operation”.
1
4
2
Connector pin assignment
5
Loading...