Ikea IHW53UC0FS1, IHW53UC0FS0 Owner’s Manual

30" (76.2 CM) WALL-MOUNT CANOPY
IMPORTANT: READ AND SAVE THESE INSTRUCTIONS. FOR RESIDENTIAL USE ONL IMPOR SÓLO P IMPOR POUR UTILISA
.
RANGE HOOD
Installation Instructions and Use & Care Guide
For questions about features, operation/performance, parts, accessories or service, call: 1-866-664-2449.
In Canada, for assistance, installation and service, call: 1-866-664-2449.
CAMPANA PARA COCINA CON ESCUDETE
DE MONTAJE EN PARED DE 30" (76,2 CM)
Instrucciones de instalación y Manual de uso y cuidado
llame al: 1-866-664-2449.
HOTTE DE CUISINIÈRE À MONTAGE
MURAL DE 30" (76,2 CM)
Instructions d’installation et Guide d’utilisation et d’entretien
Au Canada, pour assistance, installation ou service, composez le 1-866-664-2449
Table of Contents/Índice/Table des matières ...........................2
For warranty concerns, do not take the appliance back to the store. Please contact us in U.S.A. or Canada at 1-866-664-2449. This product features a Limited Warranty – See the “Warranty” section for complete details. IKEA® appliances carry a 5-year
warranty (excludes LAGAN family – see warranty for coverage details). NOTE: Proof of Purchase is required to obtain warranty service.
Si tiene dudas acerca de la garantía, no devuelva el aparato a la tienda. Póngase en contacto con nosotros en los EE.UU. o en Canadá al 1-866-664-2449.
Este producto tiene una garantía limitada – Consulte la sección “Garantía” para obtener todos los detalles. Los aparatos IKEA® tienen una garantía de 5 años (excluyendo los de la familia LAGAN – consulte la garantía para ver los detalles acerca de la cobertura).
NOTA: Se requiere la prueba de compra para obtener servicio bajo la garantía.
Pour toute question concernant l’application de la garantie, ne pas rapporter l’appareil au magasin. Veuillez nous contacter aux É.-U. ou au Canada au 1-866-664-2449.
Ce produit est couvert par une garantie limitée – Voir la section “Garantie” pour des détails complets. Les appareils IKEA® sont couverts par une garantie de 5 ans (hormis les appareils de la série LAGAN – voir la garantie pour des détails concernant les modalités de garantie).
REMARQUE : Une preuve d’achat est obligatoire pour obtenir l'application de la garantie.
Y.
TANTE: LEA Y GUARDE ESTAS INSTRUCCIONES.
ARA USO RESIDENCIAL.
TANT : LIRE ET CONSERVER CES INSTRUCTIONS.
TION RÉSIDENTIELLE UNIQUEMENT
LIB0115826/W10836368A
TABLE OF CONTENTS
RANGE HOOD SAFETY .................................................................3
INSTALLATION REQUIREMENTS .................................................5
Tools and Parts .............................................................................5
Location Requirements ................................................................5
Venting Requirements ..................................................................6
Electrical Requirements ...............................................................7
INSTALLATION INSTRUCTIONS ...................................................8
Prepare Location ..........................................................................8
Install Range Hood .......................................................................9
Connect Vent System ..................................................................9
Make Electrical Connection .......................................................10
Install Vent Covers ......................................................................10
Complete Installation .................................................................10
ÍNDICE
SEGURIDAD DE LA CAMPANA PARA COCINA ........................ 17
REQUISITOS DE INSTALACIÓN .................................................19
Herramientas y piezas ................................................................19
Requisitos de ubicación .............................................................19
Requisitos de ventilación ...........................................................20
Requisitos eléctricos ..................................................................22
INSTRUCCIONES DE INSTALACIÓN .........................................22
Preparación de la ubicación ......................................................22
Instalación de la campana para cocina .....................................23
Conexión del sistema de ventilación .........................................23
Conexión del suministro eléctrico ..............................................24
Instalación de las cubiertas del ducto de escape .....................25
Complete la instalación ..............................................................25
RANGE HOOD USE ......................................................................11
Range Hood Controls ................................................................11
RANGE HOOD CARE ...................................................................12
Cleaning .....................................................................................12
WIRING DIAGRAM .......................................................................13
ASSISTANCE OR SERVICE .........................................................14
In the U.S.A. ...............................................................................14
In Canada ...................................................................................14
Accessories ................................................................................14
WARRANTY ..................................................................................15
USO DE LA CAMPANA PARA COCINA ...................................... 26
Controles de la campana para cocina .......................................26
CUIDADO DE LA CAMPANA PARA COCINA ............................27
Limpieza .....................................................................................27
DIAGRAMA DE CABLEADO ........................................................28
AYUDA O SERVICIO TÉCNICO ...................................................29
En los EE.UU. .............................................................................29
Accesorios ..................................................................................29
GARANTÍA.....................................................................................29
TABLE DES MATIÈRES
SÉCURITÉ DE LA HOTTE DE CUISINIÈRE ...............................31
EXIGENCES D’INSTALLATION ...................................................33
Outils et pièces ...........................................................................33
Exigences d’emplacement .........................................................33
Exigences concernant l’évacuation ...........................................34
Spécifications électriques ..........................................................36
INSTRUCTIONS D’INSTALLATION ............................................. 36
Préparation de l’emplacement ...................................................36
Installation de la hotte ................................................................37
Raccordement du circuit d’évacuation ......................................37
Raccordement électrique ...........................................................38
Installation des cache-conduits .................................................39
Achever l’installation ..................................................................39
UTILISATION DE LA HOTTE ....................................................40
Commandes de la hotte de cuisinière .......................................40
ENTRETIEN DE LA HOTTE .........................................................41
Nettoyage ...................................................................................41
SCHÉMA DE CÂBLAGE ...............................................................42
ASSISTANCE OU SERVICE .........................................................43
Au Canada ..................................................................................43
Accessoires ................................................................................43
GARANTIE .....................................................................................43
2
RANGE HOOD SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
You can be killed or seriously injured if you don't immediately
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
State of California Proposition 65 Warnings: WARNING: This product contains one or more chemicals known to the State of California to cause cancer. WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
follow instructions.
You
can be killed or seriously injured if you don't
instructions.
follow
3
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
4
INSTALLATION REQUIREMENTS
7
"
8
"
Tools and Parts
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Tools Needed
■ Level
■ Drill with 1
drill bits
■ Pencil
■ Wire stripper or utility knife
■ Tape measure or ruler
■ Pliers
■ Caulking gun and weatherproof caulking compound
■ Vent clamps
■ Jigsaw or keyhole saw
■ Flat-blade screwdriver
■ Metal snips
■ Phillips screwdriver
Parts Needed
■ Home power supply cable
1
/2" (12.7 mm) UL listed or CSA approved strain relief
■ 3 UL listed wire connectors
For Vented Installations, You Will Also Need:
■ 1 wall or roof cap
■ Metal vent system
For Non-Vented (Recirculating) Installations, You Will Also Need:
■ Charcoal Filter Kit Part Number W10412939 for non-vented
(recirculating) installations only. See “Assistance or Service” section to order.
■ 6" (15.2 cm) diameter round metal vent duct -
length required is determined by ceiling height.
Parts Supplied
Remove parts from packages. Check that all parts are included.
■ Hood canopy assembly with blower and LED lights installed
■ Vent transition with back draft dampers installed
■ Vent cover support bracket
■ Metal grease filter(s)
■ Mounting template
■ 2-piece vent cover
■ 4 - 2.9 x 6.5 mm screws (Phillips)
■ 2 - 3.5 x 9.5 mm screws (Phillips)
■ 6 - 5 x 45 mm mounting screws (#2 Phillips)
■ 4 - 5.4 x 75 mm screws (Phillips) (for 10 x 60 mm wall
anchors)
■ 2 - 8 x 40 mm wall anchors (masonry)
■ 4 - 10 x 60 mm wall anchors
■ Air deflector (for non-vented [recirculating] installations only)
1
/4" (3 cm), 3/8" (9.5 mm), and 3/16" (4.8 mm)
Location Requirements
IMPORTANT: Observe all governing codes and ordinances. Have a qualified technician install the range hood. It is the
installer’s responsibility to comply with installation clearances specified on the model/serial/rating plate. The model/serial/ rating plate is located behind the left filter on the rear wall of the vent hood.
Canopy hood location should be away from strong draft areas, such as windows, doors and strong heating vents.
Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance.
This range hood is recommended for use with cooktops with a maximum total rating of 60,000 BTUs or less.
Grounded electrical outlet is required. See “Electrical Requirements” section.
The canopy hood is factory set for venting through the roof or wall. For non-vented (recirculating) installation, see “For non­vented (recirculating) installation only” in the “Connect Vent System” section. Charcoal Filter Kit Part Number W10412939 is available from your dealer or an authorized parts distributor.
All openings in ceiling and wall where canopy hood will be installed must be sealed.
For Mobile Home Installations
The installation of this range hood must conform to the Manufactured Home Construction Safety Standards, Title 24 CFR, Part 328 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or when such standard is not applicable, the standard for Manufactured Home Installation 1982 (Manufactured Home Sites, Communities and Setups) ANSI A225.1/NFPA 501A, or latest edition, or with local codes.
Product Dimensions
¹⁄₄
(18.4 cm)
30" (76.2 cm)
* For non-vented (recirculating) installations ** For vented installations
¹⁄₈
(20.6 cm)
*28⁷⁄₈" (73.3 cm) min. 42¹⁄₁₆" (106.8 cm) max.
**28³⁄₈" (72.0 cm) min. 38" (96.5 cm) max.
14¹⁄₈"
(35.9 cm)
(25.4 cm)
20" (50.8 cm)
10"
1¹₂" (3.8 cm)
5
Cabinet Dimensions
wer
2" (5.1 cm) min. 6" (15.2 cm) min.*
Vent and po
supply cable
entry location
15" (38.1 cm)
Side cabinet
30" (76.2 cm)
“X”
bottom of
canopy
to cooking
surface
Centerline
* For non-vented (recirculating) installations
IMPORTANT:
Minimum distance “X”: 24" (61 cm) from electric cooking surface
Minimum distance “X”: 27" (68.6 cm) from gas cooking surface
Suggested maximum distance “X”: 36" (91.4 cm)
The chimneys can be adjusted for different ceiling heights. See the following chart.
Vented Installations
Min. ceiling height Max. ceiling height
Electric cooking
7' 5" (2.26 m) 9' 2" (2.79 m)
surface Gas cooking
7' 8" (2.34 m) 9' 2" (2.79 m)
surface
Non-Vented (Recirculating) Installations
Min. ceiling height Max. ceiling height
Electric cooking
7' 5" (2.26 m) 9' 6" (2.9 m)
surface Gas cooking
7' 8" (2.34 m) 9' 6" (2.9 m)
surface
NOTE: The range hood chimneys are adjustable and designed to meet varying ceiling or soffit heights depending on the distance “X” between the bottom of the range hood and the cooking surface. For higher ceilings, a Stainless Steel Chimney Extension Kit Part Number EXTKIT18FS is available from your dealer or an authorized parts distributor. The chimney extension replaces the upper chimney shipped with the range hood.
Side cabinet
Cooking surface
Venting Requirements
(vented models only)
■ Vent system must terminate to the outdoors except
for non-vented (recirculating) installations.
■ Do not terminate the vent system in an attic or other
enclosed area.
■ Do not use 4" (10.2 cm) laundry-type wall cap.
■ Use metal vent only. Rigid metal vent is recommended.
Plastic or metal foil vent is not recommended.
■ The length of vent system and number of elbows should
be kept to a minimum to provide efficient performance.
For the Most Efficient and Quiet Operation:
■ Use no more than three 90° elbows.
■ Make sure there is a minimum of 24" (61 cm) of straight
vent between the elbows if more than 1 elbow is used.
■ Do not install 2 elbows together.
■ Use clamps to seal all joints in the vent system.
■ The vent system must have a damper. If the roof
or wall cap has a damper, do not use the damper supplied with the range hood.
■ Use caulking to seal exterior wall or roof opening
around the cap.
■ The size of the vent should be uniform.
Cold Weather Installations
An additional back draft damper should be installed to minimize backward cold air flow and a thermal break should be installed to minimize conduction of outside temperatures as part of the vent system. The damper should be on the cold air side of the thermal break.
The break should be as close as possible to where the vent system enters the heated portion of the house.
Makeup Air
Local building codes may require the use of makeup air systems when using ventilation systems greater than specified CFM of air movement. The specified CFM varies from locale to locale. Consult your HVAC professional for specific requirements in your area.
Venting Methods
This canopy hood is factory set for venting through the roof or wall.
A 6" (15.2 cm) round vent system is needed for installation (not included). The hood exhaust opening is 6" (15.2 cm) round.
NOTE: Flexible vent is not recommended. Flexible vent creates back pressure and air turbulence that greatly reduce performance.
Vent system can terminate either through the roof or wall. To vent through a wall, a 90° elbow is needed.
Rear Discharge
A 90° elbow may be installed immediately above the hood.
6
For Non-Vented (Recirculating) Installations
A
90 Elbo
Wall cap
If it is not possible to vent cooking fumes and vapors to the outside, the hood can be used in the non-vented (recirculating) version, fitting a charcoal filter and the deflector. Fumes and vapors are recycled through the top grille. See the “Assistance or Service” section for information on ordering.
Non-Vented
Roof Venting
Wall Venting
(Recirculating)
A
B
B
B
A
A. Roof cap B. 6" (15.2 cm)
round vent
A. Wall cap B. 6" (15.2 cm)
round vent
A. Deflector B. 6" (15.2 cm)
round vent
Calculating Vent System Length
To calculate the length of the system you need, add the equivalent feet (meters) for each vent piece used in the system.
Vent Piece 6" (15.2 cm) Round
45° elbow 2.5 ft (0.8 m)
Electrical Requirements
Observe all governing codes and ordinances. Ensure that the electrical installation is adequate and in
conformance with National Electrical Code, ANSI/NFPA 70 (latest edition), or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No. 0-M91 (latest edition) and all local codes and ordinances.
If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.
A copy of the above code standards can be obtained from:
National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02169-7471
CSA International
8501 East Pleasant Valley Road
Cleveland, OH 44131-5575
■ A 120 volt, 60 Hz., AC only, 15-amp, fused electrical
circuit is required.
■ If the house has aluminum wiring, follow the
procedure below:
1. Connect a section of solid copper wire to the
pigtail leads.
2. Connect the aluminum wiring to the added section
of copper wire using special connectors and/or tools designed and UL listed for joining copper to aluminum.
Follow the electrical connector manufacturer’s recommended procedure. Aluminum/copper connection must conform with local codes and industry accepted wiring practices.
■ Wire sizes and connections must conform with the rating of
the appliance as specified on the model/serial/rating plate. The model/serial/rating plate is located behind the left filter on the rear wall of the range hood.
■ Wire sizes must conform to the requirements of the National
Electrical Code, ANSI/NFPA 70 (latest edition), or CSA Standards C22. 1-94, Canadian Electrical Code, Part 1 and C22.2 No. 0-M91 (latest edition) and all local codes and ordinances.
90° elbow 5 ft (1.5 m)
Maximum equivalent vent length is 35 ft (10.7 m).
Example Vent System
w
2 ft
(0.6 m)
The following example falls within the maximum recommended vent length of 35 ft (10.7 m).
1 - 90° Elbow = 5 ft (1.5 m) 1 - Wall cap = 0 ft (0 m) 8 ft (2.4 m) straight = 8 ft (2.4 m) Length of system = 13 ft (3.9 m)
6 ft (1.8 m)
7
INSTALLATION INSTRUCTIONS
B
"
(6.4 mm)
A
Prepare Location
■ It is recommended that the vent system be installed
before hood is installed.
■ Before making cutouts, make sure there is proper
clearance within the ceiling or wall for exhaust vent.
■ Check your ceiling height and the hood height
maximum before you select your hood.
1. Disconnect power.
2. Determine which venting method to use: roof, wall,
or non-vented.
3. Select a flat surface for assembling the range hood.
Place covering over that surface.
WARNING
Excessive Weight Hazard
Use two or more people to move and install range hood.
Failure to do so can result in back or other injury.
4. Using 2 or more people, lift range hood onto
covered surface.
5. Remove wood base from range hood and dispose
of properly.
Range Hood Mounting Screws Installation
1. Determine and mark the centerline on the wall where
the canopy hood will be installed.
2. Select a mounting height between a minimum of 24" (61 cm)
for an electric cooking surface, a minimum of 27" (68.6 cm) for a gas cooking surface, and a suggested maximum of 36" (91.4 cm) above the range to the bottom of the hood. Mark a reference line on the wall.
3. Tape template in place, aligning the template centerline
and bottom of template with hood bottom line and with the centerline marked on the wall.
A
TROPPUS LLAW RAER RO SDUTS HGUORHT SELOH TOLIP "61/3 )OWT( 2 LLIRD
Vertical Centerline
LLAW RAER
ETALPMET GNITNUOM
C
L
eniL latnoziroH
A. Centerline B. Fastener locations C. Mounting height reference (hood bottom line)
thgieH noitallatsnI
EGDE MOTTOB NGILA
ENIL LICNEP HTIW
MOTTOB GNITACIDNI
DOOH EHT FO
C
5. For wood, drill 3/16" (4.8 mm) pilot holes at all locations
where screws are being installed into wood. For wall anchors, drill 7/16" (10 mm) holes at all locations
where wall anchors are being used.
6. For wood, install (2) 5 x 45 mm mounting screws. Leave
a 1/4" (6.4 mm) gap between the wall and the back of the screw head to slide range hood into place.
For wall anchors, install the 10 x 60 mm wall anchors, and install the 5.4 x 75 mm screws into the wall anchors. Tighten until the wall anchors are secure. Back the screws out 1/4" (6.4 mm).
¹⁄₄
Vent Cover Support Bracket Installation
Installations using telescoping upper and lower vent cover assembly
1. Position vent cover bracket on wall about 1/8" (3 mm)
away from the ceiling.
2. Mark the hole locations.
3. Drill (2) 3/8" (9.5 mm) holes for 8 x 40 mm wall anchors
and insert anchors flush with the wall.
C
B
D
A. 8 x 40 mm wall anchors B. Centerline on wall C. Vent cover support bracket D. 5 x 45 mm screws
4. Attach vent cover support bracket to wall.
Complete Preparation
1. Determine and make all necessary cuts in the wall for the
vent system. Install the vent system before installing the hood. See “Venting Requirements” section.
2. Determine the required height for the home power supply
cable and drill a 11/4" (3.2 cm) hole at this location.
3. Run the home power supply cable according to the National
Electrical Code or CSA Standards and local codes and ordinances. There must be enough 1/2" conduit and wires from the fused disconnect (or circuit breaker) box to make the connection in the hood’s electrical terminal box.
NOTE: Do not reconnect power until installation is complete.
4. Use caulk to seal all openings.
4. Mark centers of the fastener locations through the template
to the wall. IMPORTANT: All canopy mounting screws must be installed
into wood where possible. If there is no wood to screw into, additional wall framing supports may be required, or use the (4) 10 x 60 mm wall anchors and 5.4 x 75 mm screws.
Remove the template.
8
Install Range Hood
A
C
A
B
A
D
B
E
NOTE: Remove protective film from range hood and metal filters.
1. Using 2 or more people, hang range hood on 2 mounting
screws through the mounting slots on back of hood.
For non-vented (recirculating) installation only:
1. Assemble the air deflector with the duct cover bracket with
2 assembly screws.
B
B
A. Mounting screws B. Mounting slots C. Lower mounting screws
2. Remove the grease filter. See “Range Hood Care” section.
3. Level the range hood and tighten upper mounting screws.
4. Install (2) 5 x 45 mm lower mounting screws and tighten.
Use the optional wall anchors if needed.
Connect Vent System
1. Install transition on top of hood (if removed for shipping)
with (2) 3.5 x 9.5 mm (Phillips) sheet metal screws.
B C
A. Vent cover bracket B. 2.9 x 6.5 mm screws C. Deflector
2. Measure from the bottom of the air deflector to the bottom
of the hood outlet.
A
C
X
A. Air deflector B. Vent clamp C. X = length to cut vent duct D. Vent duct E. Exhaust outlet
3. Cut the duct to the measured size “X.”
4. Remove the air deflector.
5. Slide the duct onto the bottom of the air deflector.
A. Vent transition B. 3.5 x 9.5 mm screw
6. Place the assembled air deflector and duct over
the exhaust outlet from the hood.
7. Reassemble the air deflector to the duct cover bracket
For vented installations only:
1. Fit vent system over transition piece.
with the 2 assembly screws.
8. Seal connections with vent clamps.
2. Seal connection with clamps.
3. Check that back draft dampers work properly.
9
Loading...
+ 21 hidden pages