ikan VX9 User Manual

QUICK START GUIDE / VX9 LCD MONITOR
INTRODUCTION
Thank you for purchasing the ikan VX9 LCD Monitor. We know that you will be satisfied with our “V” series monitors. Please visit www.ikancorp.com for more information on our current and future products including our award-winning fluorescent studio lights and light accessories.
PACKAGE INCLUDES
VX9 LCD Monitor AC Power Adapter MA206 Articulating Arm DV Battery Plate (Check One)
MONITO R D I A G R A M S
Front view
BP2-S Sony "L" Series BP2-SU Sony "BP-U" Series BP2-C Canon "900" Series BP2-P Panasonic "D54" Series
Checked by
VX9
VIDEO
F1
YPbPr
Y/C
F2
8
Power Switch
1
ON OFF
1
SDI HDMI
2 3 4 5 6 7
Power ON / OFF
Power Indicator Light
2
When the power is ON, the LED green lights up.
SDI Selection Switch
3
Serial digital interface input (HD/SD compatible)
4
VIDEO Selection Switch
Video input
5
HDMI Selection Switch
High-Definition Multimedia Interface input
Y/C Selection Switch
6
SVHS input
7
YPbPr Selection Switch
Analog component or RGB input
ASPECT/
MENU
EXIT
BRIGHT/
R
CONTRAST/
G
CHROMA/
B
9 10 11 12 13 14
F1 and F2 Buttons
8
Function key actions are selected in the menu.
ASPECT/EXIT Selection Button
9
Aspect: 16:9, 4:3, Full In MENU, it is to exit the menu.
MENU Knob
10
It is to display menu, select settings, and adjustments.
(Push the knob to select, turn the knob to adjust settings.)
11
BRIGHT/R Knob
1: Adjust brightness 0 - 60 (30) 2: Adjust red channel
12
CONTRAST/G Knob
1: Adjust contrast 0 - 60 (30) 2: Adjust green channel
CHROMA/B Knob
13
1: Adjust chroma 0 - 60 (30) 2: Adjust blue channe
14
TINT/SHARPNESS Knob
1: Adjust tint 0 - 60 (30) 2: Adjust sharpness 0 - 60 (30)
TINT/
SHARPNESS
User programmable function buttons. For quick access, the user may program the F1 and F2 buttons to enable frequently accessed monitor features. Via the main monitor configuration menu, either button may be assigned to perform the following functions: Window 1, Window 2, HV delay, Blue Gun, and Pixel to Pixel, .
3903 Stoney Brook Dr. Houston TX 77063. 1-713-272-8822. support@ikancorp.com © 2010 ikan Corporation. All right reserved. www.ikancorp.com
QUICK START GUIDE / VX9 LCD MONITOR
MONITO R D I A G R A M S
Rear view
1
2
3
4
5
HDMI terminal
1
HDMI input only
OUT
HDMI
VIDEO
Y/C
Y
Pb
Pr
SDI
720p
1080p
CAUTION: TURN OFF POWER
25p
3
24p
4
24psf
5
ON
OFF
1 2 3 4 5
BEFORE ADJUSTING
SWITCHES
11
6
DC 12V
+
On
Switch
50p
1
30p
2
7
IN
+
DC 12V - 20V
+ +
9101112
7
8
DC 12V-20V power terminal
XLR DC Connection
VIDEO terminal (BNC)
2
IN : Composite signal input terminal OUT: : Input signal through-out terminal
Y/C terminal
3
IN : SVHS signal input terminal OUT: : Input signal through-out terminal
4
YPbPr terminal (BNC)
IN : Component signal input terminal
Vesa 100mm Mount Holes
8
Threaded for
M4x.07 screws. Use to attach pro battery
plate adapter or for mounting third party vesa mounts.
9
DIP Switch
Enable special 720p modes. For the monitor to correctly display certain 720p signals, it is necessary to configure the DIP switches.
10
USB terminal
For factory service use only
OUT: : Input signal through-out terminal
5
SDI (HD/SD) terminal (BNC)
IN : SDI input terminal - 1.5G
11
¼-20 Threaded insert (on four sides of monitor)
Mounting Monitor
OUT: : Input signal through-out terminal (Reclock)
DC 12V power terminal
6
Standard DC Connection
**NOTE – The user must turn the monitor off before making changes to the DIP switches. Failure to do so may damage the monitor or make the monitor unusable.
12
DV Battery Plate Slot
Mounting ikan DV battery plate
DIGITAL TO ANALOG CONVERSION [SDI > YUV]
The monitor can convert digital SDI signals to Analog YUV. A signal from the SDI will be displayed on the YPbPr analog outputs. This is a straight digital to analog conversion only. There is no up converting, down converting or standards conversion available in this feature. This feature works in one direction SDI to analog. It will not work in reverse.
POWERING THE MONITOR
1. Plug the AC power adapter into the power input jack (See rear view diagram or above).
6 7
2. Attach the DV battery plate on the slot, and connect DV battery to the plate.
3. Connect a pro battery using the optional pro battery plate and then plugging that plate with the power tap cable into the DC-In connector. The pro battery plate kits (PBK17-S or PBK17-A) allow you to go into the field using standard V-Mount or Gold-Mount batteries.
3903 Stoney Brook Dr. Houston TX 77063. 1-713-272-8822. support@ikancorp.com © 2010 ikan Corporation. All right reserved. www.ikancorp.com
Loading...
+ 1 hidden pages