ikan V8000T Quick Start

Quick Start Guide ikanV8000/t

+

-

POW

PC/AV

MENU

IntroductIon

Thank You for purchasing our ikan V8000 LCD monitor. We know you will be satisfied with our

“V” series monitors. Please visit www.ikancorp for more information on our future products including
our award winning fluorescent studio lights and light accessories.

GettInG Started

1. Getting power to the monitor.
a. Plug the AC adapter into the power input jack on the bottom right corner on the monitor
or through the break out cable.

2. Connecting the A/V (audio/Video)
a. Plugging up the breakout cable to the bottom of the monitor gives you many modes for video input.
(You can switch from these modes by pressing the “PC/AV” button on the monitor)

Video Modes Description

Video-1 The yellow AV cable is your Video-1

Video-2 The red AV cable is your Video-2

S-Video This enables you to use an S-Video cable

VGA-Mode Using the VGA cable enables you to use you computer as a video source.

Menu Access to all the monitor settings “horizontal shift, color, etc.”

> When left pressed for a few seconds flips the image vertical. Toggles through menu.

< When left pressed for a few seconds flips the image horizontal. Toggles through menu.

+ Increases the volume of the monitor.

_

Power Powers up the monitor.

PC/AV Toggles through the different video modes.

Decreases the volume of the monitor.

For the touchScreen Model V8000t

1.When you purchase The ikan V8000T you will receive a CD-ROM with drivers to different

operating systems.

2.When you view the contents on the CD-ROM, you will see a folder titled “GL-619-EN”. After, you open that folder
you will see a list of folders with the appropriate operating systems that you need.

3.Once, you have open the folder with your operating system double click on the setup file. This will
take you through the installation.

4.Follow the installation directions. If you need additional help installing drivers there is a folder
in the CD-ROM titled “Manuals”. After, you have opened the “Manual” folder double click on the appropriate
Operating system manual file. If you need additional help please call us at 1-713-272-8822.

5. Plug up the black VGA cable to you computer and plug the USB plug to you computer also.

6. Once all is plugged in open TouchKit software. Now, you can customize the touchscreen to your monitor.

V8000/T Includes:

- A/V cable

- Remote Control

- VGA Cable

- AC Adapter

- Mounting Rod

- Monitor Bracket

3903 Stoney Brook Dr.

Houston TX, 77027

1-713-272-8822

www.ikancorp.com

[e-mail]