ikan RM3-43 User Manual

GETTING STARTED
1. After assembling the AC power supply by plugging in the power cord carefully screw the threaded power supply plug into the threaded input on the back of the RM3-43. The RM3-43 is powered up by switching on the power switch located on the front of the unit. When on, the red light located on the front upper right of the RM3-43 indicates the unit has AC power connected but is not switched on. When the RM3-43 is switched on the red light is off.
2. Plug the AC power adaptor into a convenient AC power receptacle. The included power supply is switchable and functions with any input between 100V to 240V so with the appropriate adaptor will work in most countries (Check your countries voltage requirements to make certain they match the included AC adaptor).
3. Plug your video source via a composite male BNC plug into the BNC female ‘Input’ of one or more of the three RM3-43 onboard monitors. The RM3-43 has full loop-thru via the ‘Output’ so the signal can be passed on to another monitor, a video mixer, or a recording deck if desired.
RM3-43
Three 4.3" Rack Mount Unit QUICKSTART GUIDE
4. To activate the LED tally, connecting the corresponding pin to ground via the HD-15 connector.
5. When the RM3-43 is rackmounted the unit can be tilted for a more comfortable viewing angle.
CONDITIONS OF WARRANTY SERVICE
• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
• The components and maintenance service fee will be charged if the warranty period has expired.
Free Service will not be Provided in the Following Situations: (* Even if the product is still within the warranty period.)
• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
3903 Stoney Brook Dr. Houston TX 77063. 1-713-272-8822, support@ikancorp.com © 2010 ikan Corporation. All right reserved. www.ikancorp.com
What’s included
� RM3-43 Rack Mount Unit � AC Power Adapter
Checked by
www.ikancorp.com 713-272-8822
RM3-43
Three 4.3” Rack Mount Unit QUICKSTART GUIDE
RM3-43
POWE R
Y
R
G
4
3
1
2
9
8
2
7
14
13
3
12
IN
GND 5 10 15
IN
IN
MENU > ASPECT
<
Power Sw itch
1
Power ON / OFF
Power Indicator Light
2
When the power is ON,
MENU > ASPECT
<
5
6
MENU > ASPECT
<
234567
MENU Selection Button
Access to all monitor settings
< Selection Button
djust the value of setting function
A
1
the LED lights up.
3
ASPECT/EXIT Selection Button
Tally Indicator Light
7
When the camera is ON, the LED lights up.
Aspect: 16:9, 4:3, Full
> Selection Button
4
djust the value of setting function
A
• For LCD panel adjustment sequentially press the MENU button until you locate the
desired parameter: Brightness, Contrast, Hue, Saturation, Menu Language, or Exit. Adjust the specific parameters by using the < and > buttons. To exit the menu, cycle thru until you see ‘Exit Menu’ and press, or simply wait and the menu will automatically time out.
• Using the aspect ratio select button on the front of the RM3-43 unit, choose the appropriate
aspect ratio depending on the source (4:3 or 16:9).
OUT
1
AC Power Connector
1
2 3 4 5
100V - 240V
VIDEO terminal (BNC)
2
IN: Composite signal input terminal
3
VIDEO terminal (BNC)
OUT: Composite signal output terminal
4
Tally port
HD-15 connection
TALLY
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
OUT
OUT
www.ikancorp.com 713-272-8822
Loading...