ikan IDMX1500 User Manual
IDMX1500-v2
1500 LED Studio Light w/ Digital DMX Control
QUICK START GUIDE
What’s Included
1 x IDMX1500-v2 LED Light
1 x AC Adapter
1 x Safety Chain
1 x Power Cord
CHECKED BY
www.ikancorp.com
support@ikancorp.com © 2015 ikan Corporation. All rights Reserved
713.272.8822
713.272.8822
IDMX1500-v2
Dip
Temperature
Getting Started
1. Power on the light using the Main Power switch
2. Control the amount of light with the Dimmer Knob clock-wise until you hear a “click”.
3. Turn the light off by twisting the Dimmer Knob counter clock-wise unit you hear a “click”.
4. The IDMX1500-v2 can also be powered by the included AC adapter.
Adjusting the Brightness
The Dimmer Knob on the back of the light allows you to adjust the intensity of the light.
Adjust the intensity of the light by turning the Dimmer Knob clock-wise to increase the
intensity and counter clock-wise to reduce it.
BACK
Attention:
If not using DMX, make sure that
DIP Switch #11 is in the ON position.
Locking Ears for
Safety Chain
Local Control
Switch 11
Dmx 512
In/Out
Switches
DMX
4-Pin
Power Plug
ikancorp.com
AC Power supply
Power On
Knob
Dimmer
Knob
www.ikancorp.com
Loading...