ikan CB8-3PT-KIT Data Sheet

CB8

Canvas Bi-Color 2800K-6500K Bendable LED Panel

Quick Start Guide

What’s Included

1 x CB8 Bi-color LED Panel Light

1 x 5/8” Baby Pin with 90 degree Mount Holes

1 x Controller box

1 x Egg Crate

1 x Hanging Strap

1 x Power Cord

1 x Power Supply

1 x Soft Box

1 x X-Holder with Ball Mount

www.ikancorp.com | 1.713.272.8822 | [e-mail] because we’re filmmakers too

Getting Started

Thank you for buying the CB8 Canvas Bendable Panel Light from Ikan. Please carefully read the instructions and guide before operating the products. The
guide includes product usage and maintenance. When you operate the product, please make sure that you have read the instructions carefully. All the
content of the manual is based on up-to-date information; technical data subject to change without notice.

Safety Instructions

1. Connect the AC power cable to the controller box before plugging into the power source. You risk electrocution by not following this instruction.

2. Don’t drag cables with excessive force. Any repairs on the products should be performed by Ikan technicians. Users should not remove the power
supply, or substitute a different power supply. This might damage the unit and will not be covered under warranty.

3. Be sure that the power is off before connecting and changing the fixture head or disconnecting your cable from the power source. We recommend using
Ikan connecting cables and connectors to avoid electrical shock.

4. The voltage shouldn’t exceed the value in the technical specifications. If the voltage is greater than, or less than the regulated values, it could damage
the product.

Overview

The care and cleaning of the Canvas Bendable LED light. The CB8 should be rolled up and placed back into the carrying bag when not in use. The LEDs
should be facing out when placed into the carrying bag. The two ends of the Canvas light should meet.

If the LED’s should get dirty or covered in dust the unit can be cleaned with mild soap and water on a damp cloth.

DO NOT SUBMERGE THE UNIT IN WATER

Connecting the 4 prong cable between the controller box and the panel light.

Align the male and female plugs so they line up and screw together until the cable is tight.

www.ikancorp.com | 1.713.272.8822 | [e-mail] because we’re filmmakers too

Installation of the X-Holder with ball mount

The X-holder should be loose before inserting the struts into the hook & loop corners.

1. Place the struts into the hook & loop flaps at the corners of the panel.

2. Place them in opposite of each other for them to stay in place.

3. Tighten the tension knob at the center to keep the struts locked in place.

Note: To avoid damage to the LED’s, place the panel light LED side down on soft material.

When placing the light mount on the 5/8” baby pin, this allows you to adjust the light in any desirable position.

Color temperatures for today’s film and TV production are 5600K (daylight) and 3200K (tungsten). Ikan developed the CB8 Bendable Light to handle both
these temperatures. With patented technologies, the CB8 offers a professional and customizable LED light source. In addition, the light features cooling
flex system for optimizing heat dissipation. Specifically, the CB8 offers the following features:

1. The 0-100% brightness incremental adjustment of the 2800K-6500K temperature enable fine-tuning your color range.

2. A panel of 336 Bi-color led light gives out 200FC of light.

3. Ultra-low noise and active cooling technology contribute to excellent thermal stability.

4. The bright LCD readout is easy to view, enabling smooth adjustment of functions.

5. Digitally adjustable knob allows you to adjust menu settings quickly and accurately.

6. AC/DC power control box allows the light to be powered by battery or DC power supply.

7. The softbox with grid cloth and 60 degree egg crate is included with the light.

www.ikancorp.com | 1.713.272.8822 | [e-mail] because we’re filmmakers too