ikan BMC-PBK-QS User Manual
BMC-PBK-QS
Blackmagic Quick Snap Power Solution QUICKSTART GUIDE
What’s included
1 x ELE-DBLPT
2 x ELE-15QRRA
1 x Pro Battery Mount Plate
1 x Power Tap Cable with Coaxial Adaptor
www.ikancorp.com
V-Mount
AB-Mount
Checked by
1.713.272.8822
support@ikancorp.com
© 2013 ikan Corporation. All right reserved
BMC-PBK-QS
Blackmagic Quick Snap Power Solution QUICKSTART GUIDE
ikan’s Quick Snap Pro Battery Rail Kit, designed for BlackMagic Cinema Camera, is fast, easy and simply to
use. Attach your Pro battery (Anton Bauer or V-Mount) to the battery plate and make sure it is secure.
AB Mount Professional Battery
+
+
Pro Battery Rail Kit
Loosen the thumbscrew to the Quick Rod Release Clamp and attach it on to your 15mm rail system for your
BlackMagic Cinema Camera and then tighten the thumbscrew. You can either mount that battery kit facing over
or under the 15mm rails. To detach the quick snap battery kit, loosen the thumbscrews enough for the grips to
clear the 15mm rails and gently pull up.
Thumbscrew
Quick Rod Release Clamp
www.ikancorp.com 713-272-8822
Loading...