IIYAMA E2271HDS-B User Manual

Page 1

USER MANUAL

ENGLISH

Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.

Page 2

ENGLISH

Page 3

CE MARKING DECLARATION OF CONFORMITY

This LCD monitor complies with the requirements of the EC Directive 2004/108/EC “EMC Directive” , 2006/95/EC “Low Voltage Directive” and 2009/125/EC “ErP Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in

residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterised by their connection to the public low voltage power supply system.

IIYAMA CORPORATION: Breguetlaan 8, 1438BC Oude Meer The Netherlands

ENGLISH

We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle information is obtained via the Internet, using the address: http://www.iiyama.com You can access the Web page of different countries from there.

We reserve the right to change speciﬁ cations without notice.



All trademarks used in this user manual are the property of their respective owners.



As an ENERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines for energy



efﬁ ciency.

Page 4

TABLE OF CONTENTS

FOR YOUR SAFETY .............................................................................................. 1

SAFETY PRECAUTIONS ................................................................................ 1

SPECIAL NOTES ON LCD MONITORS .......................................................... 3

CUSTOMER SERVICE .................................................................................... 3

CLEANING ....................................................................................................... 3

ENGLISH

BEFORE YOU OPERATE THE MONITOR ............................................................ 4

FEATURES ...................................................................................................... 4

CHECKING THE CONTENTS OF THE PACKAGE ......................................... 4

FITTING AND REMOVAL OF BASE .................................................................. 5

CONTROLS AND CONNECTORS ................................................................. 6

CONNECTING YOUR MONITOR .................................................................... 7

COMPUTER SETTING .................................................................................... 8

ADJUSTING THE VIEWING ANGLE ............................................................... 8

OPERATING THE MONITOR ................................................................................. 9

ADJUSTMENT MENU CONTENTS ................................................................ 10

SCREEN ADJUSTMENTS ............................................................................... 16

POWER MANAGEMENT FEATURE ............................................................... 19

TROUBLE SHOOTING .......................................................................................... 20

RECYCLING INFORMATION ................................................................................. 21

APPENDIX ............................................................................................................ 22

SPECIFICATIONS : ProLite E2271HDS ......................................................... 22

SPECIFICATIONS : ProLite E2271HDSD ...................................................... 23

DIMENSIONS .................................................................................................. 24

COMPLIANT TIMING ....................................................................................... 24

Page 5

FOR YOUR SAFETY

SAFETY PRECAUTIONS

WARNING

STOP OPERATING THE MONITOR IF YOU ARE AWARE OF ANY PROBLEMS

If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause ﬁ re or electric shock.

NEVER REMOVE THE CABINET

High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of ﬁ re or electric shock.

DO NOT PUT ANY OBJECT INTO THE MONITOR

Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any object inside may cause ﬁ re, electric shock or damage.

ENGLISH

INSTALL THE MONITOR ON A FLAT, STABLE SURFACE

The monitor may cause an injury if it falls or is dropped.

DO NOT USE THE MONITOR NEAR WATER

Do not use where water may be splashed or spilt onto the monitor as it may cause ﬁ re or electric shock.

OPERATE UNDER THE SPECIFIED POWER SUPPLY

Be sure to operate the monitor only with the speciﬁ ed power supply. Use of an incorrect voltage will cause malfunction and may cause ﬁ re or electric shock.

CORRECT USE OF THE AC ADAPTER

Use only the AC Adapter provided by iiyama. Any deviation from this by using another type of adapter may result in damage to the accessory and the monitor by ﬁ re or electric shock.

DO NOT DISASSEMBLE THE AC ADAPTER

Disassembling the AC Adapter may expose you to the danger of ﬁ re or electric shock.

PROTECT THE CABLES

Do not pull or bend the AC adapter, the power cable and signal cable. Do not place the monitor or any other heavy objects on the cables. If damaged, the cables may cause ﬁ re or electric shock.

ADVERSE WEATHER CONDITIONS

It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in power may cause malfunction. It is also advised not to touch the plug in these circumstances as it may cause electric shock.

FOR YOUR SAFETY 1

Page 6

CAUTION

INSTALLATION LOCATION

Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause ﬁ re, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor.

DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION

The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may not pull the cables and possibly cause injury.

MAINTAIN GOOD VENTILATION

Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause ﬁ re.

ENGLISH

To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls. Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet will be blocked and the monitor may overheat if the stand is removed. This may cause ﬁ re or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft material may also cause damage.

DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR

When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable is disconnected. If you do not disconnect them, it may cause ﬁ re or electric shock.

UNPLUG THE MONITOR

If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.

HOLD THE PLUG WHEN DISCONNECTING

To disconnect the AC adapter, the power cable or signal cable, always pull it by the plug. Never pull on the cable itself as this may cause ﬁ re or electric shock.

DO NOT TOUCH THE PLUG WITH WET HANDS

Pulling or inserting the plug with wet hands may cause electric shock.

WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER

Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage your computer.

OTHERS

ERGONOMIC RECOMMENDATIONS

To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is recommended as looking at the screen continuously can cause eye strain.

2 FOR YOUR SAFETY

Page 7

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitors and do not indicate a problem.

When you ﬁ rst turn on the LCD monitor, the picture may not ﬁ t in the display area

NOTE



because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may ﬂ icker during initial use. Turn off



the Power Switch and then turn it on again to make sure the ﬂ icker disappears. You may ﬁ nd slightly uneven brightness on the screen depending on the desktop



pattern you use. Due to the nature of the LCD screen, an afterimage of the previous screen may



remain after switching the image, when the same image is displayed for hours. In this case, the screen can be recovered slowly by changing the image or turning off the Power Switch for some hours. Contact your dealer or iiyama service center for the backlight replacement when the



screen is dark, ﬂ ickering or not lighting up. Never attempt to replace it by yourself.

CUSTOMER SERVICE

ENGLISH

NOTE

CLEANING

WARNING

CAUTION

NOTE

If you have to return your unit for service and the original packaging has been



discarded, please contact your dealer or iiyama service center for advice or replacement packaging.

If you drop any materials or liquids such as water into the monitor when cleaning,



unplug the power cable immediately and contact your dealer or iiyama service center.

For safety reasons, turn off the power switch and unplug the monitor before you clean



it.

To protect the LCD panel, do not scratch or rub the screen with a hard object.



Never use any of the following strong solvents. These will damage the cabinet and the



LCD screen.

Thinner Benzine Abrasive cleaner

Touching the cabinet with any product made from rubber or plastic for a long time may



cause degeneration or loss of paint on the cabinet.

Spray-type cleaner Wax Acid or Alkaline solvent

CABINET

LCD

SCREEN

Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then wipe the cabinet with a soft dry cloth.

Periodic cleaning with a soft dry cloth is recommended. Don't use tissue paper etc. because these will damage the LCD screen.

FOR YOUR SAFETY 3

Page 8

BEFORE YOU OPERATE THE MONITOR

FEATURES

Supports Resolutions up to 1920 × 1080



High Contrast 1000:1 (Typical), ACR Function Available / Brightness 250cd/m



(Typical), Quick Response Time 5ms (Black, White, Black)

Digital Character Smoothing



Automatic Set-up



Stereo Speakers



2 × 1W Stereo Speakers

ENGLISH

Plug & Play VESA DDC2B Compliant



Windows

Power Management (ENERGY STAR



Keyhole for Security Lock



95/98/2000/Me/XP/Vista/7 Compliant

VESA DPMS Compliant)

CHEKING THE CONTENTS OF THE PACKAGE

The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama ofﬁ ce.

AC Adapter*



DVI-D Signal Cable



Stand-Base (Screw for stand ﬁ xing attached)



Quick Start Guide



CAUTION

* a power supply higher than this rating, then a power cable with a rating of 10A/ 250V must be used.However, all guarantees and warranties are void for any problems or damage caused by a power cable not supplied by iiyama.

1. The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using

2. Applicable AC Adapter

AC Adapter Type name : ADPC1245 (TPV ELECTRONICS)

Power Cable*



Audio Cable



D-Sub Signal Cable Cable Holder



Safety Guide

4 BEFORE YOU OPERATE THE MONITOR

Page 9

FITTING AND REMOVAL OF BASE

4.00

Put the monitor on a stable surface. The monitor may cause injury or damage if it

CAUTION

Put a piece of soft cloth on the table beforehand

to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down. Install the Stand-Base to the Monitor.

Fix the Monitor to the Stand by the

screw ﬁ rmly and the push-down knob.



falls or is dropped. Do not give a strong impact to the monitor. It may cause damage.



Unplug the monitor before removal or installation to avoid electric shock or damage.



attached

ENGLISH

Stand-Base

Put a piece of soft cloth on the table beforehand

to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down. Pull the knob upwards, then remove the screw.

Press and hold the hooks inside, and pull the

Stand-Base.

Screw for Stand-Base ﬁ xing

Stand-Base

Hooks

Stand-Base

BEFORE YOU OPERATE THE MONITOR 5

Page 10

CONTROLS AND CONNECTORS

ENGLISH

<Front>

Power Indicator

NOTE

Blue: Normal operation Orange: Power Management

management mode which reduces the power consumption to less than

1W when receiving no horizontal

and/or vertical sync signal. Power Switch ( )

Menu / Select Button (MENU)

+ / Volume Button ( + )

- / ECO Button ( - )

Auto / Input Select Button (AUTO)

The monitor enters into power

[ Cable Holder ]

<Back>

Speakers

Connector for AC Adapter (DC IN)

Audio Connector ( )

D-SUB mini 15pin Connector (D-SUB)

DVI-D 24pin Connector (DVI)

HDMI Connector (HDMI)*

Cable Holder

Keyhole for Security Lock

NOTE

You can fasten a security lock and cable

to prevent the monitor from being removed without your permission.

* Available for ProLite E2271HDS only.

Fitting

●

Insert the Cable-Holder into Hole and rotate clockwise until it stops.

Removal

●

Rotate the Cable-Holder anti-clockwise and remove.

[ Collect Cables ]

Put the cables through the cable holder.

Collect cables at the back of the stand.

6 BEFORE YOU OPERATE THE MONITOR

Installation hole

Cable Holder

Page 11

CONNECTING YOUR MONITOR

Ensure that both the computer and the monitor are switched off.

Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the AC Adapter to the monitor and the Power Cable to the AC Adapter ﬁ rst and then

connect to the power supply.

Turn on your monitor and computer.

NOTE  The signal cables used for connecting the computer and monitor may vary with the type of

computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector. If a special cable is required please contact your local iiyama dealer or regional iiyama ofﬁ ce.

ENGLISH

AV Equipment

For connection to Macintosh computers, contact your local iiyama dealer or regional iiyama



ofﬁ ce for a suitable adaptor.

Make sure you tighten the ﬁ nger screws at each end of the signal cable.



[Example of Connection]

<Back>

AC Adapter (Accessory)

HDMI Cable (Not included)*

Power Cable (Accessory)

DVI-D Signal Cable (Accessory)

D-Sub Signal Cable (Accessory)

Audio Cable (Accessory)

Computer

* Available for ProLite E2271HDS only.

BEFORE YOU OPERATE THE MONITOR 7

Page 12

COMPUTER SETTING

Signal Timing



Change to the desired signal timing listed on page 24: COMPLIANT TIMING.

Windows 95/98/2000/Me/XP/Vista/7 Plug & Play



The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on

Windows 95/98/2000/Me/XP/Vista/7 by connecting the monitor to DDC2B compliant computer with the Signal Cable supplied.

For installation on Windows 95/98/2000/Me/XP: The monitor Information File for iiyama monitors

may be necessary for your computer and obtained via the Internet, using the address:

http://www.iiyama.com

NOTE

ENGLISH

For additional information on how to download the driver for your touch screen monitor,



please access the internet site noted above.

Monitor Drivers are not required in most cases for Macintosh or Unix operating systems.



For further information, please contact your computer dealer ﬁ rst for advice.

ADJUSTING THE VIEWING ANGLE

For optimal viewing it is recommended to look at the full



face of the monitor.

Hold the stand so that the monitor does not topple when



you change the monitor’s angle.

You are able to adjust the monitor’s angle up to 12



degrees upward, 3 degrees downward.

In order to ensure a healthy and relaxed body position



when using the monitor at visual display workstations, it is recommended that the adjusted tilt angle should not exceed 10 degrees. Adjust the monitor’s angle to your own preference.

NOTE  Do not touch the LCD screen when you change

the angle. It may cause damage or break the LCD screen.

Careful attention is required not to catch your



ﬁ ngers or hands when you change the angle.

8 BEFORE YOU OPERATE THE MONITOR

Page 13

OPERATING THE MONITOR

To create the best picture, your iiyama LCD monitor has been preset at the factory

with the COMPLIANT TIMING shown on page 24. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 16 for SCREEN ADJUSTMENTS.

Press the MENU Button to start the On Screen Display feature. There are additional



Menu items which can be switched by using the + / - Buttons.

Luminance

Contrast

Brightness

Eco

Picture Mode

ACR

Select the Menu item which contains the adjustment icon relating to the adjustment

Off

Standard

you want to make. Press the MENU Button. Then, use the + / - Buttons to highlight the desired adjustment icon.

Press the MENU Button again. Use the + / - Buttons to make the appropriate

adjustment or setting.

ENGLISH

Press the AUTO Button to leave the menu, and the settings you just made would

be automatically saved.

For example, to correct for vertical position, select Menu item of Image Setup and then press the MENU Button. Then, select V.Position by using the + / - Buttons. An adjustment page appears after you press the MENU Button. Then, use the + / - Buttons to

change the vertical position settings. The vertical position of the overall display should be changing accordingly while you are doing this. Press the AUTO Button lastly, it ends, any changes are saved in the memory.

Image Setup

Clock

Phase

H.Position

V.Position

Aspect

Full

NOTE

When button operations are aborted during adjustment, On-Screen Display disappears when the



time set for the Timeout has passed. Also, the AUTO button can be used to return previous menu and turn off the On-Screen Display.

Any changes are automatically saved in the memory when the On Screen Display



disappears.

Turning off the power should be avoided while using the Menu.

Adjustments for H. / V. Position, Clock and Phase are saved for each signal timing. Except for these



adjustments, all other adjustments have only one setting which applies to all signal timings.

OPERATING THE MONITOR 9

Page 14

ADJUSTMENT MENU CONTENTS

ENGLISH

Contrast

Brightness *

Eco

Picture Mode

ACR

Luminance

Contrast

Brightness

Eco

Picture Mode

ACR

Luminance

Off

Standard

Adjustment Item Problem / Option Button to Press

Too dull Too intense

Too dark Too bright

Off Normal

Direct

Mode1 Brightness of back-light is reduced. Mode2 Mode3 Standard

Brightness of back-light is reduced more than Mode1. Brightness of back-light is reduced more than Mode2. For general windows environment and monitor

default setting.

Text

For text editing and viewing in a word processing

environment. Internet Game

Movie Sport

Off

For internet environment.

For PC game environment.

For movie and video environment.

For sport environment.

Increased Contrast Ratio

Typical Contrast Ratio

NOTE

ACR adjusts brightness according to the image, and improve the contrast ratio during move playing. Contrast, Brightness, sRGB, Eco and Picture Mode cannot be adjusted and selected while ACR is active.

Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.

Direct

You can skip the Menu items and display an adjustment scale directly by using the following button operations.

ECO: Press the - Button when the Menu is not displayed.



10 OPERATING THE MONITOR

Page 15

Image Setup

Clock

Image Setup

Adjustment Item Problem / Option Button to Press

Clock*

Phase*

1,2

H. Position*

V. Position*

Phase

H.Position

V.Position

Aspect

Full

Too narrow Too wide

ENGLISH

To correct ﬂ ickering text or lines

Too left Too right

Too low Too high

Full

Aspect

*1 See page 16 for SCREEN ADJUSTMENTS.

Only Analog Input.

Expansion display

Expansion display of Aspect

OPERATING THE MONITOR 11

Page 16

Color Temp.

Gamma

Color Temp.

Mode1

Gamma

ENGLISH

Color Temp.

NOTE

Color Temp.

User-R

User-G

User-B

Warm

Adjustment Item Problem / Option Button to Press

NormalMode1

Mode2

Mode3 Warm Normal Cool

User

sRGB

sRGB is an international standard which defines and unifies the difference of color



Dark High contrast Greenish white

Yellowish white Bluish white User-R

User-G User-B

sRGB

Too weak Too strong

appearance between equipment.

You can not adjust the Brightness, Contrast, Gamma and Eco during sRGB mode



because those settings are locked.

12 OPERATING THE MONITOR

Page 17

OSD Setup

H.Position

OSD Setup

Adjustment Item Problem / Option Button to Press

H.Position

V.Position

Timeout

Language

V.Position

Timeout

Language

English

OSD is too left OSD is too right

OSD is too low OSD is too high

You can set the OSD display duration time between 5 and 60 seconds.

English Deutsch

English German

Portuguese

Français French Español Spanish Italiano Italian

Portuguese Simpliﬁ ed Chinese Russian Japanese

ENGLISH

OPERATING THE MONITOR 1

Page 18

Others

Reset Signal Select

HDMI audio

Information

Input : D-SUB Resolution : 1920(H)㧖1080(V) H.Frequency : 68KHz V.Frequency : 60Hz

Others

Yes Auto

LINE IN

Adjustment Item Problem / Option Button to Press

Reset

ENGLISH

Signal Select

NOTE

At selected the AUTO, it will automatically be selected when just one source is available. If there are more input sources available and you select one of them, the AUTO option is

not available.

HDMI audio*

1,2

Information

*1 Available for ProLite E2271HDS only.

Suitable for HDMI input only.

Direct

Yes

Factory-preset data is restored.

Return to Menu.

Auto Select the signal input automatically. D-SUB DVI

HDMI

LINE IN

Select the Analog input. Select the Digital (DVI) input.

Select the Digital (HDMI) input. HDMI*

Select the HDMI input.

Select the LINE IN input.

Displays information regarding the current input signal coming from the graphic card in your computer.

NOTE

See your graphic card user guide for more information about changing the resolution and refresh.

Direct

You can skip the Menu items and display an adjustment scale directly by using the following button operations.

Signal Select: Press the AUTO button when the Menu is not displayed, it shows following Menu.



You can then select input source via +/- button and press MENU button.

D-SUB

DVI

HDMI

14 OPERATING THE MONITOR

Page 19

Direct

You can skip the Menu items and display an adjustment scale directly by using the following button operations.

Volume: Press the + Button when the Menu is not displayed.



Adjustment Item Problem / Option Button to Press

Volume

Mute: Pressing and holding the + Button for 1-2 seconds will enable/disable the mute function when



the Menu is not displayed.

Auto Adjust: Press and hold the Auto Button for 1-2 seconds when the Menu is not displayed.



Only Analog Input

Adjustment Item Problem / Option Button to Press

Auto Adjust *

* For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 16 for

SCREEN ADJUSTMENTS.

Lock Mode:



Too soft Too loud

Adjust H. / V. Position, Clock and Phase automatically.

ENGLISH

<OSD>

Hold the MENU button and turn on the monitor when the monitor is power-off, it will lock/unlock the OSD Key Lock function.

Pressing and holding the MENU button for 7-8 seconds when Menu is not displayed, will lock/unlock the Power/OSD Key Lock function.

OPERATING THE MONITOR 15

Page 20

SCREEN ADJUSTMENTS

Adjust the image by following the procedure below to get the desired picture when selecting Analog input.

The screen adjustments described in this manual are designed to set image position and minimize



ﬂ icker or blur for the particular computer in use.

The monitor is designed to provide the best performance at resolution of 1920 × 1080, but can not



provide the best at resolutions of less than 1920 × 1080 because the picture is automatically stretched to ﬁ t the full screen. It is recommended to operate at resolution of 1920 × 1080 in normal use.

Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to



the screen enlargement process.

It is preferable to adjust the image position and frequency with the monitor controls, rather than the



computer software or utilities.

ENGLISH

Perform adjustments after a warm-up period of at least thirty minutes.



Additional adjustments may be required after the Auto Adjust depending on the resolution or signal



timing.

The Auto Adjust may not work correctly when displaying the picture other than the screen adjustment



pattern. In this case, manual adjustments are required.

There are two ways to adjust the screen. One way is automatic adjustment for Position, Clock and Phase. The other way is performing each adjustment manually. Perform the Auto Adjust first when the monitor is connected to a new computer, or resolution is changed. If the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust, manual adjustments are required. Both adjustments should be made by using the screen adjustment pattern (Test.bmp) obtained via the IIYAMA web site (http://www.iiyama. com).

Adjust the image by following the procedure below to get the desired picture. This manual explains adjustment under Windows 95/98/2000/Me/XP/Vista/7.

Display the picture at the optimum resolution.

Enter the Test.bmp (screen adjustment pattern) to wallpaper.

NOTE

Consult the appropriate documentation for doing this.



Test.bmp is made at resolution of 1280 × 1024. Set the display position to center in the



wallpaper setting dialogue box. If you use Microsoft

PLUS! 95/98 cancel the setting of

“Stretch desktop wallpaper to ﬁ t the screen”.

[Adjustment pattern]

Zebra pattern

16 OPERATING THE MONITOR

Color bar

Picture frame

Page 21

Press the AUTO Button. (Auto Adjust)

Adjust the image manually by following procedure below when the screen has a ﬂ icker or

blur, or the picture does not ﬁ t in the display area after performing the Auto Adjust.

Adjust the V.Position so that the top and bottom of the picture frame will ﬁ t to the display

area.

1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of

the display area.

ENGLISH

2) Stretch the right side of the picture frame to the right edge of the display area by

adjusting the Clock.

When the left side of the picture frame moves apart from the left edge of the display

NOTE



area during the Clock adjustment, adjust steps 1) and 2).

Another way to make the Clock adjustment is to correct the vertical wavy lines in the



zebra pattern.

The picture may ﬂ icker during the Clock, H.Position and V.Position adjustment.



In case the picture frame is bigger or smaller than the data display area after the Clock



adjustment, repeat steps from C.

OPERATING THE MONITOR 17

Page 22

Adjust the Phase to correct horizontal wavy noise, ﬂ icker or blur in the zebra pattern.

NOTE

In case the strong ﬂ icker or blurs remain on a part of the screen, repeat steps F and



because the Clock may not be adjusted correctly. If the ﬂ icker or blurs still remain,

set the refresh rate of computer to low (60Hz) and repeat steps from C again.

ENGLISH

Adjust the H.Position after the Phase adjustment if the horizontal position moves during



the adjustment.

Adjust the Brightness and Color to get the desired picture after you complete the Clock and

Phase adjustments.

Put back your favorite wallpaper.

18 OPERATING THE MONITOR

Page 23

POWER MANAGEMENT FEATURE

The power management feature of this product complies with power saving requirement of ENERGY

STAR the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below. The power management function, including any timer settings is configured by the operating system. Check your operating system manual for information on how this can be conﬁ gured.



and VESA DPMS. When activated, it automatically reduces unnecessary power consumption of

Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor enters into Power Management Mode which reduces the power consumption to less than 1W. The screen becomes dark, and the power indicator turns to orange. From Power Management Mode, the image reappears in several seconds when either the keyboard or the mouse are touched again.

Power Indicator

ENGLISH

NOTE

NORMAL MODE

POWER MANAGEMENT MODE

Even when using the power management mode, the monitor consumes electricity. Turn



Blue

Orange

POWER CONSUMPTION

0 1W 100%

off the Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consumption. It is possible that the video signal from the computer may be on while the H or V sync



signal is missing. In this instance, the POWER MANAGEMENT feature may not work properly.

OPERATING THE MONITOR 19

Page 24

TROUBLE SHOOTING

If the monitor fails to operate correctly, please follow the steps below for a possible solution.

Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2.

2. Consult the following items if you cannot ﬁ nd an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists.

If you are experiencing a problem which is not described below or you cannot correct the

3. problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance.

Problem Check

The picture does

ENGLISH

not appear.

(Power indicator does not light up.)

The AC Adapter is ﬁ rmly seated in the connector.

 

The Power Cable is ﬁ rmly seated in the socket of the AC Adapter. The Power Cable is ﬁ rmly seated in the socket.



The Power Switch is turned ON.



The AC socket is live. Please check with another piece of equipment.



(Power indicator is blue.)

(Power indicator is orange.)

The screen is not

synchronized.

The screen

position is not in the center.

If the blank screen saver is in active mode, touch the keyboard or the



mouse. Increase the Contrast and/or Brightness.

 

The computer is ON.



The Signal Cable is properly connected. The signal timing of the computer is within the speciﬁ cation of the monitor.



If the monitor is in power management mode, touch the keyboard or the



mouse. The computer is ON.



The Signal Cable is properly connected.

 

The signal timing of the computer is within the speciﬁ cation of the monitor.

The Signal Cable is properly connected.



The signal timing of the computer is within the speciﬁ cation of the monitor.



The video output level of the computer is within the specification of the



monitor.

The signal timing of the computer is within the speciﬁ cation of the monitor.



The screen is too

bright or too dark.

The screen is

shaking.

20 TROUBLE SHOOTING

The video output level of the computer is within the specification of the



monitor.

The power voltage is within the speciﬁ cation of the monitor.



The signal timing of the computer is within the speciﬁ cation of the monitor.



Page 25

Problem Check

No sound.

The sound is too

loud or too quiet.

A strange noise is

heard.

The audio equipment (computer etc.) is ON.



The Audio Cable is properly connected.



The Volume is turned up.



The Mute is OFF.

 

The audio output level of the audio equipment is within the speciﬁ cation of the monitor.

The audio output level of the audio equipment is within the speciﬁ cation of



the monitor.

The Audio Cable is properly connected.



ENGLISH

RECYCLING INFORMATION

For better environment protection please don't dispose your monitor.

Please visit our web site: www.iiyama.com/recycle for monitor recycling.

TROUBLESHOOTING / RECYCLING INFORMATION 21

Page 26

APPENDIX

SPECIFICATIONS : ProLite E2271HDS

Size Category 22" LCD Panel Driving system

a-Si TFT Active Matrix

Diagonal: 21.5" (55cm)Size

Display Colors

ENGLISH

Sync Frequency

Pixel pitch Brightness Contrast ratio Viewable angle Response time

0.248mm H × 0.248mm V

250cd/m

(Typical) 1000 : 1 (Typical), ACR Function Available Right / Left : 85 degrees each, Up / Down: 80 degrees each (Typical)

5ms (Black, White, Black) Approx.16.7M Analog: Horizontal: 24.0-80.0kHz, Vertical: 55-75Hz

Digital: Horizontal: 30.0-80.0kHz, Vertical: 55-75Hz Maximum Resolution Input Connector

Plug & Play VESA DDC2B

1920 × 1080, 2.1 MegaPixels

D-Sub mini 15 pin, DVI-D 24 pin, HDMI

Input Sync Signal Separate sync: TTL, Positive or Negative Input Video Signal

Analog: 0.7Vp-p (Standard), 75 Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance Digital: HDMI(Ver.1.3)

Input Audio Connector ø 3.5mm mini jack (Stereo)

Positive

Ω,

Input Audio Signal 1.0Vrms maximum Speakers 1W × 2 (Stereo speakers) Maximum Screen Size 476.6mm W × 268.1mm H / 18.8" W × 10.6" H Power Source 12VDC, 3.75A AC Adapter (accessory) Input: 100-240VAC, 50/60Hz

21W typical, Power management mode: 1W maximumPower Consumption* Dimensions / Net Weight 525.5 × 376.0 × 166.0mm / 20.7 × 14.8 × 6.5" (W×H×D)

2.9kg / 6.4lbs (Excluding the AC Adapter)

Tilt Angle

Environmental Considerations

Approvals

NOTE

* Audio equipment is not connected.

Upward: 12 degrees Downward: 3 degrees

Operating: Temperature

Humidity

Storage:

Temperature Humidity

5 to 35°C / 41 to 95°F

10 to 80% (No condensation)

-20 to 60°C / -4 to 140°F 5 to 85% (No condensation)

CE, TÜV-Bauart, VCCI-B, Energy Star

22 APPENDIX

Page 27

SPECIFICATIONS : ProLite E2271HDSD

Size Category 22"

LCD Panel Driving system

a-Si TFT Active Matrix

Diagonal: 21.5" (55cm)Size Pixel pitch Brightness Contrast ratio Viewable angle Response time

Display Colors Sync Frequency

0.248mm H × 0.248mm V

250cd/m

(Typical) 1000 : 1 (Typical), ACR Function Available Right / Left : 85 degrees each, Up / Down: 80 degrees each (Typical)

5ms (Black, White, Black) Approx.16.7M Analog: Horizontal: 24.0-80.0kHz, Vertical: 55-75Hz

Digital: Horizontal: 30.0-80.0kHz, Vertical: 55-75Hz Maximum Resolution Input Connector

Plug & Play VESA DDC2B

1920 × 1080, 2.1 MegaPixels

D-Sub mini 15 pin, DVI-D 24 pin

Input Sync Signal Separate sync: TTL, Positive or Negative Input Video Signal

Analog: 0.7Vp-p (Standard), 75

Positive

Ω,

Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance

Input Audio Connector ø 3.5mm mini jack (Stereo)

ENGLISH

Input Audio Signal 1.0Vrms maximum Speakers 1W × 2 (Stereo speakers) Maximum Screen Size 476.6mm W × 268.1mm H / 18.8" W × 10.6" H Power Source 12VDC, 3.75A

AC Adapter (accessory) Input: 100-240VAC, 50/60Hz

21W typical, Power management mode: 1W maximumPower Consumption*

Dimensions / Net Weight 525.5 × 376.0 × 166.0mm / 20.7 × 14.8 × 6.5" (W×H×D)

2.9kg / 6.4lbs (Excluding the AC Adapter)

Tilt Angle

Environmental Considerations

Approvals

NOTE

* Audio equipment is not connected.

Upward: 12 degrees Downward: 3 degrees

Operating: Temperature

Humidity

Storage:

Temperature Humidity

5 to 35°C / 41 to 95°F

10 to 80% (No condensation)

-20 to 60°C / -4 to 140°F 5 to 85% (No condensation)

CE, TÜV-Bauart, VCCI-B, Energy Star

APPENDIX 23

Page 28

DIMENSIONS

525.5mm/20.7"

478.0mm/18.8"

268.0mm/10.6"

ENGLISH

COMPLIANT TIMING

Video Mode

VGA

SVGA

VESA

Macintosh

PC9801

XGA 1024 × 768

SXGA

WXGA+

WSXGA+ Full HD

640 × 480

800 × 600

1280 × 1024

1440 × 900

1680 × 1050 1920 × 1080

640 × 480 832 × 624

1024 × 768

640 × 400

37.5mm/1.5"

18.5mm /0.7"

269.5mm/10.6"

332.0mm/13.1"

Horizontal

Frequency

31.469kHz

37.500kHz

37.861kHz

35.156kHz

37.879kHz

46.875kHz

48.077kHz

48.363kHz

56.476kHz

60.023kHz

63.981kHz

79.976kHz

55.935kHz

70.635kHz

65.290kHz

66.590kHz

35.000kHz

49.725kHz

60.150kHz

24.827kHz

376.0mm/14.8"

Vertical

Frequency

59.940Hz

75.000Hz

72.809Hz

56.250Hz

60.317Hz

75.000Hz

72.188Hz

60.004Hz

70.069Hz

75.029Hz

60.020Hz

75.025Hz

59.887Hz

74.984Hz

60.000Hz

59.930Hz

66.667Hz

74.500Hz

74.720Hz

56.424Hz

Dot Clock

25.175MHz

31.500MHz

36.000MHz

40.000MHz

49.500MHz

50.000MHz

65.000MHz

75.000MHz

78.750MHz

108.000MHz

135.000MHz

106.500MHz

136.750MHz

146.250MHz

138.500MHz

30.240MHz

57.283MHz

80.000MHz

21.053MHz

166.0mm/6.5"

NOTE

24 APPENDIX

* Digital input is not compliant.

M064A21