Iiyama E2003WS, E2003WSV, E2001WSV User Manual

USER MANUAL

ENGLISH

DEUTSCH

FRANCAIS

NEDERLANDS

Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.

PLE2001_3WS_WSV-e-M034B01.P65 2007/09/11, 10:121

ITALIANO

POLSKI

Congratulations!

The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment.

ENGLISH

Some of the features of the TCO’03 Display requirements:

Ergonomics

• Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability.

Energy

• Energy-saving mode after a certain time – beneficial both for the user and the environment

• Electrical safety

Emissions

• Electromagnetic fields

• Noise emissions

Ecology

• The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 001

• Restrictions on o chlorinated and brominated flame retardants and polymers o heavy metals such as cadmium, mercury and lead.

The requirements included in this label have been developed by TCO Development in cooperation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more userfriendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world.

For more information, please visit

www.tcodevelopment.com

PLE2001_3WS_WSV-e-M034B01.P65 2007/09/10, 18:192

FCC DECLARATION OF CONFORMITY

Model Number: Trade Name: iiyama Responsible party: Ampronix Inc. Address: 8697 Research Dr. Irvine, CA.92618 U.S.A. Telephone number: 949-788-9930

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for Class B Personal Computers and peripherals, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the device is operated in a residential environment. This device generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If you determine the device does cause harmful interference to radio or television reception (this may be determined by monitoring the interference while turning the device off and on), you are encouraged to try to correct the interference by one of the following measures:

To meet the FCC requirements, you should use a signal cable with ferrite core at both ends.

PL2000

 Reorient or relocate the receiving antenna.  Increase the separation between the device and receiver.  Connect the device into an outlet on a circuit different from that to which the receiver

is connected.

 Consult the dealer or an experienced radio or TV technician for help.

CAUTION Changes or modifications not expressly approved by IIYAMA could void the users authority

to operate the device under FCC compliance regulations.

ENGLISH

CANADIAN DEPARTMENT OF COMMUNICATIONS COMPLIANCE STATEMENT

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulation of the Canadian department of communications.

CE MARKING DECLARATION OF CONFORMITY

This LCD monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” and 73/23/ EEC “Low Voltage Directive” as amended by Directive 93/68/EEC. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas,

business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterised by their connection to the public low voltage power supply system.

 We reserve the right to change specifications without notice.  All trademarks used in this user manual are the property of their respective owners.

 As an E

PLE2001_3WS_WSV-e-M034B01.P65 2007/09/10, 18:193

NERGY STAR

energy efficiency.

Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines for

ENGLISH

TABLE OF CONTENTS

FOR YOUR SAFETY .............................................................................. 1

SAFETY PRECAUTIONS ................................................................. 1

SPECIAL NOTES ON LCD MONITORS ............................................. 3

CUSTOMER SERVICE ...................................................................... 3

CLEANING ....................................................................................... 3

BEFORE YOU OPERATE THE MONITOR ................................................ 4

FEATURES ....................................................................................... 4

CHECKING THE CONTENTS OF THE PACKAGE ............................. 4

HOW TO USE THE STAND .............................................................. 5

CONTROLS AND CONNECTORS .................................................... 6

CONNECTING YOUR MONITOR ...................................................... 7

COMPUTER SETTING ....................................................................... 8

ADJUSTING THE VIEWING ANGLE ................................................. 8

OPERATING THE MONITOR ................................................................... 9

ADJUSTMENT MENU CONTENTS .................................................... 10

SCREEN ADJUSTMENTS ................................................................. 14

POWER MANAGEMENT FEATURE .................................................. 17

TROUBLE SHOOTING ............................................................................ 18

RECYCLING INFORMATION ................................................................... 19

APPENDIX .............................................................................................. 20

SPECIFICATIONS ............................................................................. 20

DIMENSIONS .................................................................................... 24

COMPLIANT TIMING ......................................................................... 24

CONNECTOR PIN ASSIGNMENT ...................................................... 25

Regulatory information : The high efficiency LCD backlights used in this product contains 5mg or less of Mercury, the disposal of which may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (www.eiae.org). This information is only for U.S.A..

We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle information is obtained via the Internet, using the address: http://www.iiyama.com You can access the Web page of different countries from there.

PLE2001_3WS_WSV-e-M034B01.P65 2007/10/02, 13:054

FOR YOUR SAFETY

SAFETY PRECAUTIONS

WARNING

STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE

If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock.

NEVER REMOVE THE CABINET

High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.

DO NOT PUT ANY OBJECT INTO THE MONITOR

Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any object inside may cause fire, electric shock or damage.

INSTALL THE MONITOR ON A FLAT, STABLE SURFACE

The monitor may cause an injury if it falls or is dropped.

DO NOT USE THE MONITOR NEAR WATER

Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric shock.

ENGLISH

OPERATE UNDER THE SPECIFIED POWER SUPPLY

Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will cause malfunction and may cause fire or electric shock.

PROTECT THE CABLES

Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy objects on the cables. If damaged, the cables may cause fire or electric shock.

ADVERSE WEATHER CONDITIONS

It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in power may cause malfunction. It is also advised not to touch the plug in these circumstances as it may cause electric shock.

FOR YOUR SAFETY 1

PLE2001_3WS_WSV-e-M034B01.P65 2007/09/10, 18:195

CAUTION

INSTALLATION LOCATION

Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor.

DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION

The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may not pull the cables and possibly cause injury.

MAINTAIN GOOD VENTILATION

Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause

ENGLISH

fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls. Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet will be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft material may also cause damage.

DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR

When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable is disconnected. If you do not disconnect them, it may cause fire or electric shock.

UNPLUG THE MONITOR

If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.

HOLD THE PLUG WHEN DISCONNECTING

To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself as this may cause fire or electric shock.

DO NOT TOUCH THE PLUG WITH WET HANDS

Pulling or inserting the plug with wet hands may cause electric shock.

WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER

Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage your computer.

DO NOT PUT FLOPPY DISKS NEAR THE SPEAKERS

Magnetically recorded data, such as on a floppy disk, may become corrupted by the magnetic field produced by the speakers if the disks are placed on or near the speakers.

OTHERS

ERGONOMIC RECOMMENDATIONS

To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is recommended as looking at the screen continuously can cause eye strain.

2 FOR YOUR SAFETY

PLE2001_3WS_WSV-e-M034B01.P65 2007/09/10, 18:196

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitors and do not indicate a problem.

NOTE

When you first turn on the LCD monitor, the picture may not fit in the display area



because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may flicker during initial use. Turn off



the Power Switch and then turn it on again to make sure the flicker disappears. You may find slightly uneven brightness on the screen depending on the desktop



pattern you use.



Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off the Power Switch for hours.



Contact your dealer or iiyama service center for the backlight replacement when the screen is dark, flickering or not lighting up. Never attempt to replace it by yourself.

CUSTOMER SERVICE



NOTE

The fluorescent light used in the LCD monitor may have to be periodically replaced. For the warranty coverage on this component, please check with local iiyama service center. If you have to return your unit for service and the original packaging has been



discarded, please contact your dealer or iiyama service center for advice or replacement packaging.

ENGLISH

CLEANING

WARNING

CAUTION

NOTE To protect the LCD panel, do not scratch or rub the screen with a hard object.

CABINET

LCD SCREEN

PLE2001_3WS_WSV-e-M034B01.P65 2007/09/10, 18:197

If you drop any materials or liquids such as water into the monitor when cleaning,



unplug the power cable immediately and contact your dealer or iiyama service center.

For safety reasons, turn off the power switch and unplug the monitor before you



clean it.



Never use any of the following strong solvents. These will damage the cabinet and



the LCD screen.

Thinner Benzine Abrasive cleaner

Touching the cabinet with any product made from rubber or plastic for a long time



may cause degeneration or loss of paint on the cabinet.

Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then wipe the cabinet with a soft dry cloth.

Periodic cleaning with a soft dry cloth is recommended. Don't use tissue paper etc. because these will damage the LCD screen.

Spray-type cleaner Wax Acid or Alkaline solvent

FOR YOUR SAFETY 3

BEFORE YOU OPERATE THE MONITOR

FEATURES



 51.1cm (20.1") TFT Color LCD Monitor



 Supports Resolutions up to 1680 × 1050



 High Contrast 1000:1 / Quick Response Time 5ms : ProLite E2001



 High Contrast 2000:1 (DCR) / Quick Response Time 2ms (Gray to Gray) :



ProLite E2003



 Digital Character Smoothing



 Automatic Set-up



ENGLISH



 Stereo Speakers



2 × 1W Stereo Speakers



 Plug & Play VESA DDC2B Compliant



Windows



 Power Management (E



 Ergonomic Design: TCO ’03 and MPR



 Digital Input (DVI-D, HDCP Compliant) for Clear Display :



ProLite E2001WS / E2003WS



 VESA Mounting Standard (100mm×100mm) Compliant



95/98/2000/Me/XP/Vista Compliant

NERGY STA R

VESA DPMS Compliant)

3 Approved

CHEKING THE CONTENTS OF THE PACKAGE

The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office.

 Power Cable*  Audio Cable  Stand  User Manual

CAUTION

4 BEFORE YOU OPERATE THE MONITOR

PLE2001_3WS_WSV-e-M034B01.P65 2007/09/10, 18:198

The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using

a power supply higher than this rating, then a power cable with a rating of 10A/ 250V must be used.However, all guarantees and warranties are void for any problems or damage caused by a power cable not supplied by iiyama.

Accessory for ProLite E2001WS / E2003WS

 D-Sub Signal Cable  DVI -D Signal Cable*

HOW TO USE THE STAND

The monitor is shipped with the stand detached. Be sure to attach the stand before operating the display and remove if it is necessary to re-box.

CAUTION

1. Put a piece of soft cloth on the table

beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.

2. The Stand-Bottom is pulled up as shown in

the figure.

3. Install the Stand-Base to the Stand-Bottom.

1. Put a piece of soft cloth on the table

beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.

2. Hold down the hooks outside and pull the

Stand-Base away from the Stand-Bottom.

Install the Stand on a stable surface. The monitor may cause injury or damage if



it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage.

 

Unplug the monitor before installation to avoid electric shock or damage.

ENGLISH

PLE2001_3WS_WSV-e-M034B01.P65 2007/09/10, 18:199

BEFORE YOU OPERATE THE MONITOR 5

+ 21 hidden pages